softScheck/tplink-smartplug issues and pull requests

#103 - Added energy reset and runtime reset

Pull Request - State: closed - Opened by chou2008 almost 2 years ago - 1 comment

#101 - Failed to connect to host ...

Issue - State: open - Opened by sominaik over 2 years ago

#100 - bad argument #2 to 'Proto'

Issue - State: open - Opened by jimlynnjulian about 3 years ago - 3 comments

#99 - JSON commands don't seem to work

Issue - State: open - Opened by aggillator over 3 years ago - 3 comments

#98 - temp enable on hs110

Issue - State: open - Opened by Zibri over 3 years ago - 1 comment

#97 - INFO REQUEST: HS110 Calibration

Issue - State: open - Opened by Zibri over 3 years ago

#96 - Faster version

Issue - State: open - Opened by janwiesemann over 3 years ago

#95 - Add ledon/ledoff to commands list in README.md

Pull Request - State: closed - Opened by robertyoung81 over 3 years ago

#94 - KS220M(US) Dump - WIP

Issue - State: open - Opened by natemacinnes over 3 years ago - 2 comments

#93 - Adds command to turn on Device LED (Night mode)

Pull Request - State: closed - Opened by smford over 3 years ago

#92 - Dissector for the UDP discovery

Issue - State: open - Opened by pascal-fb-martin almost 4 years ago - 2 comments

#91 - Create main.yml

Pull Request - State: closed - Opened by G7h7 almost 4 years ago - 1 comment

#90 - google home seamless setup

Issue - State: open - Opened by beckmx almost 4 years ago

#89 - How might I assign a static IP via the devices themselves?

Issue - State: open - Opened by falcorr almost 4 years ago

#88 - Support for multi device KP200

Issue - State: open - Opened by jbuehl over 4 years ago

#87 - Works with KP115

Issue - State: open - Opened by chrisg30 over 4 years ago - 3 comments

#86 - Problem Controll TP Link HS110

Issue - State: open - Opened by rene100575 over 4 years ago

#85 - Fix character encoding of response

Pull Request - State: closed - Opened by oheim over 4 years ago - 1 comment

#84 - Extraneous 'f' in tplink_smartplug.py causing Python error

Issue - State: closed - Opened by Maxhawkgt over 4 years ago - 1 comment

#83 - KP400 dual port control

Issue - State: open - Opened by darouss99 over 4 years ago - 3 comments

#82 - Add support for new handshake protocol

Pull Request - State: open - Opened by watfordjc over 4 years ago

#81 - HS100 Hardware V4.1 Firmware 1.1.0 - No Longer Working - No Port 9999

Issue - State: open - Opened by ghostseven over 4 years ago - 30 comments

#79 - Add option for individual outlet control on HS300 and HS303 power strips

Pull Request - State: open - Opened by AMDHome almost 5 years ago - 2 comments

#78 - Set mac address

Issue - State: open - Opened by wecoy76 almost 5 years ago - 1 comment

#77 - HS103 and KP400

Issue - State: open - Opened by tmo1 almost 5 years ago

#76 - Firmware source code

Issue - State: open - Opened by WuerfelDev almost 5 years ago

#75 - fixes to tddp client, ability to send data payloads, and subtypes found to work with TL-WPA7510

Pull Request - State: open - Opened by dfberger about 5 years ago

#74 - Turning on from a raspberry pi

Issue - State: closed - Opened by annunity about 5 years ago - 1 comment

#73 - Tplink KC100 spot ipcam

Issue - State: open - Opened by WhitecastlePT about 5 years ago - 7 comments

#72 - Add timeout argument

Pull Request - State: closed - Opened by fuegas about 5 years ago

#71 - How to change hostname

Issue - State: open - Opened by nospam2k about 5 years ago

#70 - Unable to communicate with the HS110 plug anymore

Issue - State: open - Opened by Hir0-84 about 5 years ago - 7 comments

#69 - Updated for python 3 compatibility, added json encoding

Pull Request - State: closed - Opened by jmcnatt about 5 years ago

#68 - TP-Link Tapo devices

Issue - State: open - Opened by tnmendes over 5 years ago - 2 comments

#67 - Refactored for native python3 support (maintain python2 support with version detection)

Pull Request - State: closed - Opened by AMDHome over 5 years ago - 1 comment

#66 - UDP Discovery packet

Issue - State: open - Opened by Vortexhunter over 5 years ago - 2 comments

#65 - Added settime.sh script

Pull Request - State: open - Opened by JsBergbau over 5 years ago - 1 comment

#64 - Tempbranch

Pull Request - State: closed - Opened by JsBergbau over 5 years ago

#63 - Extra " in JSON documentation commands, file tplink-smarthome-commands.txt

Issue - State: closed - Opened by jmllamasg over 5 years ago - 1 comment

#62 - HS210 3-way Switch Support?

Issue - State: open - Opened by lotek4u over 5 years ago

#61 - HS300 returns 5 children (plugs), when 6 is expected

Issue - State: open - Opened by amccombsahce almost 6 years ago - 5 comments

#60 - set_ commands do not seem to work

Issue - State: open - Opened by berkinet almost 6 years ago - 1 comment

#59 - Broadcast state changes

Issue - State: open - Opened by berkinet almost 6 years ago - 2 comments

#58 - Update tplink_smartplug.py

Pull Request - State: closed - Opened by michris about 6 years ago - 2 comments

#57 - Json

Pull Request - State: closed - Opened by harryherbig over 6 years ago

#56 - Connect to Wifi wrong sequence in commandlist

Issue - State: closed - Opened by JsBergbau over 6 years ago

#55 - add docker support

Pull Request - State: closed - Opened by Zetanova over 6 years ago - 1 comment

#54 - Please accept one of the pull requests for clean json output.

Issue - State: closed - Opened by leifnel over 6 years ago - 2 comments

#53 - Added -q for json only

Pull Request - State: closed - Opened by leifnel over 6 years ago

#52 - Allow pushing results to influxdb

Pull Request - State: open - Opened by tvwerkhoven over 6 years ago

#51 - Print json output only, allowing easier parsing with e.g. jq

Pull Request - State: closed - Opened by tvwerkhoven over 6 years ago - 1 comment

#50 - Size of answer from device limited to 1024 bytes

Issue - State: open - Opened by fernando-p-jesus over 6 years ago

#49 - Update encryption for new firmware/devices

Issue - State: closed - Opened by Enzo-Matrix over 6 years ago - 2 comments

#48 - TpLink HS300 Powerstip

Issue - State: closed - Opened by rtmurphy almost 7 years ago - 3 comments

#47 - Add "port" parameter

Pull Request - State: closed - Opened by rirethy almost 7 years ago

#46 - Not working on windows 10

Issue - State: closed - Opened by rac8006 almost 7 years ago - 1 comment

#45 - UDP + broadcast support

Pull Request - State: open - Opened by wowczarek about 7 years ago - 2 comments

#44 - Latest Firmware changes 4 byte prefix

Issue - State: closed - Opened by mkillock about 7 years ago - 1 comment

#43 - feature / Enhance commands

Pull Request - State: closed - Opened by blndev about 7 years ago - 1 comment

#42 - Support hostnames

Pull Request - State: closed - Opened by haguenau about 7 years ago - 3 comments

#41 - Not working on latest hardware v3.0, firmware v1.5.2

Issue - State: closed - Opened by thiemob about 7 years ago - 8 comments

#40 - How to for Default OFF?

Issue - State: open - Opened by Zibri about 7 years ago - 1 comment

#39 - THANK YOU (plus a question on skewed energy monitoring)

Issue - State: open - Opened by aleqx over 7 years ago

#38 - add retry loop

Issue - State: open - Opened by Solarbytes over 7 years ago

#37 - Will this work with other smartplugs?

Issue - State: open - Opened by Gunpowderchant over 7 years ago

#36 - opening the whole thing ( got root )

Issue - State: open - Opened by aep over 7 years ago - 3 comments

#35 - Add support for HS105 protocol

Pull Request - State: closed - Opened by haguenau over 7 years ago - 2 comments

#34 - Run tplink-smartplug on Windows win_inet_pton

Issue - State: closed - Opened by jhalbrecht over 7 years ago - 1 comment

#33 - Add DNS resolution

Issue - State: closed - Opened by debuti over 7 years ago - 1 comment

#32 - Troubleshooting tplink-smartplug.py

Issue - State: closed - Opened by jhalbrecht over 7 years ago - 1 comment

#31 - License for copied code?

Issue - State: closed - Opened by HankB over 7 years ago - 1 comment

#30 - Flash firmware via tplink-smartplug

Issue - State: open - Opened by tmeyerinfo over 7 years ago - 1 comment

#29 - schedule

Issue - State: closed - Opened by Donal2 over 7 years ago - 2 comments

#28 - Thanks. How does calibration work please ?

Issue - State: open - Opened by allotmentearthy over 7 years ago - 2 comments

#27 - make it work with hs105

Pull Request - State: closed - Opened by kchiem over 7 years ago

#26 - Thanks

Issue - State: open - Opened by mp-smith over 7 years ago - 1 comment

#25 - Added Python 3.x and maintain Python>2.6 compatibility.

Pull Request - State: closed - Opened by mjfwest almost 8 years ago - 1 comment

#24 - Changed to python3 compatibility and PEP8 style guidelines.

Pull Request - State: closed - Opened by mjfwest almost 8 years ago - 1 comment

#23 - Works with H100 (AU) HW: 2.0, SW:1.0.10 now

Pull Request - State: closed - Opened by uwwint almost 8 years ago - 4 comments

#22 - Cannot get working with smartPlug_CE_HS100(AU)_HS110(AU)

Issue - State: open - Opened by mamejay almost 8 years ago - 8 comments

#21 - Empty result?

Issue - State: closed - Opened by maxdad almost 8 years ago - 1 comment

#20 - Python3 support

Issue - State: closed - Opened by droberin about 8 years ago - 7 comments

#19 - Two very minor issues with README.md

Issue - State: closed - Opened by gowenfawr about 8 years ago - 1 comment

#18 - Please help fix error

Issue - State: closed - Opened by Raito00 about 8 years ago - 1 comment

#17 - Simulation of an LB130 or sth. else

Issue - State: open - Opened by ovi1337 about 8 years ago - 1 comment

#16 - Error using JSON commands

Issue - State: closed - Opened by ryanwoconnor about 8 years ago - 3 comments

#15 - Added verbose flag to print verbose output

Pull Request - State: closed - Opened by djhworld about 8 years ago - 1 comment

#14 - LB130 RGB Light

Issue - State: open - Opened by JohnnyErnest about 8 years ago - 8 comments

#13 - How to control the plug remotely

Issue - State: open - Opened by GanZ2016 about 8 years ago - 2 comments

#12 - Which command to get the runtime values and statistics?

Issue - State: open - Opened by PatrickBB29 about 8 years ago - 5 comments

#11 - Error asking for argument already specified...

Issue - State: open - Opened by ChopOMatic about 8 years ago - 8 comments

#10 - Firmware Versions ...

Issue - State: open - Opened by dan-and about 8 years ago - 12 comments

#9 - [Request] Better handling of JSON -j option

Issue - State: closed - Opened by TFWol over 8 years ago - 3 comments

#8 - Added Java Support

Pull Request - State: closed - Opened by pbuckley4192 over 8 years ago - 1 comment

#7 - Update and rename tplink-smartplug.py to tplink_smartplug.py to also run as module

Pull Request - State: closed - Opened by ghost over 8 years ago - 1 comment

#6 - add add support for lightbulbs

Pull Request - State: open - Opened by konsumer over 8 years ago - 2 comments

#5 - add wireshark support for UDP

Pull Request - State: closed - Opened by konsumer over 8 years ago - 3 comments

GitHub / softScheck/tplink-smartplug issues and pull requests