Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / sicxu/Deep3DFaceRecon_pytorch issues and pull requests
#103 - each output mesh has different vertex ID's
Issue -
State: closed - Opened by adevra about 2 years ago
- 2 comments
#102 - how to change pth model to onnx model
Issue -
State: open - Opened by sunjunlishi about 2 years ago
- 1 comment
#101 - [F glutil.cpp:338] eglInitialize() failed Aborted
Issue -
State: closed - Opened by goldwater668 about 2 years ago
- 1 comment
#100 - The Antialiasing Operation of nvdiffrast
Issue -
State: closed - Opened by JiejiangWu about 2 years ago
- 2 comments
#99 - nvcc warning : The -std=c++14 flag is not supported with the configured host compiler. Flag will be ignored
Issue -
State: open - Opened by goldwater668 over 2 years ago
- 1 comment
#98 - Deploy on a mobile device
Issue -
State: open - Opened by rose-jinyang over 2 years ago
#97 - How to convert reusult mesh to standard BFM2009?
Issue -
State: open - Opened by skeras over 2 years ago
- 2 comments
#96 - question about 5-point detection
Issue -
State: closed - Opened by LY-Donkey-Burger over 2 years ago
- 2 comments
#95 - Could not locate a supported Microsoft Visual C++ installation
Issue -
State: closed - Opened by adevra over 2 years ago
- 1 comment
#94 - some suggestion of environment
Issue -
State: closed - Opened by Dhaizei over 2 years ago
- 1 comment
#93 - Outputs nothing in any folder, no clue how to fix.
Issue -
State: closed - Opened by GarnetSunset over 2 years ago
- 12 comments
#92 - Could you share using which tools to pick the points used in the reflectance loss?
Issue -
State: closed - Opened by ZhenyanSun over 2 years ago
- 2 comments
#91 - 我只看了一眼 就发现一个单词写错了
Issue -
State: closed - Opened by CTGU-sh over 2 years ago
#90 - How can i display or save only the reconstructed face image?
Issue -
State: open - Opened by yunY20 over 2 years ago
- 1 comment
#89 - The size of tensor a (35709) must match the size of tensor b (53215)
Issue -
State: closed - Opened by ra1995 over 2 years ago
- 1 comment
#88 - Can this solution generate 3D model with less mesh points?
Issue -
State: open - Opened by bin1guo over 2 years ago
#87 - obj with original transforms
Issue -
State: open - Opened by brurpo over 2 years ago
- 2 comments
#86 - Error C7528: OpenGL reserves names starting with 'gl_': gl_PrimitiveID
Issue -
State: closed - Opened by geek0075 over 2 years ago
- 7 comments
#85 - how to get the *.txt file about facial landmarks?
Issue -
State: closed - Opened by sablea over 2 years ago
- 6 comments
#84 - How to adjust focal, center, camera_d, z_near, z_far, when changing input image size from 224*224 to 512*512
Issue -
State: closed - Opened by chinaandylee over 2 years ago
- 2 comments
#83 - why rescale_factor=102 in align_img?
Issue -
State: closed - Opened by chinaandylee over 2 years ago
- 2 comments
#82 - uv_idx of deep3d
Issue -
State: closed - Opened by VictoryLoveJessica over 2 years ago
#81 - The problem of "[F glutil.cpp:338] eglInitialize() failed Aborted (core dumped)".
Issue -
State: open - Opened by ChenVoid over 2 years ago
- 3 comments
#80 - Evaluation index problem
Issue -
State: closed - Opened by NewtOliver over 2 years ago
#79 - 无法加载数据
Issue -
State: open - Opened by zhou431496 over 2 years ago
#78 - subprocess.CalledProcessError: Command '['which', 'c++']' returned non-zero exit status 1.
Issue -
State: open - Opened by Bruce-ywj over 2 years ago
- 2 comments
#77 - No module named 'torch'
Issue -
State: open - Opened by davidSirovsky over 2 years ago
- 1 comment
#76 - I use the original 2017model,but I always get nothing expect 0 from the dr.interpolate. How should I transfer my data.
Issue -
State: open - Opened by ZhenyanSun over 2 years ago
- 3 comments
#75 - high reconstruct error on now challenge
Issue -
State: open - Opened by HITKJ over 2 years ago
- 15 comments
#74 - Can't train
Issue -
State: closed - Opened by NewtOliver over 2 years ago
#73 - R-Net
Issue -
State: closed - Opened by NewtOliver over 2 years ago
#72 - RuntimeError: invalid argument 7: equal number of batches expected at /opt/conda/conda-bld/pytorch_1603729128610/work/aten/src/THC/generic/THCTensorMathBlas.cu:32
Issue -
State: closed - Opened by VictoryLoveJessica over 2 years ago
- 4 comments
#71 - About 3dmm model
Issue -
State: closed - Opened by ozhyo over 2 years ago
- 4 comments
#70 - quick question
Issue -
State: open - Opened by 350565935 over 2 years ago
#69 - How to get the index of 3d landmark in BFM model?
Issue -
State: open - Opened by Feywell over 2 years ago
- 1 comment
#68 - how to generate 51 blend shapes in Apple ARKit?
Issue -
State: open - Opened by lucasjinreal over 2 years ago
#67 - Which one performs better compared to FAN in 3d landmark detection?
Issue -
State: closed - Opened by Feywell over 2 years ago
- 1 comment
#66 - does it able to run in realtime?
Issue -
State: open - Opened by lucasjinreal over 2 years ago
#65 - Why the 3d landmark is reversed?
Issue -
State: closed - Opened by Feywell over 2 years ago
- 1 comment
#64 - How can I use the the novel multi-image face reconstruction methods mentioned in the article
Issue -
State: closed - Opened by ghost almost 3 years ago
- 4 comments
#63 - TypeError: forward() missing 1 required positional argument: 'tri'
Issue -
State: closed - Opened by lphuong304 almost 3 years ago
- 1 comment
#62 - Error: [Errno 20] Not a directory: './checkpoints/model_name/epoch_20.pth/epoch_20.pth'
Issue -
State: closed - Opened by iresusharma almost 3 years ago
#61 - Create LICENSE
Pull Request -
State: closed - Opened by sicxu almost 3 years ago
#60 - paused with the result "killed"
Issue -
State: open - Opened by jasonjoezpy almost 3 years ago
- 1 comment
#59 - The training data discrepency
Issue -
State: closed - Opened by radekd91 almost 3 years ago
- 1 comment
#58 - License for pytorch implementation of Deep3DFaceReconstruction
Issue -
State: closed - Opened by Sibylle-Van-Hove almost 3 years ago
- 1 comment
#56 - The verts of the saved mesh seems been shuffled
Issue -
State: closed - Opened by qiuyuda almost 3 years ago
- 1 comment
#55 - /opt/conda/envs/deep3d_pytorch/lib/python3.6/site-packages/nvdiffrast/common/glutil.h:36:10: fatal error: EGL/egl.h: No such file or directory #include <EGL/egl.h> ^~~~~~~~~~~ compilation terminated. ninja: build stopped: subcommand failed.
Issue -
State: open - Opened by muxiddin19 almost 3 years ago
- 6 comments
#54 - R_TORCH -c /opt/conda/envs/deep3d_pytorch/lib/python3.6/site-packages/nvdiffrast/torch/torch_bindings.cpp -o torch_bindings.o ninja: build stopped: subcommand failed.
Issue -
State: open - Opened by muxiddin19 almost 3 years ago
- 1 comment
#52 - ninja: build stopped: subcommand failed.
Issue -
State: open - Opened by muxiddin19 almost 3 years ago
- 5 comments
#51 - Blue eyes appear when I adjust the render resolution
Issue -
State: closed - Opened by DoubleYanLee almost 3 years ago
- 2 comments
#50 - Can not find 01_MorphableModel.mat link
Issue -
State: closed - Opened by fungtion almost 3 years ago
- 3 comments
#49 - How to get mesh image with original image size?
Issue -
State: open - Opened by Feywell almost 3 years ago
- 5 comments
#48 - What's the implementation of the device?
Issue -
State: closed - Opened by sunshinewhy almost 3 years ago
- 1 comment
#47 - window
Issue -
State: open - Opened by weilenggmj almost 3 years ago
- 4 comments
#46 - How to understand the parameter "camera_d"
Issue -
State: closed - Opened by HarshWinterBytes almost 3 years ago
- 2 comments
#45 - subprocess.CalledProcessError: Command '['ninja', '-v']' returned non-zero exit status 1.
Issue -
State: open - Opened by UestcJay almost 3 years ago
- 6 comments
#44 - setup on CPU only machines
Issue -
State: closed - Opened by Koushik0901 almost 3 years ago
- 2 comments
#43 - How to set focal, z_near and z_far?
Issue -
State: closed - Opened by xjcvip007 almost 3 years ago
- 2 comments
#42 - MICC Florence benchmark
Issue -
State: open - Opened by Bornblack almost 3 years ago
- 2 comments
#41 - Loss Weights in repository different from those in your paper
Issue -
State: closed - Opened by humannumber196 almost 3 years ago
- 5 comments
#40 - OSError: could not read bytes
Issue -
State: closed - Opened by loretoparisi almost 3 years ago
- 1 comment
#39 - FileNotFoundError: [Errno 2] No such file or directory: 'BFM/01_MorphableModel.mat'
Issue -
State: closed - Opened by loretoparisi almost 3 years ago
- 1 comment
#38 - ReadMe suggested change
Pull Request -
State: closed - Opened by aelzeiny about 3 years ago
#37 - How to get 3D keypoints in order to evaluate in NoW challenge?
Issue -
State: closed - Opened by zhih-li about 3 years ago
- 8 comments
#36 - When you compute shape, why don't you use mean expression of Exp_Pca.bin?
Issue -
State: open - Opened by lhyfst about 3 years ago
- 1 comment
#35 - RuntimeError: Ninja is required to load C++ extensions
Issue -
State: closed - Opened by PandaChen-pro about 3 years ago
- 4 comments
#34 - How to extract the texture information and save it as an image
Issue -
State: open - Opened by Koushik0901 about 3 years ago
- 5 comments
#33 - 重建53215个点的face mesh
Issue -
State: open - Opened by zyqlalala about 3 years ago
- 4 comments
#32 - subprocess.CalledProcessError: Command '['ninja', '-v']' returned non-zero exit status 1.
Issue -
State: open - Opened by 2502128021 about 3 years ago
- 27 comments
#31 - How to visualize the face mesh without texture and color?
Issue -
State: open - Opened by YiwuZhong about 3 years ago
- 3 comments
#30 - ImportError: No module named 'nvdiffrast_plugin'
Issue -
State: open - Opened by xjcvip007 about 3 years ago
- 3 comments
#29 - environment set up problem
Issue -
State: open - Opened by Lorickh about 3 years ago
- 3 comments
#28 - landmarks inconsistency
Issue -
State: closed - Opened by CarlenYu about 3 years ago
- 3 comments
#27 - Multi images inferencing
Issue -
State: closed - Opened by icedpanda about 3 years ago
- 5 comments
#26 - Invalid argument 7: equal number of batches expected
Issue -
State: closed - Opened by arstropica about 3 years ago
- 3 comments
#25 - Rescale factor and similarity_Lm3D_all.mat
Issue -
State: open - Opened by humannumber196 about 3 years ago
- 5 comments
#24 - Evaluation Code
Issue -
State: open - Opened by shubhajitbasak about 3 years ago
- 1 comment
#23 - Where should I put the center of image in camera view to align to the mesh ?
Issue -
State: open - Opened by Michaelwhite34 about 3 years ago
- 6 comments
#22 - Include neck and ears in generated model
Issue -
State: closed - Opened by UserCnX about 3 years ago
- 3 comments
#21 - 关于NoW challenge?
Issue -
State: closed - Opened by zyqlalala about 3 years ago
- 7 comments
#20 - 请问一下,我现在想把原图和通过BFM所得到的顶点属性(texture和color)转换到UV空间,这部分要如何实现呢?有什么参考资料吗?
Issue -
State: closed - Opened by 1151537695 about 3 years ago
- 3 comments
#18 - How to make face model straight front as in the gif ?
Issue -
State: open - Opened by Michaelwhite34 about 3 years ago
- 13 comments
#17 - Would you release C-Net model?
Issue -
State: closed - Opened by xjcvip007 about 3 years ago
- 3 comments
#16 - parameters of render z_far and z_near
Issue -
State: closed - Opened by haoxurt about 3 years ago
- 1 comment
#15 - How to use Arcface to recognize the reconstructed 3d face ?
Issue -
State: closed - Opened by gudufengzhongyipilang about 3 years ago
- 1 comment
#14 - Segmentation fault (core dumped) with nvdiffrast
Issue -
State: closed - Opened by TimmmYang about 3 years ago
- 3 comments
#13 - How can I generate the example.gif
Issue -
State: closed - Opened by li-fang over 3 years ago
- 2 comments
#12 - pytorch3d instead of nvdiffrast
Issue -
State: closed - Opened by jonilaserson over 3 years ago
- 12 comments
#11 - fatal error: cuda_runtime_api.h: No such file or directory
Issue -
State: closed - Opened by 1151537695 over 3 years ago
- 3 comments
#10 - IndexError when runing data_preparation.py
Issue -
State: closed - Opened by li-fang over 3 years ago
- 2 comments
Labels: bug
#9 - nvidia dirver version
Issue -
State: closed - Opened by haoxurt over 3 years ago
- 4 comments
#8 - self.glctx = dr.RasterizeGLContext(device=device) return killed
Issue -
State: closed - Opened by haoxurt over 3 years ago
- 1 comment
#7 - Render straight face image
Issue -
State: closed - Opened by 54DL0V3 over 3 years ago
- 1 comment
#6 - mtcnn did not generate the required txt file
Issue -
State: closed - Opened by AKclown over 3 years ago
- 2 comments
#5 - Can't download 01_MorphableModel.mat
Issue -
State: closed - Opened by lucydjo over 3 years ago
- 2 comments
#4 - A test error in Ubuntu 18.04: ninja: build stopped: subcommand failed.
Issue -
State: closed - Opened by switch626 over 3 years ago
- 25 comments
#3 - No output file
Issue -
State: closed - Opened by Michaelwhite34 over 3 years ago
- 14 comments
#2 - [F glutil.cpp:338] eglInitialize() failed Aborted (core dumped)
Issue -
State: closed - Opened by yuzhou164 over 3 years ago
- 25 comments
Labels: good first issue
#1 - ImportError: cannot import name 'perceptual_loss'
Issue -
State: closed - Opened by AKclown over 3 years ago
- 4 comments