GitHub / platformio/platform-atmelavr issues and pull requests
#342 - platform atmel avr v5.1.0 failing to upload
Issue -
State: closed - Opened by jozles7777 3 months ago
- 8 comments
#341 - Upload to Arduino Nano (CH341 USB chip) fails in PlatformIO but works in Arduino IDE
Issue -
State: closed - Opened by nilton61 4 months ago
- 2 comments
#339 - board = ATmega328PB causes incorrect linkage
Issue -
State: closed - Opened by norventa 7 months ago
- 4 comments
#338 - Update toolchain-atmelavr version
Pull Request -
State: open - Opened by thirstyice 6 months ago
- 1 comment
#337 - Update main.S
Pull Request -
State: closed - Opened by Janidai 9 months ago
- 1 comment
#336 - Added attiny84_cw_pinmap board option
Pull Request -
State: open - Opened by nickyonge 10 months ago
- 1 comment
#335 - tool-simavr doesn't run on Ubuntu
Issue -
State: closed - Opened by adbancroft 10 months ago
- 1 comment
#334 - tool-simavr doesn't run on Ubuntu
Issue -
State: closed - Opened by adbancroft 11 months ago
- 1 comment
#333 - Warning about maximum data size should be an error instead
Issue -
State: open - Opened by robbieh 11 months ago
- 2 comments
#332 - Add support for wavgat support uno r3
Issue -
State: open - Opened by ABSOLUTEbeginnerr 11 months ago
#331 - Is there a possibility to detemine the selected board in sources
Issue -
State: closed - Opened by willie68 12 months ago
- 2 comments
#330 - Add a board config to 'Board Explorer' for standalone 328P PU (DIP28 IC on breadboard) with 8MHz and 1MHz internal clock
Issue -
State: closed - Opened by crunchysteve about 1 year ago
- 2 comments
Labels: board request
#329 - Adding ArduinoRS485-ArduinoModbus library support for Controllino MAXI and MEGA
Pull Request -
State: closed - Opened by pmmarquez about 1 year ago
- 1 comment
#328 - Uploading .pio\build\megaatmega2560\firmware.hex avrdude: ser_open(): can't open device "\\.\COM4": System can't find the specified file. avrdude: ser_drain(): read error: Not valid Controller.
Issue -
State: closed - Opened by ArturoVasquezG about 1 year ago
- 1 comment
#327 - please consider to add upload.mcu
Issue -
State: open - Opened by diniig over 1 year ago
- 2 comments
#326 - Custom board pull request. (STF Labs B107AA)
Issue -
State: open - Opened by akkoyun over 1 year ago
#325 - Create STFLabs_B107AA.json
Pull Request -
State: closed - Opened by akkoyun over 1 year ago
- 1 comment
#324 - toolchain-atmelavr source code and build scripts?
Issue -
State: open - Opened by mid-kid over 1 year ago
- 12 comments
#323 - Add support for ATX2
Issue -
State: open - Opened by Quadralific over 1 year ago
- 3 comments
Labels: board request
#322 - error: 'fabs' was not declared in this scope
Issue -
State: closed - Opened by dustinlacewell over 1 year ago
- 2 comments
#321 - Add support for the Urboot bootloader
Pull Request -
State: closed - Opened by MCUdude over 1 year ago
- 15 comments
#320 - Support for Urboot and Mighty/Mini/Mega/MajorCore v3.0.0
Issue -
State: closed - Opened by MCUdude almost 2 years ago
- 2 comments
#319 - excessive quotes fix
Pull Request -
State: closed - Opened by thijses almost 2 years ago
- 8 comments
#318 - Upload to attiny85 using optiboot (serial)
Issue -
State: open - Opened by alberiolima almost 2 years ago
#317 - PlatformIO passes the wrong -mmcu flag for the assembler (ATmega328PB)
Issue -
State: closed - Opened by PeterMaes almost 2 years ago
- 4 comments
#316 - Addding a custom board to your boards list (CRODUINO_ATMEGA328P_LoRA)
Issue -
State: open - Opened by erikthegamer1242 about 2 years ago
- 1 comment
Labels: board request
#315 - DOCS: Invalid Parameters.
Issue -
State: closed - Opened by satiowadahc about 2 years ago
- 1 comment
#314 - framework-arduino-avr package incredibly outdated
Issue -
State: closed - Opened by Yannik about 2 years ago
- 7 comments
#313 - avr-gdb in toolchain atmelavr is obsolete and depends on libncurses5
Issue -
State: open - Opened by jjchico about 2 years ago
- 2 comments
#312 - debugging with simavr: avr-gdb depends on libncurses.so.5 and libtinfo.so.5
Issue -
State: closed - Opened by michaels011235 about 2 years ago
- 1 comment
#311 - Add Urboot bootloader support for MicroCore
Pull Request -
State: closed - Opened by MCUdude about 2 years ago
- 3 comments
#310 - Update MCUdude cores the the latest version
Issue -
State: closed - Opened by MCUdude about 2 years ago
- 1 comment
#307 - relocation truncated to fit: R_AVR_13_PCREL against `no symbol'
Issue -
State: open - Opened by MrSurly over 2 years ago
#306 - Updated PIO, build now fails with "KeyError: 'tool-avrdude," but I'm not even using avrdude
Issue -
State: closed - Opened by MrSurly over 2 years ago
- 2 comments
#305 - [Feature Request]
Issue -
State: open - Opened by IcaroStumpf over 2 years ago
- 1 comment
#304 - add support for uno wifi dev edition
Pull Request -
State: closed - Opened by AlexisFetet over 2 years ago
- 2 comments
#303 - tool-micronucleus package (Digispark support) needs update to fix "flash erase error" -71, -32, etc. on Linux
Issue -
State: open - Opened by jlunder over 2 years ago
#302 - Update MCUdude cores (yet again, sorry)
Issue -
State: closed - Opened by MCUdude over 2 years ago
- 1 comment
#301 - Update all MCUdude Arduino cores to the latest version
Issue -
State: closed - Opened by MCUdude over 2 years ago
- 5 comments
#300 - Support for new AVR chips such as attiny804?
Issue -
State: open - Opened by rolfmobile99 over 2 years ago
- 1 comment
#299 - using c++ inside this platform
Issue -
State: open - Opened by MaxBayne over 2 years ago
- 1 comment
#298 - Windows ARM64 unable to install platformio/toolchain-atmelavr: " Could not find the package with [...] requirements for your system 'windows_arm64'"
Issue -
State: open - Opened by ggppjj over 2 years ago
- 1 comment
#297 - Setting fuses on Attiny fails due to spaces in path to avrdude
Issue -
State: closed - Opened by robmaxtech over 2 years ago
- 6 comments
#296 - Failed to launch GDB: .pioinit:13: Error in sourced command file: Remote replied unexpectedly to 'vMustReplyEmpty'
Issue -
State: open - Opened by VitaliyGaliy over 2 years ago
#295 - Support Move38 boards
Pull Request -
State: open - Opened by maxgerhardt over 2 years ago
#294 - Support Move38's Blinks
Issue -
State: open - Opened by TiiFuchs over 2 years ago
- 13 comments
#293 - avrdude.conf No such file or directory
Issue -
State: closed - Opened by Thijxx almost 3 years ago
- 5 comments
#292 - Missing python 2.7 installation on MacOS Monterey 12.6 when trying to start debug session
Issue -
State: open - Opened by Metamogul almost 3 years ago
- 9 comments
#291 - Adafruit Trinket 5V/8MHz upload issue
Issue -
State: open - Opened by guy-bartkus almost 3 years ago
#290 - Ou installer le dossier firmework arduinoavr/ Where to install firmwork folder arduinoavr
Issue -
State: closed - Opened by OmSenn almost 3 years ago
- 2 comments
#289 - Request support for board uStepper S based stepper driver and encoder
Issue -
State: open - Opened by smukkejohan almost 3 years ago
- 3 comments
#288 - platformio/toolchain-atmelavr remain at 1.70300.191015 despite latest release is 3.70300.220127
Issue -
State: closed - Opened by e-tinkers almost 3 years ago
- 1 comment
#287 - Add support for ATmegaxx5/xx50 and ATmegaxx9/xx90 chip families
Pull Request -
State: closed - Opened by MCUdude about 3 years ago
- 6 comments
#286 - Add support for ATmegaxx5/xx50 and ATmegaxx9/xx90 chipfamilies in fuses script
Pull Request -
State: closed - Opened by MCUdude about 3 years ago
- 3 comments
#285 - arduino mega2560 unable to program 16u2 (hoodloader2 installed)
Issue -
State: closed - Opened by MNS26 about 3 years ago
- 1 comment
#284 - Feature Request: Generate .eep without upload/flash
Issue -
State: closed - Opened by KenwoodFox about 3 years ago
- 2 comments
#283 - Platformio Arduino debug in CLion with simavr error "No module named gdb"
Issue -
State: open - Opened by rubencart about 3 years ago
- 2 comments
#282 - avrdude: error: no libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again.
Issue -
State: closed - Opened by thoduh about 3 years ago
#281 - Wildcards in upload_port not working
Issue -
State: closed - Opened by wackyfrog about 3 years ago
#280 - Supporting Z-Uno?
Issue -
State: open - Opened by nickolas1969 over 4 years ago
Labels: feature
#279 - "collect2.exe: error: ld returned 1 exit status"
Issue -
State: open - Opened by ItsGosho over 4 years ago
#278 - PlatformIO Debbuging with Arduino Uno Blink Template
Issue -
State: open - Opened by MantaRayDeeJay over 3 years ago
#277 - Upload to ATTiny167 fails
Issue -
State: open - Opened by hcccs over 3 years ago
- 2 comments
#276 - Support auto port detection for custom protocol
Pull Request -
State: open - Opened by asukiaaa over 3 years ago
#275 - avrdude lacking functionality
Issue -
State: open - Opened by uwezi over 3 years ago
- 1 comment
#274 - Add support for PICkit 4 in-circuit debugger
Issue -
State: open - Opened by kasiselvamk over 3 years ago
- 4 comments
Labels: feature
#273 - No light with FastLED, WS2812B and Arduino in PlatformIO (but with ArduinoIDE)
Issue -
State: open - Opened by blue66moon over 3 years ago
- 1 comment
#272 - Inherited workaround in avrdude.conf causes upload fail to ATmega8
Issue -
State: open - Opened by Cheesus13 over 3 years ago
- 1 comment
#271 - Hope support mEDBG
Issue -
State: open - Opened by wanggaoteng over 3 years ago
#270 - Simavr load failing on ATmega2560
Issue -
State: open - Opened by Con30 over 3 years ago
- 1 comment
#269 - KeyError: 'tool-avrdude' : fuses.py cannot find tool-avrdude
Issue -
State: closed - Opened by Madour over 3 years ago
- 3 comments
#268 - Add support for tinyAVR 2 Series MCU like attiny824
Issue -
State: closed - Opened by woodymgh over 3 years ago
- 4 comments
Labels: board request
#267 - Update urls to Controllino boards
Pull Request -
State: closed - Opened by stefan-muc over 3 years ago
- 1 comment
#266 - can't upload code to "leonardo"
Issue -
State: open - Opened by AMoktar almost 4 years ago
#265 - Remove attiny85 CLOCK_SOURCE from extra_flags
Pull Request -
State: closed - Opened by rholder almost 4 years ago
#264 - ATtiny85 runs at half speed due to bad clock source setting
Issue -
State: closed - Opened by Granjow almost 4 years ago
- 7 comments
#263 - Suppport for ATTINY1624
Issue -
State: closed - Opened by farfarfromhome almost 4 years ago
- 26 comments
Labels: board request
#262 - Add support for MHETtiny88 board
Pull Request -
State: open - Opened by lxxxxl almost 4 years ago
#261 - USB-CDC disabled on Atmega32U4
Issue -
State: open - Opened by NaokiS28 almost 4 years ago
- 1 comment
#260 - Support for ATmega328p Xplained mini
Issue -
State: open - Opened by QBos07 almost 4 years ago
Labels: board request
#259 - XMEM interface support
Issue -
State: open - Opened by r4wabr almost 4 years ago
Labels: enhancement
#258 - tool-simavr does not run on 32-bit Windows although advertised
Issue -
State: closed - Opened by maxgerhardt about 4 years ago
#257 - Sparkfun board definition for ATMega128RFA1 incorrect max ram and max size
Issue -
State: closed - Opened by bradanlane about 4 years ago
- 1 comment
#256 - avr-gdb depends on libncurses.so.5 and libtinfo.so.5
Issue -
State: closed - Opened by neildarlow about 4 years ago
- 3 comments
#255 - Change CPU frequency on attiny85 fails to compile in 3.3.0
Issue -
State: closed - Opened by 5e3 over 4 years ago
- 3 comments
Labels: help wanted
#254 - Unable to upload to Arduino Uno using USBasp
Issue -
State: open - Opened by manuelbl over 4 years ago
- 4 comments
#253 - Finding debug_port for avr-stub using HWIDs rather then hard-coding
Issue -
State: open - Opened by evilmav over 4 years ago
- 1 comment
Labels: feature
#252 - Please add support for FleetProbe/MicroBridge bootloader for Arduino Mega2560 boards
Issue -
State: open - Opened by cociweb over 4 years ago
#251 - Building project with MegaCore no longer works
Issue -
State: open - Opened by gudnimg over 4 years ago
- 25 comments
Labels: help wanted
#250 - *** [upload] Error 309 at digispark attiny85
Issue -
State: closed - Opened by Kamilake over 4 years ago
- 4 comments
Labels: help wanted
#249 - Race condition in pioupload.py prevents uploading to Atmega32u4-based boards
Issue -
State: open - Opened by MakerMatrix over 4 years ago
Labels: help wanted
#248 - Cannot build for Atmega32u4 (Leonardo). Bugs in 32u416m framework (USBCore)?
Issue -
State: closed - Opened by MakerMatrix over 4 years ago
- 2 comments
#247 - Outdated ATTinyCore with i2c error
Issue -
State: closed - Opened by dontsovcmc over 4 years ago
- 23 comments
Labels: help wanted
#238 - Add SVD files for ATMega chips
Pull Request -
State: closed - Opened by maxgerhardt over 4 years ago
- 3 comments
#196 - Uploading to any ATMega 32u4 based board is still broken
Issue -
State: open - Opened by Jkillelea about 5 years ago
- 14 comments
#195 - uploading with external programmer erases EEPROM
Issue -
State: closed - Opened by airiclenz about 5 years ago
- 2 comments
#174 - FR: `upload_port = usb`
Issue -
State: open - Opened by pfeerick over 5 years ago
- 1 comment
#173 - upload_protocol inconsistency in behaviour depending on board
Issue -
State: open - Opened by pfeerick over 5 years ago
- 1 comment
#169 - Support for Industrial Shields Boards Ardbox/M-duino
Issue -
State: open - Opened by Klasskampen almost 6 years ago
- 10 comments
Labels: board request
#165 - Is there any plan to create a default, built-in target `burn_bootloader`?
Issue -
State: closed - Opened by doronbehar almost 8 years ago
- 2 comments