percival-detector/percivalui issues and pull requests

#100 - Write the master data set when starting a new acquisition.

Pull Request - State: closed - Opened by ajgdls over 5 years ago

#99 - Added a reset call to the FP applications.

Pull Request - State: closed - Opened by ajgdls over 5 years ago

#98 - FP/FR control

Pull Request - State: closed - Opened by ajgdls over 5 years ago

#97 - Added parameter ADC RAMPS / Fskip_duration to chip_readout_settings. …

Pull Request - State: closed - Opened by lstebel almost 6 years ago - 2 comments

#96 - Buffer transfer

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#95 - Error message in the Odin-Cntrl terminal, nothing reported in the Web GUI

Issue - State: closed - Opened by ajgdls over 6 years ago - 4 comments

#94 - Updated GUI to display new detector status items (issue #67).

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#93 - status leds in odinControl .. where a 1 implies something bad red would be the better color

Issue - State: open - Opened by Wunderer over 6 years ago - 2 comments

#92 - access to "system armed" in grafana (and "system acquiring") in grafana

Issue - State: open - Opened by Wunderer over 6 years ago - 1 comment

#91 - request for detector panel

Issue - State: open - Opened by Wunderer over 6 years ago

#90 - how deep does "completed" verify the command actually made it to the proper bit of hardware?

Issue - State: open - Opened by Wunderer over 6 years ago

#89 - understanding & making safe - running powerUp scripts from commandline

Issue - State: open - Opened by Wunderer over 6 years ago - 1 comment

#88 - The update rate for status requests should be a configuration option

Issue - State: open - Opened by ajgdls over 6 years ago - 1 comment
Labels: enhancement

#87 - Add an indication of when values have changed to the GUI

Issue - State: open - Opened by ajgdls over 6 years ago - 2 comments
Labels: enhancement

#86 - Update the power up scripts to be Python scripts

Issue - State: open - Opened by ajgdls over 6 years ago
Labels: enhancement

#85 - Add units to the control settings GUI tab

Issue - State: open - Opened by ajgdls over 6 years ago - 1 comment
Labels: enhancement

#84 - Change command complete colour to green

Issue - State: open - Opened by ajgdls over 6 years ago - 1 comment
Labels: enhancement

#83 - Change command active colour to yellow.

Issue - State: closed - Opened by ajgdls over 6 years ago - 2 comments
Labels: enhancement

#82 - Ensure system settings are applied as integer values.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#81 - Increase the scanning step count demand by +1.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#80 - Ensure that full command parameters are logged to the trace log.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#79 - Ensure that full channel tear down and reconstruction is executed.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#78 - Updated numpy calls to produce integer values for scan points.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#77 - Added a refresh button to the status page. This resolves issue #46.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#76 - Added limit checking for calibration and configuration values.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#75 - Adding status monitoring to the detector.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#74 - Missed commands

Issue - State: open - Opened by lstebel over 6 years ago - 4 comments
Labels: bug, HIGH

#73 - Performance improvement

Issue - State: open - Opened by lstebel over 6 years ago - 2 comments

#72 - Issue fixes. Updates to txrx class for improved connection handling.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#71 - Always reload ini files before applying settings

Issue - State: closed - Opened by lstebel over 6 years ago - 2 comments
Labels: HIGH, Awaiting Test, GUI only...

#70 - SCAN PROBLEM OBSERVED

Issue - State: closed - Opened by lstebel over 6 years ago - 2 comments
Labels: invalid

#69 - Updated scripts and implements new functionality.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#68 - Scan setpoint, interpretation of steps...

Issue - State: open - Opened by lstebel over 6 years ago - 1 comment
Labels: bug, LOW

#67 - Status record

Issue - State: open - Opened by lstebel over 6 years ago - 12 comments
Labels: HIGH, Awaiting Test

#66 - Fast option for scan setpoint command

Issue - State: closed - Opened by lstebel over 6 years ago - 1 comment
Labels: MEDIUM, ELETTRA tested: PASS

#65 - Added script for downloading channel settings.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#64 - Remove display of component type from live viewer

Issue - State: closed - Opened by lstebel over 6 years ago
Labels: ELETTRA tested: PASS, GUI only..., LOW

#63 - Fixes to issues as reported by Luigi.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#62 - Script to edit system settings

Issue - State: closed - Opened by lstebel over 6 years ago - 1 comment
Labels: HIGH, ELETTRA tested: PASS

#61 - Possible improvement to percival-trace.log

Issue - State: closed - Opened by lstebel over 6 years ago - 1 comment
Labels: Awaiting Test, LOW

#60 - Problem with percival-hl-apply-setpoint

Issue - State: closed - Opened by lstebel over 6 years ago - 1 comment
Labels: ELETTRA tested: PASS

#59 - Influxdb clarification

Issue - State: open - Opened by ajgdls over 6 years ago
Labels: LOW

#58 - Spreadsheet parsing rules

Issue - State: open - Opened by ajgdls over 6 years ago
Labels: LOW

#57 - Provide script for "Download channel settings"

Issue - State: open - Opened by ajgdls over 6 years ago - 8 comments
Labels: HIGH, Awaiting Test

#56 - Update execute buttons to name the command they execute

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: MEDIUM, ELETTRA tested: PASS, GUI only...

#55 - Change the GUI title to be the same as selected tab

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: ELETTRA tested: PASS, GUI only..., LOW

#54 - Sort control group listbox

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: ELETTRA tested: PASS, GUI only...

#53 - Sort monitoring group listbox

Issue - State: closed - Opened by ajgdls over 6 years ago - 4 comments
Labels: ELETTRA tested: PASS, GUI only...

#52 - Sort setpoint listbox

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: HIGH, ELETTRA tested: PASS, GUI only...

#51 - Implement scanning safety action

Issue - State: closed - Opened by ajgdls over 6 years ago - 1 comment
Labels: HIGH, ELETTRA tested: PASS

#50 - Ensure float numbers are correctly converted to int when scanning setpoints

Issue - State: closed - Opened by ajgdls over 6 years ago - 1 comment
Labels: MEDIUM, Awaiting Test

#49 - Allow interruption/abort of a scan setpoint command

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: HIGH, ELETTRA tested: PASS

#48 - Scan setpoint script completes immediately

Issue - State: closed - Opened by ajgdls over 6 years ago - 3 comments
Labels: HIGH, ELETTRA tested: PASS

#47 - Scan setpoint scripts have faulty help pages

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: HIGH, ELETTRA tested: PASS

#46 - Add refresh button to monitoring GUI page

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: Awaiting Test, GUI only..., LOW

#45 - Scan setpoint failing when live monitoring is executing

Issue - State: closed - Opened by ajgdls over 6 years ago - 9 comments
Labels: HIGH, Awaiting Test

#44 - Stop conflicting commands from being executed

Issue - State: closed - Opened by ajgdls over 6 years ago - 1 comment
Labels: HIGH, ELETTRA tested: PASS

#43 - Setting invalid channel value raises exception but still sets the value.

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: HIGH, ELETTRA tested: PASS

#42 - Remove sensor related ini files from configuration section of percival ini file.

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: HIGH, ELETTRA tested: PASS

#41 - Potential bug allowing greater than permitted sensor calibration values.

Issue - State: open - Opened by ajgdls over 6 years ago - 1 comment
Labels: Awaiting Test, LOW

#40 - Potential bug allowing greater than permitted sensor configuration values.

Issue - State: open - Opened by ajgdls over 6 years ago - 1 comment
Labels: Awaiting Test, LOW

#39 - Bug allows greater than 6bit values set for sensor DACs.

Issue - State: open - Opened by ajgdls over 6 years ago
Labels: MEDIUM, Awaiting Test

#38 - Problem with Sensor Configuration command.

Issue - State: closed - Opened by ajgdls over 6 years ago - 1 comment
Labels: MEDIUM, ELETTRA tested: PASS

#37 - Problem with Sensor Calibration command.

Issue - State: closed - Opened by ajgdls over 6 years ago - 1 comment
Labels: MEDIUM, ELETTRA tested: PASS

#36 - Problem with Debug buffer command.

Issue - State: closed - Opened by ajgdls over 6 years ago - 2 comments
Labels: help wanted, HIGH, ELETTRA tested: PASS

#35 - Problem with Sensor DAC buffer command.

Issue - State: closed - Opened by ajgdls over 6 years ago - 2 comments
Labels: help wanted, HIGH, ELETTRA tested: PASS

#34 - Remove "Apply Setpoint" command from the Web GUI

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: ELETTRA tested: PASS, GUI only...

#33 - Remove window showing ini file content from the Web GUI.

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: ELETTRA tested: PASS, GUI only...

#32 - Remove script recording from the Web GUI.

Issue - State: closed - Opened by ajgdls over 6 years ago
Labels: ELETTRA tested: PASS, GUI only...

#31 - Implemented ROI apply buffer command. Fixed bug in system command script.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#30 - Updated buffer commands to ensure a no_op is a BufferCommand no_op

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#29 - Added a log of the last command sent.

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#28 - Updates from task list generated by Luigi (From F2F Nov 2017)

Pull Request - State: closed - Opened by ajgdls over 6 years ago

#27 - Changes for Alan

Pull Request - State: closed - Opened by lstebel almost 7 years ago

#26 - Minor improvements to command response and simulator.

Pull Request - State: closed - Opened by ajgdls almost 7 years ago

#25 - Updated to work against carrier board at DLS.

Pull Request - State: closed - Opened by ajgdls almost 7 years ago

#24 - Updates requested from Percival application testing.

Pull Request - State: closed - Opened by ajgdls almost 7 years ago

#23 - Ensure commands return success once they have completed.

Pull Request - State: closed - Opened by ajgdls about 7 years ago

#22 - Unicode updates for python 2.7

Pull Request - State: closed - Opened by ajgdls about 7 years ago

#21 - Improved logging, fixed bug in monitoring channels.

Pull Request - State: closed - Opened by ajgdls about 7 years ago

#20 - Updated parsing of true/false values for ini file download flags with…

Pull Request - State: closed - Opened by ajgdls about 7 years ago

#19 - Improved logging.

Pull Request - State: closed - Opened by ajgdls about 7 years ago - 1 comment

#18 - Added script for testing single address values.

Pull Request - State: closed - Opened by ajgdls about 7 years ago

#17 - Improved logging and updated GUI.

Pull Request - State: closed - Opened by ajgdls about 7 years ago

#16 - Implementation of sensor configuration. Additional command for downloading channel config.

Pull Request - State: closed - Opened by ajgdls about 7 years ago - 1 comment

#15 - Ini-file parsing development and improved unit tests.

Pull Request - State: closed - Opened by ajgdls about 7 years ago - 1 comment

#14 - Updated README file.

Pull Request - State: closed - Opened by ajgdls about 7 years ago

#13 - High level scripts, updated interface and ini file parsing.

Pull Request - State: closed - Opened by ajgdls over 7 years ago - 1 comment

#12 - Updates in preparation for F2F.

Pull Request - State: closed - Opened by ajgdls over 7 years ago

#11 - Influx dev

Pull Request - State: closed - Opened by ajgdls over 7 years ago - 2 comments

#10 - Gui dev

Pull Request - State: closed - Opened by ajgdls over 7 years ago

#9 - Split the intialisation of channels from the downloading of configuration

Pull Request - State: closed - Opened by ajgdls over 7 years ago - 1 comment

#8 - Firmware 08 05 2017 updates

Pull Request - State: closed - Opened by ajgdls over 7 years ago

#7 - Add simple control command

Issue - State: closed - Opened by ulrikpedersen over 7 years ago - 1 comment

#6 - Update .travis.yml

Pull Request - State: closed - Opened by ulrikpedersen over 7 years ago - 1 comment

#5 - Simulation as a class

Pull Request - State: closed - Opened by ulrikpedersen over 7 years ago - 1 comment

#4 - Comms exceptions

Pull Request - State: closed - Opened by ulrikpedersen over 7 years ago - 3 comments

#3 - Updates for FW ver. 2017.01.24

Pull Request - State: closed - Opened by ulrikpedersen over 7 years ago - 1 comment

#2 - detector.PercivalDetector to return command acknowledge message

Issue - State: closed - Opened by ulrikpedersen about 8 years ago - 1 comment
Labels: enhancement

#1 - Carrier board dev

Pull Request - State: closed - Opened by ajgdls about 8 years ago - 7 comments

GitHub / percival-detector/percivalui issues and pull requests