Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / opencomputeproject/Time-Appliance-Project issues and pull requests
#109 - Amm
Issue -
State: closed - Opened by bsbbase 3 months ago
#108 - R6 Placement Interferes with Y3 (Abracon AOCJYR) on OCXO Daughter Card
Issue -
State: open - Opened by skear 4 months ago
- 1 comment
#107 - OCXO Daughter Card V4 - Silkscreen Designator Mismatch for R8 and R33
Issue -
State: open - Opened by skear 4 months ago
- 1 comment
#106 - Could not find device ttySX
Issue -
State: open - Opened by SfCal 6 months ago
- 4 comments
#105 - Connecting 1PPS and 10MHz outputs with 50 Ohm termination to another TimeCard 1PPS and 10MHz inputs
Issue -
State: open - Opened by vlvassilev 6 months ago
#104 - Should the version numbers in the CoreList be the same as the version registers?
Issue -
State: open - Opened by JohnHay 10 months ago
- 3 comments
#103 - in CoreListFile.txt the high address of the AXI IIC CLOCK lines are wrong
Issue -
State: closed - Opened by JohnHay 10 months ago
- 7 comments
#102 - add sle* support for building the ptp_ocp driver
Pull Request -
State: closed - Opened by jacobsalmela 12 months ago
#101 - Deprecated function use in 'ptp_ocp' driver
Issue -
State: closed - Opened by HugoFolcher about 1 year ago
- 5 comments
#100 - fix shellcheck issues with time card driver script
Pull Request -
State: closed - Opened by jacobsalmela about 1 year ago
#99 - update dead link to ptp4u
Pull Request -
State: closed - Opened by jacobsalmela about 1 year ago
#98 - Request to make TimeCardOS.bit available
Issue -
State: closed - Opened by JohnHay about 1 year ago
- 1 comment
#97 - wrong UTC Offset to TAI during startup with NEO-M9N
Issue -
State: closed - Opened by JohnHay about 1 year ago
- 17 comments
#96 - Time Card PCB queries from PCBway regarding vias in pad.
Issue -
State: open - Opened by ghost about 1 year ago
- 2 comments
#95 - Loading driver cause system crash on version of Beta-V1
Issue -
State: closed - Opened by Satoshier over 1 year ago
- 12 comments
#94 - Early developer version of Tangle
Pull Request -
State: closed - Opened by lpradeepfb over 1 year ago
#93 - experimental timecard v9 resistors R2 and R3 have the wrong values
Issue -
State: closed - Opened by JohnHay over 1 year ago
- 1 comment
#92 - Production Timecard: mismatch between board and FPGA PCIe lane counts
Issue -
State: open - Opened by wisxxx over 1 year ago
- 1 comment
#91 - SMA TVS not connected to +3.3V
Issue -
State: open - Opened by wisxxx over 1 year ago
- 1 comment
#90 - Production Timecard: bad termination on FPGA JTAG with USB
Issue -
State: open - Opened by wisxxx over 1 year ago
- 2 comments
#89 - connector holes in Timecard I/O bracket aren't fully located
Issue -
State: closed - Opened by wisxxx over 1 year ago
- 1 comment
#88 - SA45 osc daughtercard does not bring out LOCK signal
Issue -
State: open - Opened by wisxxx over 1 year ago
- 1 comment
#87 - LOF (ver 0.1) mechanical drawing is incomplete
Issue -
State: open - Opened by wisxxx over 1 year ago
- 1 comment
#86 - Create CODE_OF_CONDUCT.md
Pull Request -
State: closed - Opened by ahmadexp over 1 year ago
- 1 comment
#84 - ptp_ocp: fix null pointer access in summary page
Pull Request -
State: closed - Opened by asratteshome over 1 year ago
- 2 comments
#83 - ptp_ocp: fix null pointer access in summary page
Pull Request -
State: closed - Opened by asratteshome over 1 year ago
- 2 comments
#82 - ptp_ocp: fix null pointer access in summary page
Pull Request -
State: closed - Opened by asratteshome over 1 year ago
- 1 comment
#81 - Open source FPGA build fails
Issue -
State: closed - Opened by wisxxx over 1 year ago
- 3 comments
#80 - Fail in creating open source FPGA binaries from scratch
Issue -
State: closed - Opened by wisxxx over 1 year ago
- 5 comments
#79 - locate SMB connector on RCB
Issue -
State: closed - Opened by wisxxx almost 2 years ago
- 1 comment
#78 - Prototype V7 schematic title block errors
Issue -
State: open - Opened by wisxxx almost 2 years ago
- 1 comment
#77 - LED driver enable pulled down
Issue -
State: closed - Opened by wisxxx almost 2 years ago
- 2 comments
#76 - Update README.md
Pull Request -
State: closed - Opened by Benargee almost 2 years ago
- 2 comments
#75 - seperate utc offset files
Issue -
State: closed - Opened by TuxCoder almost 2 years ago
- 2 comments
#74 - TimeCard starts with a random frequency offset on 10 MHz output
Issue -
State: open - Opened by MaciekMachni about 2 years ago
- 1 comment
#73 - ptp_ocp on RPi CM4 doesn't expose NMEA TTY and GNSS TTY
Issue -
State: open - Opened by MaciekMachni about 2 years ago
- 5 comments
#72 - tft: print new header information
Pull Request -
State: closed - Opened by vvfedorenko about 2 years ago
#71 - tft: Show header info of input file
Pull Request -
State: closed - Opened by vvfedorenko about 2 years ago
#70 - Time in GPZDA on the NMEA serial port is incorrect
Issue -
State: open - Opened by MaciekMachni about 2 years ago
- 5 comments
#69 - Is GNSS dependance the mistake? Should part of this include back to basics. Solar/moon calibration.
Issue -
State: open - Opened by oiaohm about 2 years ago
- 1 comment
#68 - TimeCard not visible on PCI bus after updating to FPGA rel 10
Issue -
State: closed - Opened by MaciekMachni about 2 years ago
- 1 comment
#67 - Add instruction for exposing remote GNSS module access
Pull Request -
State: closed - Opened by MaciekMachni about 2 years ago
#66 - Some questions about MAC and Address mapped
Issue -
State: open - Opened by Satoshier about 2 years ago
- 3 comments
#65 - About Driver
Issue -
State: closed - Opened by Satoshier about 2 years ago
#64 - Fix art config & temperature table offset
Pull Request -
State: closed - Opened by CharlesParent about 2 years ago
#63 - add support for mRO50 serial port direct access
Pull Request -
State: closed - Opened by vvfedorenko about 2 years ago
#62 - tft: add README.md to describe the tool
Pull Request -
State: closed - Opened by vvfedorenko over 2 years ago
- 1 comment
#61 - question How does this interface with pcie?
Issue -
State: open - Opened by Nosh-Ware over 2 years ago
- 2 comments
#60 - Add New ioctls to R/W extended EEPROM
Pull Request -
State: closed - Opened by CharlesParent over 2 years ago
- 3 comments
#59 - add tool to create firmware image header
Pull Request -
State: closed - Opened by vvfedorenko over 2 years ago
#58 - Mro50 Serial
Pull Request -
State: closed - Opened by CharlesParent over 2 years ago
- 2 comments
#57 - External atomic clock for laptops & such
Issue -
State: closed - Opened by greereer over 2 years ago
- 2 comments
#56 - ptp: ocp: Add firmware header checks
Pull Request -
State: closed - Opened by vvfedorenko over 2 years ago
#55 - UART
Issue -
State: open - Opened by Satoshier over 2 years ago
- 1 comment
#54 - ptp: ocp: add Celestica timecard PCI ids
Pull Request -
State: closed - Opened by vvfedorenko over 2 years ago
#53 - Some Applications I Guess
Issue -
State: open - Opened by Satoshier over 2 years ago
- 2 comments
#52 - ART Card: Configurable io
Pull Request -
State: closed - Opened by CharlesParent over 2 years ago
- 1 comment
#51 - Refresh Time-Card repository
Issue -
State: open - Opened by AlphaBetaPhi over 2 years ago
Labels: documentation, enhancement
#50 - Add mro50 to sysfs for ART card
Pull Request -
State: closed - Opened by CharlesParent over 2 years ago
- 1 comment
#49 - Delete ioctl saving coarse in mRO50 memory
Pull Request -
State: closed - Opened by CharlesParent over 2 years ago
- 1 comment
#48 - Add IOCTLs to R/W EEPROM
Pull Request -
State: closed - Opened by CharlesParent over 2 years ago
#47 - Orolia RW disciplining parameters
Pull Request -
State: closed - Opened by CharlesParent over 2 years ago
- 13 comments
#46 - FPGA pin assignments for production version
Issue -
State: closed - Opened by wisxxx over 2 years ago
- 3 comments
#45 - How to switch pps source?
Issue -
State: open - Opened by wlong-coxeve almost 3 years ago
- 1 comment
#44 - I found a mistake I think
Issue -
State: open - Opened by wlong-coxeve almost 3 years ago
- 4 comments
#43 - Why can't I get PPS
Issue -
State: closed - Opened by wlong-coxeve almost 3 years ago
- 1 comment
#42 - [Minor] Update Open-Time-Server's README
Pull Request -
State: closed - Opened by bence98 almost 3 years ago
#41 - Why didn't you integrate at least one Ethernet MAC?
Issue -
State: closed - Opened by aholzinger almost 3 years ago
- 3 comments
#40 - Molex plug missing from BOM?
Issue -
State: closed - Opened by wbl almost 3 years ago
- 2 comments
#39 - FPGA Design Overview Clarifications
Issue -
State: closed - Opened by wisxxx almost 3 years ago
- 3 comments
#38 - Updated FPGA
Issue -
State: closed - Opened by wisxxx almost 3 years ago
- 2 comments
#37 - PCIe clock capacitors
Issue -
State: closed - Opened by wisxxx almost 3 years ago
- 1 comment
#36 - MAC_USB_PWR
Issue -
State: closed - Opened by wisxxx almost 3 years ago
- 5 comments
#35 - Is DRAM used on the FPGA module?
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 2 comments
#34 - EEPROM write protect input driven by +1.5V signal
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 6 comments
Labels: bug, documentation
#33 - Why +3.3V regulator when +3.3V available on PCIe connector?
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 3 comments
#32 - Accelerometer and Pressure Sensors
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 2 comments
#31 - What's the toolchain for the schematics?
Issue -
State: closed - Opened by wbl about 3 years ago
- 1 comment
#30 - Delete phasemeter from ART card
Pull Request -
State: closed - Opened by CharlesParent about 3 years ago
#29 - Fixed horrible typos
Pull Request -
State: closed - Opened by niansa about 3 years ago
#27 - Corrected spelling errors in readme
Pull Request -
State: closed - Opened by ChrisIdema about 3 years ago
- 1 comment
#26 - Update ART card devices
Pull Request -
State: closed - Opened by CharlesParent about 3 years ago
#25 - Add support for Debian systems for the Time Card.
Pull Request -
State: closed - Opened by geerlingguy about 3 years ago
#24 - PCIe Bracket V3 dimensions
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 6 comments
#23 - Driver compilation on Raspberry Pi (CM4) / Pi OS
Issue -
State: closed - Opened by geerlingguy about 3 years ago
- 1 comment
#22 - beta-v1 schematics issues
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 3 comments
#21 - Power to pressure sensor and IMU
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 1 comment
#20 - Not enough info for ordering
Issue -
State: closed - Opened by ErQrYfkrju about 3 years ago
- 2 comments
#19 - Fab documentation
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 3 comments
#18 - Unknown connector
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 3 comments
#17 - FPGA IP Licensing
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 10 comments
Labels: in investigation
#16 - Is this absolute hard limit->PCIe x1 (18 pins) generation 3.0 or above
Issue -
State: open - Opened by oiaohm about 3 years ago
- 4 comments
#15 - Create LICENSE
Pull Request -
State: closed - Opened by rajeevsharma1 about 3 years ago
#14 - Why DFLZ39 Zener diodes for +12V input isolation?
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 2 comments
#13 - Why different USB connectors (mini and micro)?
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 2 comments
#12 - BNO055 and environmental sensing
Issue -
State: closed - Opened by JoshSat about 3 years ago
- 1 comment
#11 - What are the IMU (BNO080) and barometric pressure sensor (BMP388) used for?
Issue -
State: closed - Opened by Nufflee about 3 years ago
- 4 comments
#10 - BOM and schematic errata
Issue -
State: closed - Opened by wisxxx about 3 years ago
- 4 comments
#7 - Orolia art card support
Pull Request -
State: closed - Opened by CharlesParent about 3 years ago
#5 - Add Orolia's ART card support
Pull Request -
State: closed - Opened by CharlesParent over 3 years ago
- 1 comment