openbmc/phosphor-host-ipmid issues and pull requests

#207 - ipmitool lan print command returns wrong IP Adress

Issue - State: open - Opened by chnguyen-ampere 2 months ago - 10 comments

#206 - No threshold check when cache is enabled

Issue - State: open - Opened by jackcheng321123 4 months ago

#205 - UT fails when switching lg2

Issue - State: closed - Opened by lxwinspur 4 months ago - 2 comments

#204 - The Test Password with the wrong length is throwing the error code 0xc7 instead of 0x81

Issue - State: open - Opened by Mani-v 7 months ago - 2 comments

#203 - static sensor provide only roundoff value from yaml configuration.

Issue - State: open - Opened by Logananth-s 7 months ago - 1 comment

#202 - Using reserved 111b value indicate state of power policy none

Pull Request - State: closed - Opened by liuzhongzhi 9 months ago - 2 comments

#201 - Error in reading IPMI user data file - User count issues

Issue - State: open - Opened by Nichanghao-xiaohao 9 months ago

#200 - After Setting BootSourceOverrideTarget as Diags in Redfish, in IPMI chassis Bootparam get 5 command Boot Device Selector needs to show as "Force Boot from Diagnostic Partition".

Issue - State: open - Opened by KothaiSrini 10 months ago - 3 comments

#199 - Unable to execute `lan set 1 access on/off` IPMI command

Issue - State: open - Opened by ckstyle001 10 months ago

#198 - [Bug]ipmitool sensor cannot present correct values

Issue - State: open - Opened by justin0309 about 1 year ago

#197 - System Event Log (SEL) Improperly Tied to Dynamic Sensors Switch

Issue - State: open - Opened by iwoloschin about 1 year ago

#196 - ipmitool fru and sel list

Issue - State: closed - Opened by Govindharajen about 1 year ago

#195 - phosphor-host-ipmid fails when pulled in as a depenency in CI

Issue - State: closed - Opened by geissonator about 1 year ago - 2 comments

#194 - initSELCache fails during booting

Issue - State: open - Opened by trindenau over 1 year ago - 2 comments

#193 - ipmitool fru edit cmd returning sucess while having an exception

Issue - State: closed - Opened by cvam0000 over 1 year ago - 7 comments

#192 - IPMI and Redfish Showing different values of the same sensor at the same time.

Issue - State: closed - Opened by cvam0000 over 1 year ago - 8 comments

#191 - IPMI: IPL: phosphor-ipmi-host.service SEGV core dumps during killall or stop ipmid

Issue - State: open - Opened by lxwinspur over 1 year ago - 1 comment

#190 - Cannot load the provider of dynamic sensors

Issue - State: open - Opened by jannyau over 1 year ago - 8 comments

#189 - dbus-sdr：can not build two sensors with same path in sensorTree

Issue - State: open - Opened by LinflAsh over 1 year ago

#188 - phosphor-ipmi-host.service intermittently failing in openbmc CI

Issue - State: open - Opened by geissonator almost 2 years ago - 2 comments

#187 - Cannot build if enable dynamic sensor

Issue - State: closed - Opened by Yung-sheng about 2 years ago

#186 - Extra SDR Entries With Dynamic Sensors

Issue - State: open - Opened by iwoloschin about 2 years ago - 2 comments

#185 - Very intermittelty getting "Corrupted nv channel access file"

Issue - State: open - Opened by geissonator about 2 years ago - 3 comments

#184 - Config is broken [ Need to have a good documentations ]

Issue - State: open - Opened by cvam0000 over 2 years ago

#183 - Fix for Boost-1.79:

Pull Request - State: closed - Opened by jzmaddock over 2 years ago - 1 comment

#182 - Remove inband IPMI support

Issue - State: open - Opened by sbteeks over 2 years ago - 1 comment

#181 - Dynamic Sensors can't return full sensor list in some scenarios

Issue - State: closed - Opened by Awesomex005 almost 3 years ago

#180 - ipmi PAM session authentication reported as dropbear service

Issue - State: open - Opened by jk-ozlabs about 3 years ago - 1 comment

#179 - IPMITOOL Fails to Give Sensor Values both in Outband and IN-band

Issue - State: open - Opened by manojdesd about 3 years ago

#178 - IPMI get device ID returns wrong revision leading to ipmitool mc info displaying wrong firmware revision

Issue - State: open - Opened by marthauk about 3 years ago - 2 comments

#177 - Sensor SELs showing as Undetermined system hardware failure in OpenBMC 2.7.0

Issue - State: open - Opened by marthauk over 3 years ago

#176 - Can not request write FRU with FRU's ID is 0

Issue - State: open - Opened by thangtran-ampere over 3 years ago

#175 - Dynamic Sensors Missing Symbols Breaks IPMI

Issue - State: closed - Opened by iwoloschin over 3 years ago - 3 comments

#174 - IPMI sol activate command is failing

Issue - State: open - Opened by rahulmah over 3 years ago - 4 comments

#173 - Unable to enable disable SOL via IPMI

Issue - State: open - Opened by rahulmah over 3 years ago - 1 comment

#172 - IPMI does not display power sensor value correctly

Issue - State: open - Opened by rahulmah over 3 years ago - 3 comments

#171 - Unable to activate IPMI payload

Issue - State: open - Opened by rahulmah over 3 years ago

#170 - error: empty parentheses were disambiguated as a function declaration

Issue - State: open - Opened by geissonator over 3 years ago

#169 - Rebase 0415

Pull Request - State: closed - Opened by dvcyw over 3 years ago

#168 - Unable to set IPMI SOL parameter

Issue - State: open - Opened by rahulmah over 3 years ago

#167 - ipmitool dcmi power reading do not work

Issue - State: open - Opened by hieuhuynh-ampere over 3 years ago - 1 comment

#166 - Unable to execute `lan set 1 access off` IPMI command on the AMD EthanolX board

Issue - State: open - Opened by Kostr over 3 years ago

#165 - Export host BIOS information to D-bus

Issue - State: open - Opened by Kostr almost 4 years ago

#164 - Wrong property key used for building chassis info area

Issue - State: open - Opened by pswarfound about 4 years ago - 1 comment

#163 - Presubmits for repos dependent on phosphor-host-ipmid failing intermittently

Issue - State: closed - Opened by brandonkimbk about 4 years ago - 8 comments

#162 - How to modify the threshold of a sensor

Issue - State: closed - Opened by kingzmm about 4 years ago - 1 comment

#161 - Event Data 2 type sensors return invalid data

Issue - State: open - Opened by jk-ozlabs over 4 years ago - 2 comments

#160 - IPMI function `ipmiGetSystemRestartCause` is picking wrong dbus path.

Issue - State: open - Opened by sharady over 4 years ago

#159 - Add SEL Entry command support

Issue - State: open - Opened by Andywjzhang over 4 years ago

#158 - Hard power off sends incorrect state transition request

Issue - State: open - Opened by jk-ozlabs over 4 years ago - 9 comments

#157 - Meson Build

Issue - State: open - Opened by ruiz-go over 4 years ago - 1 comment

#156 - Dev samuel add watchdog sensor type

Pull Request - State: closed - Opened by jiangchyishian over 4 years ago

#155 - Storagehandler.cpp, meet Error : set SEL Time Command failed!!

Issue - State: open - Opened by zzhuang-cancon over 4 years ago

#154 - bootstrap.sh prompts: Run "./configure ${CONFIGURE_FLAGS} && make" even if it fails.

Issue - State: open - Opened by drewmacrae over 4 years ago

#153 - bitbake build time: phosphor-ipmi-host-1.0+gitAUTOINC+6467ed247f-r1 do_compile

Issue - State: open - Opened by geissonator over 4 years ago

#152 - Dev errlog 0401

Pull Request - State: closed - Opened by georgehung1210 over 4 years ago

#151 - Unable to configure network over lanplus interface

Issue - State: open - Opened by nest1ing over 4 years ago - 7 comments

#150 - S8I : Fix get recoverable property for sensor threshold

Pull Request - State: closed - Opened by dukedu83 over 4 years ago

#149 - Password of length 16 chars or more is not getting set for IPMI user frequently

Issue - State: open - Opened by adathatri over 4 years ago - 7 comments

#148 - Dev scron fix sel add

Pull Request - State: closed - Opened by Scron-Chang over 4 years ago

#147 - return true state of message queue in get message flags command

Issue - State: open - Opened by geissonator almost 5 years ago - 1 comment

#146 - all sensors which readingType is assertion are disable

Issue - State: open - Opened by ypinky almost 5 years ago - 1 comment

#145 - A potential license conflict issue

Issue - State: open - Opened by yongli3 almost 5 years ago

#144 - Dev tony signed sensor value

Pull Request - State: closed - Opened by tonylee79 about 5 years ago

#143 - ipmitool raw 0x060 0x2f dons't support? How to add this command?

Issue - State: open - Opened by ChaoyangZhang about 5 years ago

#142 - Compilation fails if there are no additional whitelists in ${STAGING_DATADIR_NATIVE}/phosphor-ipmi-host/*.conf

Issue - State: open - Opened by pstrinkle about 5 years ago

#141 - Platform Event message implementation to be configured by compilation flags

Issue - State: open - Opened by tomjoseph83 about 5 years ago

#140 - Capabilities spelling needs to be corrected in dcmi discover output

Issue - State: closed - Opened by rahulmah over 5 years ago - 2 comments

#139 - Unable to set lan access via ipmitool

Issue - State: open - Opened by rahulmah over 5 years ago - 11 comments

#138 - ipmid should have a way to detect and remove sensors from IPMI SDR if they could be "not present"

Issue - State: open - Opened by kunyi731 over 5 years ago

#137 - IPMId should dynamically compute sensor reading coefficients (M, b, R, scale...)

Issue - State: open - Opened by kunyi731 over 5 years ago - 1 comment

#136 - MC Reset Warm not supported in IPMI

Issue - State: open - Opened by geissonator over 5 years ago - 3 comments

#135 - Resolve conflict

Pull Request - State: closed - Opened by georgehung1210 over 5 years ago

#134 - CI: Intermittent failure in phosphor-ipmi-host.service

Issue - State: closed - Opened by geissonator over 5 years ago - 8 comments

#133 - Host inventory errors

Issue - State: open - Opened by gkeishin over 5 years ago - 3 comments

#132 - IPMI out-of-band "user list/summary" command fails without channel number

Issue - State: closed - Opened by rahulmah over 5 years ago - 5 comments

#131 - Request to get power limit information failed

Issue - State: closed - Opened by gkeishin over 5 years ago - 7 comments

#130 - ipmid ERROR opening and JSON file not found

Issue - State: open - Opened by gkeishin over 5 years ago - 3 comments

#129 - Commands returning c1 completion code

Issue - State: open - Opened by ghost over 5 years ago - 1 comment

#128 - Disabled IPMI root user is able to run IPMI command

Issue - State: closed - Opened by rahulmah over 5 years ago - 4 comments

#127 - Unable to enable IPMI user with recent build

Issue - State: closed - Opened by rahulmah over 5 years ago - 4 comments

#126 - Extra Bytes in response data for chassis Identify command

Issue - State: open - Opened by cjia4 over 5 years ago - 1 comment

#125 - Able to run IPMI command with user with IPMI messaging disabled and no access privilege

Issue - State: closed - Opened by rahulmah almost 6 years ago - 7 comments

#124 - User list command without channel number is failing with inband IPMI

Issue - State: closed - Opened by rahulmah almost 6 years ago - 2 comments

#123 - IPMI tool allowing to set different privilege for root user

Issue - State: closed - Opened by rahulmah almost 6 years ago - 2 comments

#122 - front_panel_button_cap_status is not supported in ipmi_get_chassis_status command

Issue - State: open - Opened by kuiyingw almost 6 years ago

#121 - Sensor capabilites aren't reported in full sensor records

Issue - State: open - Opened by AlexanderAmelkin almost 6 years ago

#120 - how to support user manage

Issue - State: open - Opened by huangchengjiu almost 6 years ago

#119 - Witherspoon: phosphor-ipmi-host.service: Failed with result 'core-dump'.

Issue - State: open - Opened by gkeishin about 6 years ago

#118 - Witherspoon : org.freedesktop.DBus.Error.UnknownObject: Unknown object

Issue - State: open - Opened by gkeishin about 6 years ago
Labels: bug

#117 - Witherspoon : IPMID Inventory update error

Issue - State: open - Opened by gkeishin about 6 years ago
Labels: bug

#116 - Boot override doesn't appear on host

Issue - State: open - Opened by sammj about 6 years ago - 3 comments

#115 - legacy (and unsupported) org.openbmc.settings.Host still references in this repoistory

Issue - State: closed - Opened by geissonator about 6 years ago

#114 - selected output from the system information could change between readings making the index read method invalid

Issue - State: open - Opened by pstrinkle about 6 years ago

#113 - phosphor-host-ipmid does not build in SDK - sensor-gen.cpp:147:1: error: could not convert

Issue - State: open - Opened by geissonator about 6 years ago

#112 - The Firmware Revision from 'ipmitool mc info' by OOB may be '0.00'

Issue - State: open - Opened by henbin over 6 years ago

#111 - Watchdog requests are not retried if the cache is stale

Issue - State: closed - Opened by wak-google over 6 years ago - 1 comment

#109 - Investigate move to sdbusplus

Issue - State: open - Opened by nasamuffin over 7 years ago

#103 - Add support for multiple interfaces in sensorhandler

Issue - State: closed - Opened by nasamuffin over 7 years ago

#100 - Configure should fail when mapper is missing

Issue - State: closed - Opened by msbarth about 8 years ago

GitHub / openbmc/phosphor-host-ipmid issues and pull requests