Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / looooo/freecad.gears issues and pull requests
#164 - module 'scipy' has no attribute 'optimize'
Issue -
State: open - Opened by aladdain 2 months ago
#163 - [FeatureRequest] Automated planetary gear system generation
Issue -
State: open - Opened by VinnyCordeiro 3 months ago
#162 - Generated strange worm gear when the height of the gear is greater than 450mm (425mm)
Issue -
State: closed - Opened by StartEndUser 3 months ago
- 1 comment
#160 - Update icons to be in line with FreeCAD
Pull Request -
State: closed - Opened by maxwxyz 3 months ago
- 2 comments
#159 - Add error handling at `GearConnector`
Pull Request -
State: closed - Opened by hasecilu 3 months ago
#158 - Fix missing comma
Pull Request -
State: closed - Opened by hasecilu 3 months ago
#157 - Selecting Involute Gear in V.22 Development Branch Causes Immediate Crash of Freecad
Issue -
State: open - Opened by BrianAtDocumentedDesigns 4 months ago
- 1 comment
#156 - Ondsel Freecad crash with freecad.gears
Issue -
State: open - Opened by turbubestia 4 months ago
- 1 comment
#155 - The workbench does not open in the Flatpak version of FreeCad. Solution provided.
Issue -
State: open - Opened by TheOldMiguel 4 months ago
- 1 comment
#154 - Typo in timinggear_t.py
Issue -
State: closed - Opened by Roy-043 4 months ago
- 1 comment
#153 - Rename GUI commands to follow FreeCAD format
Pull Request -
State: open - Opened by hasecilu 4 months ago
- 5 comments
#152 - [Discussion] Implementing GUI translation on Crowdin.
Issue -
State: open - Opened by kaktusus 5 months ago
- 2 comments
#151 - `What's this?` command opens wrong wiki article url
Issue -
State: open - Opened by hasecilu 5 months ago
- 3 comments
#150 - Make license match SPDX ID
Pull Request -
State: closed - Opened by chennes 5 months ago
#149 - Add translation support
Pull Request -
State: closed - Opened by hasecilu 5 months ago
- 1 comment
#146 - Error when saving file with gear
Issue -
State: open - Opened by viktak 5 months ago
- 14 comments
#145 - Using thornton cutters and measurments
Issue -
State: open - Opened by alexkoel1958 5 months ago
- 2 comments
#144 - Massive issues with Involute Gears
Issue -
State: open - Opened by azalanono 6 months ago
- 1 comment
#143 - Refactoring
Pull Request -
State: closed - Opened by looooo 6 months ago
#141 - [Gears] Handle both up-to-date FreeCAD versions with multiple different Python versions...
Pull Request -
State: closed - Opened by Syres916 6 months ago
#140 - Failed to install freecad.gears
Issue -
State: closed - Opened by Shalmeneser 6 months ago
- 2 comments
#139 - No gear_parameters after creating a gear
Issue -
State: closed - Opened by aerobaticant 6 months ago
- 5 comments
#138 - [Gears] Fix AddonManager not updating to...
Pull Request -
State: closed - Opened by Syres916 7 months ago
#137 - [Gears] Remove use of deepcopy due to the change in FreeCAD core code
Pull Request -
State: closed - Opened by Syres916 7 months ago
- 2 comments
#136 - Avoid self-crossing of involute teeth
Pull Request -
State: open - Opened by PeterReid 9 months ago
- 1 comment
#135 - Addon Manager uses outdated develop branch
Issue -
State: closed - Opened by Schildkroet 9 months ago
#134 - Update features.py to support HTD Timing Gear Profiles
Pull Request -
State: closed - Opened by BearTM 9 months ago
- 2 comments
#133 - When you make a double helix, the full value does not come
Issue -
State: open - Opened by gebze52 10 months ago
- 3 comments
#132 - Remove LGTM badges from README.md
Pull Request -
State: closed - Opened by luzpaz 10 months ago
#131 - Enveloping worm gear
Issue -
State: open - Opened by Gypaets 10 months ago
- 5 comments
#130 - Deleting a gear connector spills some errors in the log
Issue -
State: open - Opened by mbait about 1 year ago
- 1 comment
#129 - Proper integration of connected gears into the project tree
Issue -
State: open - Opened by mbait about 1 year ago
- 1 comment
#128 - Construct Sprocket wheels by distance?
Issue -
State: open - Opened by simonbuehler about 1 year ago
#127 - Crash with older files without newer properties
Issue -
State: open - Opened by mhindi2 about 1 year ago
- 2 comments
#126 - Fixed issue loading old document without traverse_module in gear XML
Pull Request -
State: closed - Opened by scottmudge over 1 year ago
- 1 comment
#125 - worm wheel
Issue -
State: open - Opened by htrabbit over 1 year ago
#124 - Unable to install FCGear in FreeCAD v0.19
Issue -
State: open - Opened by amanbop over 1 year ago
#123 - Cannot calculate pitch angle in bevelgear
Issue -
State: open - Opened by lesebas over 1 year ago
#122 - combine two gears does not work with double helix gears
Issue -
State: open - Opened by kes31 over 1 year ago
#121 - Create a helical involute gear on an existing shaft
Issue -
State: open - Opened by maxwxyz over 1 year ago
- 3 comments
#120 - Calculating root of bevel gear with clearance > 0
Issue -
State: open - Opened by pedro-pedrosa over 1 year ago
- 4 comments
#119 - Eccentrically Cycloidal Gears
Issue -
State: open - Opened by rainell over 1 year ago
#118 - Disable regen?
Issue -
State: open - Opened by FlailAway over 1 year ago
#117 - function takes exactly 2 arguments (1 given)
Issue -
State: open - Opened by m12lrpv over 1 year ago
- 1 comment
#116 - Problems with spreadsheet
Issue -
State: open - Opened by uli6666 over 1 year ago
- 1 comment
#115 - [FeatureRequest] Trapezoidal rack based on module parameter
Issue -
State: open - Opened by acolomitchi over 1 year ago
#114 - Parameter group names inconsistent
Issue -
State: open - Opened by Roy-043 almost 2 years ago
#113 - Wrong Transverse_pitch calculation on involute rack
Issue -
State: closed - Opened by schwantz69 almost 2 years ago
- 10 comments
#112 - Added HTD8 timing gear
Pull Request -
State: closed - Opened by vedderb almost 2 years ago
#111 - Develop
Pull Request -
State: closed - Opened by looooo almost 2 years ago
#110 - Still can't use gears...
Issue -
State: open - Opened by DeepSeaOrca42 almost 2 years ago
#109 - involuterack incorrectly alters transverse pitch when beta not zero
Issue -
State: closed - Opened by gcgcgcgc about 2 years ago
- 4 comments
#108 - Gears export to SVG in triplicate
Issue -
State: open - Opened by skintigh about 2 years ago
- 2 comments
#107 - Cycloidal Gears need inside holes as well.
Issue -
State: open - Opened by iplayfast about 2 years ago
#106 - Feature Request: Gears Scriptability
Issue -
State: open - Opened by onekk about 2 years ago
#105 - Kerf
Issue -
State: closed - Opened by skintigh about 2 years ago
- 6 comments
#104 - Workbench Improvements
Issue -
State: open - Opened by KellyJones2777 over 2 years ago
#103 - fcgear installation fails on FreeCAD 0.20 on Mac
Issue -
State: closed - Opened by ryanthara over 2 years ago
- 3 comments
#102 - Create package.xml
Pull Request -
State: closed - Opened by chennes over 2 years ago
- 1 comment
#101 - Add extra metadata to `package.xml`
Pull Request -
State: closed - Opened by luzpaz over 2 years ago
#100 - Bevel Gears - Incomplete tooth forms @ Pitch Angles > 50°
Issue -
State: open - Opened by rdtravis over 2 years ago
- 1 comment
#99 - Update to new FreeCAD AddonManager metadata schema
Issue -
State: open - Opened by luzpaz over 2 years ago
- 9 comments
#98 - Helical internal involute gear
Issue -
State: closed - Opened by ofpkubi over 2 years ago
- 8 comments
#97 - Create profiles as Part::Part2DObjectPython for better interop with existing tools
Issue -
State: open - Opened by jbaehr over 2 years ago
#96 - Calculate pitch diameter and angular backlash via expressions
Pull Request -
State: closed - Opened by jbaehr over 2 years ago
#95 - Fix: Interpret the backlash as "Circumferential Backlash"
Pull Request -
State: closed - Opened by jbaehr over 2 years ago
#94 - Use expression as `inner_diameter` for cycloid gear
Pull Request -
State: closed - Opened by jbaehr over 2 years ago
#93 - Fix head and clearance for the cycloid gear
Pull Request -
State: closed - Opened by jbaehr over 2 years ago
- 2 comments
#92 - Backport head parameter for cycloid gear
Pull Request -
State: closed - Opened by jbaehr over 2 years ago
#91 - Fix source comment typos
Pull Request -
State: closed - Opened by luzpaz over 2 years ago
- 1 comment
#90 - Internal Involute Gear - Helical Mode errors
Issue -
State: open - Opened by scottmudge over 2 years ago
- 16 comments
#89 - Add cycloid rack icon in same style as existing cycloid gear
Pull Request -
State: closed - Opened by scottmudge over 2 years ago
- 1 comment
#88 - Bugfix for icon issues
Pull Request -
State: closed - Opened by scottmudge over 2 years ago
- 1 comment
#87 - Development branch -- Saving and reloading project yields "object has no attribute `icon_fn`
Issue -
State: closed - Opened by scottmudge over 2 years ago
- 4 comments
#86 - Make clearance apply to teeth shape?
Issue -
State: closed - Opened by scottmudge over 2 years ago
- 3 comments
#85 - Fix #84 and #63 by float conversion int(float( version_string )) >= 18
Pull Request -
State: open - Opened by uDude over 2 years ago
- 5 comments
#84 - aarch64 bug in version check.
Issue -
State: open - Opened by uDude over 2 years ago
- 1 comment
#83 - Allow undoing gear creation
Pull Request -
State: closed - Opened by jbaehr over 2 years ago
- 2 comments
#82 - [Feature Request] Planetary outer ring gear generation
Issue -
State: closed - Opened by BadRAM over 2 years ago
- 2 comments
#81 - Part Design integration
Issue -
State: open - Opened by mwganson over 2 years ago
- 11 comments
#80 - not files
Issue -
State: closed - Opened by WertX91 almost 3 years ago
- 1 comment
#79 - Asymmetric Involute Gear Profile?
Issue -
State: open - Opened by charmquark1984 almost 3 years ago
- 2 comments
#78 - Can this make a planetary ring gear?
Issue -
State: closed - Opened by daveseff almost 3 years ago
- 3 comments
#77 - Add an internal involute gear
Pull Request -
State: closed - Opened by jbaehr almost 3 years ago
- 10 comments
#76 - problem adding holes to a gear via a sketcher
Issue -
State: closed - Opened by brown-richard almost 3 years ago
- 4 comments
#75 - Part::AttachExtension not present if gear is created inside a body, unable to move them
Issue -
State: closed - Opened by YosypC almost 3 years ago
- 1 comment
#74 - Improve support for gears in PartDesign bodies
Pull Request -
State: closed - Opened by jbaehr almost 3 years ago
- 4 comments
#73 - Fix source comment typo
Pull Request -
State: closed - Opened by luzpaz almost 3 years ago
- 1 comment
#72 - Make Gears Attachable
Pull Request -
State: closed - Opened by jbaehr about 3 years ago
- 6 comments
#71 - Bevel gear issues
Issue -
State: closed - Opened by dperry20 about 3 years ago
- 5 comments
#70 - construction tools
Issue -
State: open - Opened by looooo about 3 years ago
Labels: megagrant
#69 - Expose outside and root diameter to freecad
Pull Request -
State: closed - Opened by jbaehr about 3 years ago
- 2 comments
#68 - better documentation
Issue -
State: open - Opened by looooo about 3 years ago
Labels: megagrant
#67 - Cycloidal disk should be contracted.
Issue -
State: open - Opened by iplayfast about 3 years ago
- 2 comments
#66 - Please add more timing gear profiles to FCGear - Most important T5 is missing
Issue -
State: open - Opened by azalanono over 3 years ago
- 32 comments
Labels: megagrant
#65 - Errors/Corrections of the Undercut Option
Issue -
State: closed - Opened by JohnThinger over 3 years ago
- 2 comments
#64 - Translate Gears WB
Issue -
State: closed - Opened by luzpaz over 3 years ago
- 1 comment
Labels: megagrant
#63 - Unable to install on FreeCad 0.18
Issue -
State: open - Opened by jf1452 over 3 years ago
- 8 comments
#62 - rotatateZ is not working as expected
Issue -
State: closed - Opened by bevinhex over 3 years ago
- 1 comment
#61 - allow center hole radius to be zero, and bugfix for previous patch
Pull Request -
State: closed - Opened by bevinhex over 3 years ago