Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / gpiozero/gpiozero issues and pull requests
#1172 - RuntimeError: Cannot determine SOC peripheral base address
Issue -
State: open - Opened by dshaurya 8 days ago
- 4 comments
#1171 - Sharing the gift of time saved.
Pull Request -
State: open - Opened by mjm41 9 days ago
#1170 - Construct LEDCollection with initial value 0 not None inside LEDCharDisplay init
Pull Request -
State: open - Opened by bennuttall 27 days ago
- 4 comments
#1169 - Failure to construct LEDCharDisplay
Issue -
State: open - Opened by etam 28 days ago
- 3 comments
#1168 - Multiple problems with LEDMultiCharDisplay
Issue -
State: open - Opened by etam 28 days ago
#1167 - pin labelling does not tolerate leading zero in string port naming
Issue -
State: open - Opened by polymerchm about 1 month ago
#1166 - lgpio pin factory is broken on RPi5 since kernel 6.6.45
Issue -
State: open - Opened by HiassofT about 1 month ago
- 20 comments
#1165 - Add gpiod pin factory
Pull Request -
State: open - Opened by warthog618 about 1 month ago
- 3 comments
#1163 - No acces dev/mem.
Issue -
State: closed - Opened by KzalanK about 1 month ago
#1162 - Contructor parameter "chip" of class LGPIOFactory is ignored
Issue -
State: open - Opened by tgz-cz 2 months ago
- 1 comment
#1160 - Raspberry Pi 5 not defined in native.py
Issue -
State: closed - Opened by Uvis-Acurable 2 months ago
#1156 - If I have an SPI device, can I implement it by inheriting from the SPI device?
Issue -
State: closed - Opened by Darwinnpos 3 months ago
#1154 - InputDevice pull up parameter not working gpiozero raspberry pi 5
Issue -
State: closed - Opened by sayedMbo 3 months ago
#1151 - two python scripts monitoring the same gpio pin at the same time
Issue -
State: closed - Opened by gldrplt 4 months ago
- 2 comments
#1150 - Fix syntax typo in recipes_remote_gpio.rst
Pull Request -
State: closed - Opened by lurch 4 months ago
- 1 comment
#1149 - Remove unused imports
Pull Request -
State: open - Opened by Siecje 4 months ago
#1148 - Fix multi_room_doorbell.py example
Pull Request -
State: closed - Opened by Siecje 4 months ago
- 1 comment
#1147 - Add speed/direction motor
Pull Request -
State: open - Opened by pigrammer3 4 months ago
- 9 comments
#1146 - Output pins left in floating state instead of low input state after program end
Issue -
State: open - Opened by Nilles3D 5 months ago
- 1 comment
#1144 - no logro mover los servo motores a 180°
Issue -
State: closed - Opened by dart01 5 months ago
#1142 - Lingering On LED
Issue -
State: closed - Opened by SalvadorZXA 5 months ago
#1140 - PiGPIOFactory stops my servo from rotating
Issue -
State: closed - Opened by hongfeij 5 months ago
#1139 - Syntax Error during import
Issue -
State: closed - Opened by HyunNuri 5 months ago
#1138 - Button not working with gpiozero
Issue -
State: open - Opened by harshvardhanagrawal 6 months ago
- 4 comments
#1137 - NativeFactory `wait_for_press` and `when_activated` callbacks not called
Issue -
State: open - Opened by NeonDaniel 6 months ago
- 2 comments
#1136 - Raspbian 12 BookWorm, kernel 6.6.20: RuntimeError: Failed to add edge detection
Issue -
State: open - Opened by f18m 6 months ago
- 6 comments
#1135 - LightSensor() no longer works under Raspbian Bookworm / Linux 6.6.20
Issue -
State: open - Opened by danny-andersen 6 months ago
- 4 comments
#1134 - really drop python<=3.7 support
Pull Request -
State: open - Opened by kloczek 6 months ago
- 2 comments
#1133 - Documentation - Pi5
Issue -
State: open - Opened by bsimmo 6 months ago
- 1 comment
#1132 - Documentation - "Bookworm"
Issue -
State: open - Opened by bsimmo 6 months ago
- 1 comment
#1131 - gpiozero does not work on Linux Kernel 6.6.20
Issue -
State: open - Opened by danny-andersen 6 months ago
- 16 comments
#1130 - gpiozero failure run from systemd after update
Issue -
State: open - Opened by jnob1 6 months ago
- 2 comments
#1129 - add rgpio support
Pull Request -
State: open - Opened by Leo-C 7 months ago
#1127 - Support for: Raspberry Pi Pico (+Pico W) Remote GPIO?
Issue -
State: closed - Opened by PizzaProgram 7 months ago
- 1 comment
#1126 - Add a PWMInputDevice class
Issue -
State: open - Opened by dancaugherty 7 months ago
- 1 comment
#1124 - Fix class graph generation
Pull Request -
State: open - Opened by MusicalNinjaDad 7 months ago
#1123 - Generating class diagrams for docs fails (silently) and breaks diagrams
Issue -
State: open - Opened by MusicalNinjaDad 7 months ago
#1122 - Support venv and use of github actions for contributors
Pull Request -
State: open - Opened by MusicalNinjaDad 7 months ago
#1121 - Documentation tweak
Pull Request -
State: closed - Opened by lurch 7 months ago
#1120 - No module named 'lgpio'
Issue -
State: closed - Opened by EDIflyer 8 months ago
- 8 comments
#1118 - ensure python3.7 compatibility - closes #1113
Pull Request -
State: closed - Opened by MusicalNinjaDad 8 months ago
- 4 comments
#1116 - Make TimeOfDay timezone aware - closes #1111
Pull Request -
State: open - Opened by MusicalNinjaDad 8 months ago
- 8 comments
#1115 - Lgpio doesn't work with gpiod 0.2
Issue -
State: open - Opened by Dennis-89 8 months ago
- 1 comment
#1114 - Basic recipe won't work with i2c servo HAT in use.
Issue -
State: open - Opened by Kilted-Weaver 8 months ago
- 3 comments
#1113 - 3rd party import-metadata not supported?
Issue -
State: closed - Opened by GoremanX 8 months ago
- 11 comments
Labels: bug
#1112 - Python 3.12 compatibility
Pull Request -
State: closed - Opened by MusicalNinjaRandInt 9 months ago
- 4 comments
#1111 - Date deprectation warnings
Issue -
State: open - Opened by MusicalNinjaRandInt 9 months ago
- 1 comment
#1110 - Remove contributing hurdles - resolves #1109
Pull Request -
State: closed - Opened by MusicalNinjaRandInt 9 months ago
- 1 comment
#1109 - First contribution hurdles in .gitignore, workflow, scripts
Issue -
State: open - Opened by MusicalNinjaRandInt 9 months ago
#1108 - move pytest fixtures to own module - closes #1087
Pull Request -
State: open - Opened by MusicalNinjaRandInt 9 months ago
#1107 - Move pytest fixtures to own module - closes #1087
Pull Request -
State: closed - Opened by MusicalNinjaRandInt 9 months ago
- 8 comments
#1106 - Scripts don't work if user doesn't have write permission to CWD
Issue -
State: open - Opened by HiassofT 9 months ago
- 7 comments
#1105 - Hi, I got an error when I use this repo in Raspberry Pi 5.
Issue -
State: closed - Opened by FLamefiREz 9 months ago
- 4 comments
#1104 - Small docs typo
Pull Request -
State: closed - Opened by lurch 9 months ago
#1103 - GPIOZERO version 2.0 problem
Issue -
State: closed - Opened by gldrplt 9 months ago
- 1 comment
#1101 - Error with Bookworm 64bit and Pi 5
Issue -
State: closed - Opened by shreblov 10 months ago
- 2 comments
#1100 - RFE: is it possible to start making github releases?🤔
Issue -
State: open - Opened by kloczek 11 months ago
#1099 - Support setting custom active_state for InputDevice
Pull Request -
State: open - Opened by Makman2 11 months ago
- 2 comments
#1098 - feature: show OTP boot status when applicable
Issue -
State: open - Opened by roycewilliams 11 months ago
- 1 comment
#1097 - feature: show release date and manufacturer based on board revision
Issue -
State: closed - Opened by roycewilliams 11 months ago
- 3 comments
#1096 - Add note on `pinout` cli that the tool is provided by gpiozero
Issue -
State: open - Opened by bennuttall 11 months ago
- 2 comments
#1095 - Button hold delay + hold repeat rate
Issue -
State: open - Opened by asztalosdani 12 months ago
- 3 comments
#1093 - Can I contribute an ADC0834 implementation?
Issue -
State: closed - Opened by hankehly 12 months ago
#1092 - Pi internal LEDs (47) no longer accessible with gpiozero v2.0
Issue -
State: open - Opened by ziddey 12 months ago
- 4 comments
Labels: documentation
#1091 - Pinout shows ??? on graphic display for Pi Zero 2 W? But /proc/cpuinfo shows correct information.
Issue -
State: open - Opened by Jibun-no-Kage 12 months ago
- 2 comments
#1090 - Version 2.0 Button class broken with LGPIOFactory
Issue -
State: open - Opened by mheidenreich 12 months ago
#1088 - 1.6.2: pytest is failing in `tests/test_spi.py::test_spi_hardware_write` unit and deprecation warnings
Issue -
State: open - Opened by kloczek about 1 year ago
- 5 comments
#1087 - MockFactory does not release pins on close()
Issue -
State: open - Opened by jornj about 1 year ago
- 1 comment
#1086 - RotaryEncoder - Increase resolution feature request
Issue -
State: open - Opened by KevWal about 1 year ago
- 2 comments
#1086 - RotaryEncoder - Increase resolution feature request
Issue -
State: open - Opened by KevWal about 1 year ago
- 2 comments
#1084 - RuntimeError: Failed to add edge detection
Issue -
State: closed - Opened by TheLostProgrammer over 1 year ago
- 1 comment
#1084 - RuntimeError: Failed to add edge detection
Issue -
State: closed - Opened by TheLostProgrammer over 1 year ago
- 1 comment
#1082 - Ubuntu DigitalInputDevice .when_activated not firing
Issue -
State: closed - Opened by KevWal over 1 year ago
- 1 comment
#1082 - Ubuntu DigitalInputDevice .when_activated not firing
Issue -
State: closed - Opened by KevWal over 1 year ago
- 1 comment
#1080 - 15. API - SPI Devices states is misleading
Issue -
State: open - Opened by Milliways2 over 1 year ago
- 1 comment
#1079 - Document wait_for_press return value (re: timeout)
Issue -
State: open - Opened by uggoth over 1 year ago
- 3 comments
Labels: documentation
#1076 - KY-038 microphone device
Issue -
State: open - Opened by MalcolmMielle over 1 year ago
- 1 comment
#1074 - FAQ: Pin already in use
Issue -
State: open - Opened by bennuttall over 1 year ago
Labels: documentation
#1072 - Error with DistanceSensor "pull_up:False"
Issue -
State: closed - Opened by carlestecno over 1 year ago
#1071 - No error is thrown for a DistanceSensor that is not plugged in
Issue -
State: open - Opened by wederer over 1 year ago
- 3 comments
#1070 - Add I2C support and support for INA219 device (from pi-ina219)
Pull Request -
State: open - Opened by TiborVoelcker over 1 year ago
- 3 comments
#1068 - orange pi 5
Issue -
State: closed - Opened by Dmitrium12 over 1 year ago
#1066 - GPIO output doesn't show up in /sys/class/gpio and GPIO inputs are destroyed at program exit
Issue -
State: closed - Opened by gitterman over 1 year ago
#1063 - Add support for lgpio 0.2
Pull Request -
State: closed - Opened by guppy almost 2 years ago
- 2 comments
#1062 - RotaryEncoder - missing transitions
Issue -
State: open - Opened by flycast about 2 years ago
- 5 comments
#1061 - Having errors when using in GreenGrass environment. Can run manually successfully
Issue -
State: closed - Opened by flycast about 2 years ago
- 1 comment
#1059 - Having errors when using in GreenGrass environment. Can run manually sucessfully
Issue -
State: closed - Opened by flycast about 2 years ago
- 2 comments
#1058 - Relay Turn off if I don't set pause()
Issue -
State: open - Opened by markofranjic about 2 years ago
- 2 comments
#1057 - lgpio.error: 'GPIO busy' | when imported from another script
Issue -
State: closed - Opened by WerdoxDev about 2 years ago
- 3 comments
#1054 - GPIO Zero Hx711 remote connection
Issue -
State: closed - Opened by iyssoft about 2 years ago
#1052 - Be able to use a list to define the pins for ButtonBoard
Issue -
State: closed - Opened by Kayakbabe about 2 years ago
- 2 comments
#1051 - ButtonBoard.when_pressed or when_held could report the pins that are being held
Issue -
State: open - Opened by Kayakbabe about 2 years ago
#1048 - servo not responding in funktions
Issue -
State: closed - Opened by MeiterHannes over 2 years ago
- 3 comments
#1048 - servo not responding in funktions
Issue -
State: closed - Opened by MeiterHannes over 2 years ago
- 3 comments
#1047 - Add missing pin_factory=pin_factory parameters in some constructors
Pull Request -
State: closed - Opened by lurch over 2 years ago
#1046 - Audio Connection Breaks Distance Sensor / Code Somehow
Issue -
State: closed - Opened by tjex over 2 years ago
- 3 comments
#1046 - Audio Connection Breaks Distance Sensor / Code Somehow
Issue -
State: closed - Opened by tjex over 2 years ago
- 3 comments
#1045 - Motor pin problem
Issue -
State: open - Opened by digitaldick over 2 years ago
- 9 comments
#1044 - DistanceSensor rise edge detection not having level 1
Issue -
State: open - Opened by davidm3i over 2 years ago
- 1 comment
#1044 - DistanceSensor rise edge detection not having level 1
Issue -
State: open - Opened by davidm3i over 2 years ago
- 1 comment