Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / gbmhunter/eng-calcs-js issues and pull requests
#97 - Fix table in the 'pcb-track-current-capability-ipc-2152' calculator so that the 3D model spans every row.
Issue -
State: open - Opened by gbmhunter over 9 years ago
Labels: bug
#96 - Add a WebGL renderer for 3D models, falling back to a canvas renderer if not available.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: enhancement
#95 - Look into using threejs.org to create 3D track/PCB model for the 'pcb-track-current-capability-ipc-2152' calculator.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: enhancement
#94 - Make sure plane proximity distance can't be set to anything larger than total board thickness in the 'pcb-track-current-capability-ipc-2152' calculator.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: bug
#93 - Minimum track width can go negative in the 'pcb-track-current-capability-ipc-2152' calculator (e.g. make track thickness 1000mm).
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: bug
#92 - Track thickness in the 'pcb-track-current-capability-ipc-2152' calculator can go up to 1000mm without any warning.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: bug
#91 - Add 'Powered by candy-calc' text to the bottom of every calculator.
Issue -
State: open - Opened by gbmhunter over 9 years ago
Labels: enhancement
#90 - Change default units for the 'pcb-track-current-capabilty-ipc-2152' calculator to more appropriate values.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: bug
#89 - Units for thermal conductivity variable in the 'pcb-track-current-capability-ipc-2152' calculator need capital K not small k.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: bug
#88 - Add buttons to the 'pcb-track-current-capability-ipc-2152' calculator to select 'Standard Metric Units For All' and 'Select Imperial Units For All'.
Issue -
State: open - Opened by gbmhunter over 9 years ago
Labels: enhancement
#87 - Convert the 2 to the 'squared' symbol for the adjusted track cross-sectional area variable units in the 'pcb-track-current-capabilty-ipc-2152' calculator.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: enhancement
#86 - Add degrees fahrenheit as a unit to the 'Temp Rise' variable in the 'pcb-track-current-capability-ipc-2152' calculator.
Issue -
State: open - Opened by gbmhunter over 9 years ago
Labels: enhancement
#85 - Rename the 'pcb-track-width' calculator to 'pcb-track-current-capability-ipc-2221a'.
Issue -
State: open - Opened by gbmhunter over 9 years ago
Labels: enhancement
#84 - Fix validators in the 'pcb-track-current-capability-ipc-2152' calculator.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: bug
#83 - readmore.js is not working correctly for images and objects that dynamically change height.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: bug
#82 - Modify jQuery selector for readmore.js comments to the comment class can be added to <td> object rather than the child <div>.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: bug
#81 - Hide intermediate calculations in the 'pcb-track-current-capability-ipc-2152' calculator.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: enhancement
#80 - Change all incorrect 'maxHeight' readmore.js parameters to 'collapsedHeight'.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: bug
#79 - Add 'read less' options for all of the variable comments in the 'pcb-track-current-capability-ipc-2152' calculator.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: enhancement
#78 - Add PCB track current capability calculator based on the IPC-2152 standard.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: enhancement
#77 - Add PCB trace current calculator which uses IPC-2152.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
- 1 comment
Labels: enhancement
#76 - Reconfigure code to access all external dependencies through the folder '/lib'.
Issue -
State: closed - Opened by gbmhunter over 9 years ago
Labels: enhancement
#75 - Add inches as a unit to the linear dimensions on the PCB track current calculator.
Issue -
State: open - Opened by gbmhunter about 10 years ago
Labels: enhancement
#74 - Add recently added calculators descriptions to the README.
Issue -
State: open - Opened by gbmhunter about 10 years ago
Labels: enhancement
#73 - Add PCB track size calculator.
Issue -
State: closed - Opened by gbmhunter about 10 years ago
Labels: enhancement
#72 - Add a 'read more' JS plugin that allows to to minimise the extra information surrounding the calculator.
Issue -
State: closed - Opened by gbmhunter about 10 years ago
Labels: enhancement
#71 - Add the ability to select closest resistor series resistor for resistor divider calc.
Issue -
State: open - Opened by gbmhunter about 10 years ago
Labels: enhancement
#70 - Add validator for the input in the 'Standard Resistance' calculator.
Issue -
State: closed - Opened by gbmhunter about 10 years ago
Labels: enhancement
#69 - Add percentages next to series selection in the 'Standard Resistance' calculator.
Issue -
State: closed - Opened by gbmhunter about 10 years ago
Labels: enhancement
#68 - Fix bug where number in the Standard Resistance Calculator disappears if invalid character is added.
Issue -
State: closed - Opened by gbmhunter about 10 years ago
- 1 comment
Labels: bug
#67 - Change references from cladlab.com to mbedded.ninja.
Issue -
State: closed - Opened by gbmhunter about 10 years ago
Labels: enhancement
#66 - Add cable current/conductor size calculator, using AWG and metric system.
Issue -
State: open - Opened by gbmhunter over 10 years ago
Labels: enhancement
#65 - Add ability to choose whether resistance is closest match, or first highest/lowest.
Issue -
State: open - Opened by gbmhunter almost 11 years ago
Labels: enhancement
#64 - Make input fields green or red always, and glow when selected.
Issue -
State: open - Opened by gbmhunter almost 11 years ago
Labels: enhancement
#63 - Fix "If driving multiple is in series" In LT3745 calculator, should be LEDs.
Issue -
State: closed - Opened by gbmhunter almost 11 years ago
Labels: bug
#62 - Fix issue with 'Standard Resistance Finder" calculator and candy-calc "knockout-deferred-updates" library.
Issue -
State: open - Opened by gbmhunter almost 11 years ago
- 1 comment
Labels: bug
#61 - Fix bug when switching units on capacitor energy, capacitor charge and Ohms Law calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: bug
#60 - Remove MathJax include from the Heat Flow calculator
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: bug
#59 - Fix incorrect image link in Heat Flow calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: bug
#58 - Make Heat Flow calculator jQuery safe.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: bug
#57 - Make a radio button be selected by default on the Ohm's Law calculator.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: bug
#56 - Fix "has no method shadowVal" bug in Ohm's Law calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: bug
#55 - Add unit cell to percentage diff row in the Standard Resistance Finder table.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: bug
#54 - Add fw(act) and Rt calculations to the LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#53 - Add Rtset calculations to the LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#52 - Make sure fsw(act) was between 100kHz-1MHz and less than fsw(max).
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#51 - Make sure Iled(nom) is between 10 and 50mA.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#50 - Change Vbuck,out to Vout and make it an input in the LT3745 calc.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#49 - Recommend that Rfb1 be 10kR.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#48 - Add Vcc variable to LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#47 - Make sure Vin(min) cannot go less than 6V in LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#46 - Add rule that maximum input voltage has to be greater or equal to minimum input voltage in LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#45 - Add 55V limit to Vin(max) in LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: enhancement
#44 - Add image to Ohm's Law calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#43 - Fix disappearing value bug in Ohms Law calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: bug
#42 - Add capability for multiple calculators on one page, currently there are variable collisions.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
Labels: bug
#41 - Port all calculators to use candy-calc.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: enhancement
#40 - Add a correlation calculator for finding the relevance of one number to another.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: enhancement
#39 - Make input object width smaller.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#38 - Define the table width better. Currently defined as a fixed width (in pixels).
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#37 - Make output variables be displayed in a text box rather than an input (or an input with no border).
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 2 comments
Labels: enhancement
#36 - Renamed calculated variables to output variables and leave inputs as inputs.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#35 - Add "is number" validators to calc inputs.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#34 - Make long descriptions in table auto-hide.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#33 - Add legend to calculators showing valid and invalid values.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: enhancement
#32 - Add generic CSS file for all calculators.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#31 - Add rounding option to displayed values in calculators.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#30 - Making LT3745 calculator fields update on keypress (bind with onKeyUp event).
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#29 - Add proper name for vugf variable in LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
#28 - Add local storage to LT3745 calculator to remember values.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: enhancement
#27 - Replace all == null checks with initialisers when ko.observable() is called in LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
#26 - Make some of the equations in the LT3745 calculator table larger.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#25 - Add namespace-equivalent to each calculator so they are protected from duplicate variable names.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#24 - Add comments column to LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#23 - Add calculation for frequency resistor given the desired frequency.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: enhancement
#22 - Add red/green backgrounds to bad/o.k. values (within correct ranges).
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#21 - Add rounding to calculated values in the LT3745 calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#20 - Added title block to php files.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#19 - Numbers like 98, 99, 9.8 e.t.c cause NaN to appear on resistance calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 2 comments
Labels: bug
#18 - Add knockout.js to list of dependencies on README.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: bug
#17 - Rewrite thermal calc to use knockout.js.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#16 - Convert To MVVM pattern? (e.g. knockout.js?)
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#15 - Round the displayed value of Ractual in the standard resistance calc.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: enhancement
#14 - Change index.html filenames for each calc to something more descriptive.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#13 - Add best parallel combination finder to standard resistance calculator.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: enhancement
#12 - Add best series combination finder to standard resistance calculator.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: enhancement
#11 - Add E48, E92 and E192 arrays to the script file, rather than generating them.
Issue -
State: open - Opened by gbmhunter about 11 years ago
Labels: enhancement
#10 - Add standard resistance calculator info to README.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#9 - Finish standard resistance calculator.
Issue -
State: closed - Opened by gbmhunter about 11 years ago
- 1 comment
Labels: enhancement
#8 - Heat Flow Image SRC Needs To Be Relative To PHP File
Issue -
State: closed - Opened by gbmhunter over 11 years ago
- 1 comment
Labels: bug
#7 - Jquery Script Addition In Heat Flow Calculator Causes MegaMenu To Stop Working
Issue -
State: closed - Opened by gbmhunter over 11 years ago
- 1 comment
Labels: bug
#6 - Rename Heat Flow Calculator From Index.php
Issue -
State: closed - Opened by gbmhunter over 11 years ago
- 1 comment
Labels: enhancement
#5 - Add Ohms Law Calculator
Issue -
State: closed - Opened by gbmhunter over 11 years ago
- 1 comment
Labels: enhancement
#4 - Add Passive RC Filter Calculator
Issue -
State: open - Opened by gbmhunter over 11 years ago
Labels: enhancement
#3 - Add Capacitor Charge Calculator
Issue -
State: closed - Opened by gbmhunter over 11 years ago
Labels: enhancement
#2 - Add Capacitor Energy Calculator
Issue -
State: closed - Opened by gbmhunter over 11 years ago
Labels: enhancement
#1 - Add Resistor Divider Calculator
Issue -
State: open - Opened by gbmhunter over 11 years ago
Labels: enhancement