Ecosyste.ms: Issues

An open API service for providing issue and pull request metadata for open source projects.

GitHub / firmadyne/firmadyne issues and pull requests

#221 - Too many levels of symbolic links opening any binary.

Issue - State: closed - Opened by micsthepick 21 days ago - 1 comment

#217 - No images when running the extractor on the sample firmware

Issue - State: open - Opened by myasn1k over 1 year ago - 3 comments

#215 - extractor error

Issue - State: open - Opened by shihlien over 1 year ago - 1 comment

#100 - Could not open mtd device: rootfs

Issue - State: open - Opened by E4ck about 6 years ago - 4 comments

#99 - Most firmwares are able to be extracted?

Issue - State: closed - Opened by hehe1397 about 6 years ago - 5 comments

#98 - No Trophy Case

Issue - State: open - Opened by jeffreyroberts about 6 years ago - 1 comment

#97 - Nevermind. This issue can be deleted.

Issue - State: closed - Opened by greg5678 about 6 years ago

#96 - makeNetwork.py Error

Issue - State: closed - Opened by entr0pia about 6 years ago - 1 comment

#95 - Why the gcc failed to build?

Issue - State: open - Opened by hehe1397 about 6 years ago - 7 comments

#94 - Unable to execute the execute extractor.py

Issue - State: open - Opened by Minyanaing over 6 years ago - 2 comments

#93 - Unable to access ports on emulated firmware from host OS

Issue - State: open - Opened by alomk over 6 years ago - 10 comments

#92 - Repeating messages once started

Issue - State: closed - Opened by jocko96b over 6 years ago - 4 comments

#91 - Failed on Architecture Step

Issue - State: closed - Opened by jocko96b over 6 years ago - 2 comments

#90 - bugfix for #89 issue

Pull Request - State: closed - Opened by c0mix over 6 years ago

#89 - makeImage.sh with a wrong DEVICE variable value causes error

Issue - State: closed - Opened by c0mix over 6 years ago - 2 comments

#88 - qemu-system-mips: Invalid parameter 'vlan'

Issue - State: closed - Opened by joingh123 over 6 years ago - 9 comments

#87 - No interfaces found for Asus firmware (system still boots)

Issue - State: open - Opened by smirani2 over 6 years ago - 2 comments

#86 - Firmware can't taking IP on Ubuntu 18.04

Issue - State: closed - Opened by HtHuanChen over 6 years ago - 3 comments

#85 - Kernel panic - not syncing: Attempted to kill init

Issue - State: open - Opened by yindeming over 6 years ago - 5 comments

#84 - Incorrect use of regex in tar2db.py

Issue - State: closed - Opened by dfbravo over 6 years ago - 1 comment

#82 - Compiling from Source

Issue - State: closed - Opened by nghiphu over 6 years ago - 8 comments

#81 - Connect emulated firmware to Internet!

Issue - State: open - Opened by nghiphu over 6 years ago - 2 comments

#80 - How to using instrumentation of kernel

Issue - State: open - Opened by nghiphu over 6 years ago - 8 comments

#79 - How to using instrumentation of kernel

Issue - State: closed - Opened by nghiphu over 6 years ago - 1 comment

#78 - Netgear firmware unable to simulate in the firmadyne

Issue - State: open - Opened by susantaroy2002 over 6 years ago - 4 comments

#77 - Failed to create the vlan

Issue - State: closed - Opened by shellcong almost 7 years ago - 16 comments

#76 - Firmware "WNAP320_V3.7.9.0_firmware",infernetwork error.

Issue - State: closed - Opened by ftk-sostupid almost 7 years ago - 2 comments

#75 - Network problem. Run some firmware images

Issue - State: closed - Opened by VBukharov almost 7 years ago - 6 comments

#74 - How to find the tarballs of extracted filesystems firmware images?

Issue - State: open - Opened by swtkiwi almost 7 years ago - 15 comments

#73 - fixed getArch.sh return '' bug && add one more search directory

Pull Request - State: closed - Opened by xiaohuajiao almost 7 years ago

#72 - getArch return ''

Issue - State: closed - Opened by xiaohuajiao almost 7 years ago - 2 comments

#71 - gdbserver is not working on mipseb kernel (WNAP320 Firmware)

Issue - State: closed - Opened by ghost about 7 years ago - 11 comments

#70 - automated scripts

Pull Request - State: open - Opened by nodapCoder about 7 years ago - 2 comments

#69 - fixImage.sh: line 30: can't create /etc/passwd: nonexistent directory

Issue - State: open - Opened by tohaikmeng about 7 years ago - 3 comments

#68 - Cannot make filesystem

Issue - State: closed - Opened by zhuanpan about 7 years ago

#67 - Cannot make filesystem

Issue - State: open - Opened by zhuanpan about 7 years ago - 7 comments

#66 - No vulnerability information in SQL database

Issue - State: open - Opened by yyyolanda about 7 years ago - 1 comment

#65 - Where to find the results of vulnerabilities?

Issue - State: open - Opened by yuanchang200 about 7 years ago - 3 comments

#64 - No Network Connection (Netgear/ARM)

Issue - State: open - Opened by cndycc over 7 years ago - 2 comments

#63 - ssh port is not open after emulating firmware using firmadyne

Issue - State: open - Opened by ghost over 7 years ago - 10 comments

#62 - makeNetwork script error

Issue - State: open - Opened by HacKeD0x90 over 7 years ago - 5 comments

#61 - Can't start web server

Issue - State: open - Opened by jinyu00 over 7 years ago - 3 comments

#60 - Interface is not found in DJI Matrice 100 drone

Issue - State: open - Opened by chen1602 over 7 years ago - 1 comment

#59 - Can't access the shell

Issue - State: open - Opened by mikelhpdatke over 7 years ago - 2 comments

#58 - Programatic network reachability test

Issue - State: open - Opened by dfbravo over 7 years ago - 1 comment

#57 - Problems when initiating libnvram with ARCH=mipsel

Issue - State: open - Opened by mikelhpdatke over 7 years ago - 9 comments

#56 - AttributeError: 'module' object has no attribute 'scan'

Issue - State: open - Opened by luffynami27 over 7 years ago - 3 comments

#55 - Printing debug output from libnvram

Issue - State: closed - Opened by prashast over 7 years ago - 2 comments

#54 - 2 Bridge IPs and VLAN has no NIC

Issue - State: open - Opened by adi0x90 over 7 years ago - 1 comment

#53 - No IP for interface when emulating netgear r6250 firmware

Issue - State: open - Opened by j3rg over 7 years ago - 4 comments

#52 - Some issue about can't nc

Issue - State: open - Opened by p611148aadsl over 7 years ago - 2 comments

#50 - arch='armel' can't emulate network successfully

Issue - State: open - Opened by MikimotoH almost 8 years ago - 9 comments

#49 - get_scratch fails when run from command-line instead of script

Issue - State: open - Opened by dfbravo almost 8 years ago - 1 comment

#48 - netgear123456 login failure

Issue - State: closed - Opened by ykddd almost 8 years ago - 3 comments

#47 - Firmware not taking IP

Issue - State: open - Opened by HacKeD0x90 almost 8 years ago - 22 comments

#46 - Debugging firmware images that aren't successfully emulated

Issue - State: closed - Opened by prashast almost 8 years ago - 15 comments

#45 - MIPS From Source

Issue - State: closed - Opened by ksbickmore almost 8 years ago - 1 comment

#44 - MIPS kernel

Issue - State: closed - Opened by prashast almost 8 years ago - 1 comment

#43 - 'statSetsockopt : Protocol not available' Error

Issue - State: open - Opened by 0roman almost 8 years ago - 3 comments

#42 - resolve links before creating files in /etc

Pull Request - State: closed - Opened by kyechou about 8 years ago - 3 comments

#40 - delete.sh uses the wrong TAP name when disabling the TAP device

Issue - State: closed - Opened by dfbravo about 8 years ago - 1 comment

#39 - run.sh generate by makeNetwork.py uses wrong path for preInit.sh

Issue - State: closed - Opened by dfbravo about 8 years ago - 1 comment

#38 - wnap320 new Firmware wont emulate

Issue - State: open - Opened by jan85f about 8 years ago - 2 comments

#37 - VLAN problem

Issue - State: closed - Opened by xOmenus about 8 years ago - 3 comments

#36 - Setting NVRAM default values without recompilation?

Issue - State: closed - Opened by dfbravo about 8 years ago - 3 comments

#35 - Generated run.sh does not exit properly

Issue - State: closed - Opened by dfbravo about 8 years ago - 1 comment

#34 - Can firmadyne do static analysis of extracted firmwares?

Issue - State: open - Opened by bennyjiang about 8 years ago - 1 comment

#33 - netgear123456 login

Issue - State: closed - Opened by bennyjiang about 8 years ago - 10 comments

#32 - Firmware Login - inferNetwork

Issue - State: closed - Opened by decidedlygray about 8 years ago - 4 comments

#31 - How can I run Armeb Architecture

Issue - State: closed - Opened by xhopkins about 8 years ago - 1 comment

#30 - ProgrammingError: relation "image" does not exist

Issue - State: closed - Opened by xhopkins about 8 years ago - 3 comments

#29 - firmadyne.config not found error in inferNetwork.sh

Issue - State: closed - Opened by tabishimran about 8 years ago - 6 comments

#28 - /libnvram.override not created - error in makeImage.sh

Issue - State: open - Opened by wdormann about 8 years ago - 11 comments

#27 - makeNetwork.sh line 182 dev error

Issue - State: closed - Opened by icepng about 8 years ago - 3 comments

#26 - Run.sh executed successfully, but could not connect to the firmware.

Issue - State: open - Opened by kkkpoh about 8 years ago - 3 comments

#25 - /libnvram.defaults not created

Issue - State: closed - Opened by trentn about 8 years ago - 1 comment

#24 - FAT - Object has no attribute database

Issue - State: open - Opened by irini90 about 8 years ago - 10 comments

#23 - Firmware login - inferNetwork

Issue - State: open - Opened by 0BuRner about 8 years ago - 7 comments

#22 - Few firmware doesn't work on Kali linux

Issue - State: open - Opened by arunmagesh over 8 years ago - 3 comments

#21 - FIRMWARE_DIR: unbound variable

Issue - State: open - Opened by ghost over 8 years ago - 7 comments

#19 - is it a mistake?

Issue - State: closed - Opened by 1163307648 over 8 years ago - 1 comment

#18 - how to set FIRMWARE_DIR

Issue - State: closed - Opened by 1163307648 over 8 years ago - 1 comment

#17 - What's the username&password for the demo firmware

Issue - State: closed - Opened by fashioncj over 8 years ago - 3 comments

#16 - change some commands to make it more general to other linux distro

Pull Request - State: closed - Opened by kyechou over 8 years ago - 1 comment

#15 - Stuck in inferNetwork.sh

Issue - State: open - Opened by Puzzor over 8 years ago - 5 comments

#14 - Can't ping host from within emulated system

Issue - State: closed - Opened by ackerleytng over 8 years ago - 4 comments

#13 - bind: Address already in use

Issue - State: closed - Opened by allRiceOnMe over 8 years ago - 2 comments

#12 - It seems firmadyne can't find any network interfaces

Issue - State: open - Opened by ghost over 8 years ago - 1 comment

#11 - check network reachable automatically; get database value without inputting password

Pull Request - State: open - Opened by MikimotoH over 8 years ago - 1 comment

#10 - script to delete a project

Pull Request - State: closed - Opened by m-1-k-3 over 8 years ago

#9 - Nmap analyzer script

Pull Request - State: closed - Opened by m-1-k-3 over 8 years ago - 1 comment

#8 - Kernel panic - not syncing: No init found

Issue - State: open - Opened by mrmacete almost 9 years ago - 7 comments

#7 - inferNetwork.sh script failed on multiple firmwares

Issue - State: closed - Opened by ivytin almost 9 years ago - 2 comments

#6 - Can't find ./scratch/1/run.sh !

Issue - State: closed - Opened by azzeddineazzeddine almost 9 years ago - 7 comments

#5 - /script/makeNetwork.py undefined var

Issue - State: closed - Opened by ivytin almost 9 years ago - 1 comment