Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / emsesp/EMS-ESP32 issues and pull requests
#1476 - Entity Customisations are saved over reboot, and can not be saved in System->Download
Issue -
State: closed - Opened by Pelgarnaal 7 months ago
- 11 comments
Labels: bug, help wanted
#1475 - Get/set compressor max power
Issue -
State: open - Opened by petslane 7 months ago
- 7 comments
#1474 - MQTT for non standard port always uses TLS
Issue -
State: closed - Opened by ThetaGamma 7 months ago
- 3 comments
#1473 - roll back dom-router changes
Pull Request -
State: closed - Opened by proddy 7 months ago
#1471 - Some new/fixed entities
Pull Request -
State: closed - Opened by MichaelDvP 7 months ago
- 2 comments
#1470 - HA don't set entity_category to Diagnostic/Configuration for EMS entities
Pull Request -
State: closed - Opened by proddy 7 months ago
#1465 - fix router loops
Pull Request -
State: closed - Opened by proddy 7 months ago
- 3 comments
#1464 - revert to react-router-dom 6.18.0 to bring blue tab line back
Pull Request -
State: closed - Opened by MichaelDvP 7 months ago
- 1 comment
#1463 - Add Heatpump Energy Consumption & Produced
Issue -
State: open - Opened by proddy 7 months ago
- 1 comment
Labels: enhancement
#1461 - revert to react-router-dom 6.19.0 to fix tab-routing-issue
Pull Request -
State: closed - Opened by MichaelDvP 7 months ago
- 1 comment
#1460 - revert to react-router-dom 6.19.0 to fix tab-routing-issue
Pull Request -
State: closed - Opened by MichaelDvP 7 months ago
#1458 - 3.6.5-dev.0
Pull Request -
State: closed - Opened by proddy 7 months ago
#1457 - update packages
Pull Request -
State: closed - Opened by proddy 7 months ago
#1456 - VR4 and TW1 in Home Assistant
Issue -
State: closed - Opened by HansRemmerswaal 7 months ago
- 4 comments
#1455 - fix boiler commands to ems telegrams
Pull Request -
State: closed - Opened by MichaelDvP 7 months ago
- 5 comments
#1454 - Worcester Bosch 8000 not allowing Burner Max Power < 50 %
Issue -
State: closed - Opened by desperatedave 7 months ago
- 1 comment
#1453 - Last Error and/or actual error Message not updatet @ GB172 with RC300
Issue -
State: open - Opened by Peter-Aschinger 8 months ago
- 2 comments
#1452 - WW Mode - Rego 3000/UI800/WSW196i/BC400
Issue -
State: open - Opened by Bingo2023 8 months ago
- 3 comments
#1451 - next fix RC300 mode
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
- 1 comment
#1450 - Write Access to Thermostat RC310 does not work any more in latest Versions
Issue -
State: closed - Opened by DoubleYou2 8 months ago
- 19 comments
#1448 - unrecognized EMS device ID 0x38 and ID 0x39
Issue -
State: open - Opened by demerstraat 8 months ago
- 20 comments
#1446 - add boost mode for heating
Issue -
State: open - Opened by Bingo2023 8 months ago
- 2 comments
#1445 - patch for 3.6.3 with fixes #1440 #1442
Pull Request -
State: closed - Opened by proddy 8 months ago
#1444 - set/read thermostat mode for RC100-RC300, fix #1440 and fix #1442
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
- 1 comment
#1443 - missleading label name
Issue -
State: open - Opened by Bingo2023 8 months ago
- 4 comments
#1442 - After Update from 3.6.2 to 3.6.3 some entities are not available in HA any more
Issue -
State: closed - Opened by DoubleYou2 8 months ago
- 10 comments
Labels: bug
#1440 - hc1 mode off when set to manual
Issue -
State: closed - Opened by philrich 8 months ago
- 4 comments
Labels: bug
#1439 - prepare another 3.6.3 build with board profile fixed
Pull Request -
State: closed - Opened by proddy 8 months ago
#1439 - prepare another 3.6.3 build with board profile fixed
Pull Request -
State: closed - Opened by proddy 8 months ago
#1438 - fix crash on wrong thermostat mode command (if not using HA)
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
- 1 comment
#1438 - fix crash on wrong thermostat mode command (if not using HA)
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
- 1 comment
#1437 - update changelog
Pull Request -
State: closed - Opened by proddy 8 months ago
#1436 - 3.6.4-dev-0
Pull Request -
State: closed - Opened by proddy 8 months ago
#1435 - prepare for 3.6.3 release
Pull Request -
State: closed - Opened by proddy 8 months ago
#1434 - fix web building with vite 5
Pull Request -
State: closed - Opened by proddy 8 months ago
#1433 - Cannot Connect to WiFi - always in "fallback" mode
Issue -
State: closed - Opened by kriger1965 8 months ago
- 38 comments
#1432 - fix building on osx, some package updates again
Pull Request -
State: closed - Opened by proddy 8 months ago
#1431 - RC35 /GB135 Error switching hc1 mode to day/night/auto
Issue -
State: open - Opened by krambox 8 months ago
- 4 comments
#1430 - fix for export_values and new command_allvalues()
Pull Request -
State: closed - Opened by proddy 8 months ago
- 2 comments
#1429 - in sync with dev
Pull Request -
State: closed - Opened by proddy 8 months ago
#1428 - latest changes
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
- 3 comments
#1427 - wwtapactivated - Message if no shower is used ?
Issue -
State: closed - Opened by zibous 8 months ago
- 2 comments
#1426 - fix bug when traversing ems devices when using cmd allvalues
Pull Request -
State: closed - Opened by proddy 8 months ago
- 4 comments
#1425 - only send command and value to backend write service
Pull Request -
State: closed - Opened by proddy 8 months ago
#1424 - Entry for hc1 own program 1 switchtime
Issue -
State: closed - Opened by mwolle 8 months ago
- 4 comments
Labels: help wanted
#1423 - custom variables
Issue -
State: open - Opened by proddy 8 months ago
- 7 comments
Labels: enhancement
#1422 - Add options to invert RX and TX and to enable pullup on RX
Pull Request -
State: closed - Opened by ellepdesk 8 months ago
- 4 comments
#1420 - Missing sensor values after upgrade (and it's not a rename)
Issue -
State: closed - Opened by HansRemmerswaal 8 months ago
- 28 comments
#1419 - Unable to flash Firmware to ESP32 32S.
Issue -
State: closed - Opened by Raybom 8 months ago
- 2 comments
Labels: help wanted
#1418 - show UOM in console when 'show values'. And added a new system command called 'values' which dumps the same to JSON
Pull Request -
State: closed - Opened by proddy 8 months ago
#1417 - uptime, inputs, output EA0, HIU entities
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
#1416 - Incorrect value of total uptime (ubauptime)
Issue -
State: closed - Opened by KarstenBr 8 months ago
- 10 comments
Labels: enhancement
#1415 - Add new signal for condensate reservoir heating EA0 to message 0x48D (hppwr)
Issue -
State: open - Opened by KarstenBr 8 months ago
- 2 comments
Labels: enhancement
#1414 - Unable to set hc1_mode on BC400/GB172i.2 combo
Issue -
State: closed - Opened by h3llsp4wn88 8 months ago
- 17 comments
Labels: enhancement
#1411 - fix HA warnings - add a device name - #1393
Pull Request -
State: closed - Opened by proddy 8 months ago
#1410 - Missing entity Hot Water Priority @Buderus Logano GB212 + RC300
Issue -
State: open - Opened by Fiona3600 8 months ago
- 16 comments
Labels: enhancement
#1409 - fix `retTemp`, #1334
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
#1408 - update gh actions
Pull Request -
State: closed - Opened by proddy 8 months ago
#1407 - remove set command (with no args)
Pull Request -
State: closed - Opened by proddy 8 months ago
#1406 - Too many arguments for command when using "set timeout 0"
Issue -
State: closed - Opened by HansRemmerswaal 8 months ago
- 2 comments
#1405 - fix standalone compiling
Pull Request -
State: closed - Opened by proddy 8 months ago
#1403 - Incomplete Rx
Issue -
State: closed - Opened by FunnyPaul 8 months ago
- 3 comments
#1402 - package sync with dev
Pull Request -
State: closed - Opened by proddy 8 months ago
#1400 - Small change from my Dev2
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
- 2 comments
#1399 - hk1/summertemp in device 158 (RC300/...) vanished
Issue -
State: closed - Opened by harvey637 8 months ago
- 1 comment
#1398 - Extend "HK1 Mode"
Issue -
State: closed - Opened by Bingo2023 8 months ago
- 22 comments
Labels: enhancement
#1397 - Missing Values on BK13/BK15/Smartline/GB1x2
Issue -
State: open - Opened by stipzta 8 months ago
- 2 comments
#1396 - Non ASCII String in JSON / MQTT Message
Issue -
State: closed - Opened by DoubleYou2 8 months ago
- 8 comments
Labels: bug
#1395 - fix MQTT base with paths not working in HA [#1393]
Pull Request -
State: closed - Opened by proddy 8 months ago
#1394 - hybridSystem MQTT Monitoring in HA
Issue -
State: closed - Opened by FloCodeRian 8 months ago
- 3 comments
Labels: help wanted
#1393 - MQTT base with paths not working in HA
Issue -
State: closed - Opened by proddy 8 months ago
- 3 comments
Labels: bug
#1392 - EMS-ESP32 naming convention changed after upgrade. My historical data in Home Assistant are messed up
Issue -
State: closed - Opened by bartplessers 8 months ago
- 7 comments
#1391 - sync with latest dev
Pull Request -
State: closed - Opened by proddy 8 months ago
#1390 - update changelog and bump version
Pull Request -
State: closed - Opened by proddy 8 months ago
#1389 - Add new entity: dhw Mode switch on entities | HC delay modes
Issue -
State: open - Opened by MichScha 8 months ago
- 1 comment
#1388 - Input states from message 0x4A2 not visible in entity list although being correctly received from boiler
Issue -
State: open - Opened by KarstenBr 8 months ago
- 7 comments
#1387 - Missing Values and naming for FreshwaterStation connected to MS100 dip setting3
Issue -
State: open - Opened by philipherbert 8 months ago
- 10 comments
#1386 - Add new entity for 4-way-valve in message 0x4A2
Issue -
State: closed - Opened by KarstenBr 8 months ago
- 8 comments
Labels: enhancement
#1385 - Extend meaning of hpactivity in 0x48D by a further operational mode for "evaporator defrosting"
Issue -
State: closed - Opened by KarstenBr 8 months ago
- 5 comments
Labels: enhancement
#1384 - Update and fix translation
Pull Request -
State: closed - Opened by WiktorBuczko 8 months ago
- 7 comments
#1383 - no commands for nrgheat & nrgww - #1382
Pull Request -
State: closed - Opened by proddy 8 months ago
- 2 comments
#1382 - Energy/power entities need to have "diagnostic" as category set in HA to avoid warnings
Issue -
State: closed - Opened by proddy 8 months ago
- 7 comments
Labels: bug
#1381 - Dev2: relais, fix exhausttemp, fix RC20 remote
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
#1379 - Buderus FS27/3E identified as Solar Module
Issue -
State: open - Opened by philipherbert 8 months ago
- 18 comments
#1378 - Problems with central RC30 and two RC20 as remote
Issue -
State: closed - Opened by Megapit 8 months ago
- 9 comments
Labels: enhancement
#1377 - small updates
Pull Request -
State: closed - Opened by proddy 8 months ago
#1376 - Dev2
Pull Request -
State: closed - Opened by proddy 8 months ago
#1375 - Support for Relay's
Issue -
State: open - Opened by proddy 8 months ago
- 13 comments
Labels: enhancement
#1374 - Dev2
Pull Request -
State: closed - Opened by proddy 8 months ago
#1373 - support String entities in Home Assistant
Issue -
State: closed - Opened by proddy 8 months ago
- 2 comments
Labels: enhancement
#1372 - shower duration in sec
Pull Request -
State: closed - Opened by proddy 8 months ago
#1371 - small things
Pull Request -
State: closed - Opened by proddy 8 months ago
#1369 - Testbuild
Pull Request -
State: closed - Opened by MichaelDvP 8 months ago
- 1 comment
#1368 - use DEBUG logging for commands with json output - #1364
Pull Request -
State: closed - Opened by proddy 8 months ago
#1366 - Inconsistent naming
Issue -
State: open - Opened by unstressable 8 months ago
- 14 comments
#1365 - 3.6.3-dev.5
Pull Request -
State: closed - Opened by proddy 8 months ago
#1364 - Avoid API Calls being listed as warnings within System Log
Issue -
State: closed - Opened by tp1de 8 months ago
- 10 comments
Labels: enhancement
#1363 - Unable to update from 3.6.1 to higher version via web-interface
Issue -
State: closed - Opened by kjw1985 8 months ago
- 13 comments
Labels: help wanted
#1362 - messing with yarn again (bored)
Pull Request -
State: closed - Opened by proddy 8 months ago
#1361 - Setting the values of the fresh water station (with SM100) is not working correct
Issue -
State: open - Opened by Cali1205 8 months ago
- 1 comment