Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / brainelectronics/micropython-modbus issues and pull requests
#93 - read_input_registers is limited 16 bit?
Issue -
State: open - Opened by mofm about 1 month ago
#92 - Does this require a specific micropython firmware version ? APPARENTLY NOT
Issue -
State: open - Opened by Philj6321 about 1 month ago
#91 - micropython hangs when stopping slave process
Issue -
State: open - Opened by Omid888 about 2 months ago
#90 - With PicoW - using your Modbus_TCP_Client_Read_Input_Status.py
Issue -
State: open - Opened by Philj6321 2 months ago
#89 - README.md: fixed typo uumodbus -> umodbus
Pull Request -
State: open - Opened by vermaete 3 months ago
#88 - Async slave for modbus RTU
Issue -
State: closed - Opened by Omid888 4 months ago
#87 - rtu slave with master on each uart
Issue -
State: open - Opened by modbusrtus 5 months ago
#86 - Response timeout of RTU master
Issue -
State: open - Opened by ondrej1024 5 months ago
- 4 comments
#85 - I can't install the library.
Issue -
State: open - Opened by AndreyVus 6 months ago
- 2 comments
Labels: documentation, question
#84 - closing connection on exit
Issue -
State: open - Opened by chinezbrun 6 months ago
#83 - Bugfix: 'on_get_cb': return value was swallowed
Pull Request -
State: open - Opened by hmaerki 6 months ago
- 2 comments
#82 - TypeError: extra keyword arguments given
Issue -
State: open - Opened by skylin008 8 months ago
- 1 comment
#81 - CRC16_TABLE memory footprint
Issue -
State: closed - Opened by florentbr 11 months ago
- 1 comment
#80 - modbus little endian
Issue -
State: open - Opened by patfrench 11 months ago
#79 - Add single char wait time after flush to avoid RTU control pin timing issue
Pull Request -
State: closed - Opened by brainelectronics 12 months ago
- 1 comment
Labels: bug
#78 - Add contribution guideline
Pull Request -
State: closed - Opened by brainelectronics 12 months ago
Labels: documentation
#77 - Question: Will the PR #75 works using async mode and/or when there is threads?
Issue -
State: open - Opened by beyonlo about 1 year ago
Labels: question
#76 - Use git attributes for better python diff
Pull Request -
State: open - Opened by wpyoga about 1 year ago
- 2 comments
#75 - Fix timing issues with UART communication
Pull Request -
State: closed - Opened by wpyoga about 1 year ago
- 6 comments
Labels: bug, enhancement
#74 - Allow inversion of serial signals
Pull Request -
State: open - Opened by sandyscott about 1 year ago
- 6 comments
Labels: enhancement
#73 - Handle control pin timing
Pull Request -
State: closed - Opened by brainelectronics about 1 year ago
- 5 comments
Labels: bug
#72 - Control Pin problem (remained to HIGH after several time of communication)
Issue -
State: closed - Opened by panther50500 about 1 year ago
- 5 comments
Labels: bug
#71 - Can't install using upip - ESP8266
Issue -
State: closed - Opened by thalesmaoa about 1 year ago
- 1 comment
#70 - Compatibility with W5500 or ENC28J60 - SPI to Ethernet Modules
Issue -
State: closed - Opened by ohbhatt about 1 year ago
- 1 comment
#69 - Value limits accepted by Slave on the Holding Register (HREGS)
Issue -
State: open - Opened by beyonlo over 1 year ago
- 5 comments
Labels: enhancement, question
#68 - Problem with RS485 direction control
Issue -
State: open - Opened by ondrej1024 over 1 year ago
- 12 comments
Labels: bug, question
#67 - Add contribution guideline
Issue -
State: closed - Opened by brainelectronics over 1 year ago
Labels: documentation, enhancement, CICD
#66 - Raspberry Pico Modbus TCP IO Device
Issue -
State: closed - Opened by cprobotik over 1 year ago
- 3 comments
#65 - #63: Create initial CITATION file
Pull Request -
State: closed - Opened by GimmickNG over 1 year ago
#64 - Support mip installation
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
Labels: documentation, enhancement
#63 - Cite this repository
Issue -
State: closed - Opened by GimmickNG over 1 year ago
- 6 comments
#62 - W600 and ESP8266 MemoryError
Issue -
State: open - Opened by sabeehalam over 1 year ago
- 10 comments
Labels: documentation, question
#61 - Implementing GPIO pins in TCP client mode on Pico
Issue -
State: closed - Opened by MartiMan79 over 1 year ago
- 3 comments
#60 - Cannot run example code (RTU Slave)
Issue -
State: closed - Opened by MGabeler over 1 year ago
- 8 comments
Labels: question
#59 - Add missing issues template and RP2 RTU usage examples
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
Labels: documentation, internal, client, host
#58 - Is Circuitpython supported?
Issue -
State: closed - Opened by toddkarin over 1 year ago
- 1 comment
Labels: question, wontfix
#57 - Trying to implement TCP client on RPi Pico with ETH HAT
Issue -
State: closed - Opened by MartiMan79 over 1 year ago
- 9 comments
Labels: documentation, help wanted, question
#56 - Add asyncio support
Pull Request -
State: open - Opened by GimmickNG over 1 year ago
- 231 comments
#55 - Update outdated documentation
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
- 3 comments
Labels: bug, documentation, internal
#54 - Instructions for install on boards without network capabilities
Issue -
State: closed - Opened by toddkarin over 1 year ago
- 3 comments
Labels: documentation
#53 - Allow client register access and setting at any position
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
- 4 comments
Labels: bug
#52 - Invalid CRC on reading multiple COILS
Issue -
State: closed - Opened by brainelectronics over 1 year ago
- 15 comments
Labels: bug, question, client, host
#51 - Feature/add callbacks to register get and set functions
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
- 15 comments
Labels: documentation, enhancement, client
#50 - Single Coil Write and Holding Register Write Initial Response Error
Issue -
State: open - Opened by j-broome over 1 year ago
- 11 comments
Labels: bug, question, client
#49 - Initial Response on Write Single Reg/Coil
Issue -
State: closed - Opened by j-broome over 1 year ago
- 1 comment
Labels: help wanted, invalid, question
#48 - Add testing framework for Modbus RTU
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
Labels: documentation, CICD, client, host
#47 - Add testing framework for ModbusRTU
Issue -
State: closed - Opened by brainelectronics over 1 year ago
Labels: documentation, internal, CICD, client, host
#46 - Add issue template file
Issue -
State: closed - Opened by brainelectronics over 1 year ago
- 1 comment
Labels: documentation, enhancement
#45 - Remove hardcoded UART ID from Modbus RTU
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
- 2 comments
Labels: bug, documentation
#44 - Update documentation for mip usage
Issue -
State: closed - Opened by brainelectronics over 1 year ago
Labels: documentation
#43 - Serial problem on RPi Pico W
Issue -
State: closed - Opened by animalmutch over 1 year ago
- 7 comments
Labels: documentation, question, client, host
#42 - Use most generic UART functions
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
- 1 comment
Labels: bug
#41 - Restore Client support for Modbus RTU
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
Labels: bug
#40 - RTU module does not support client mode
Issue -
State: closed - Opened by brainelectronics over 1 year ago
Labels: bug, host
#39 - Add all missing docstrings and typing hints, improve docs, fix some but not all bugs
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
- 6 comments
Labels: bug, documentation
#38 - Reading coil data bits is reversed
Issue -
State: open - Opened by brainelectronics over 1 year ago
- 7 comments
Labels: bug, client
#37 - Reading holding registers does always return all registers
Issue -
State: closed - Opened by brainelectronics over 1 year ago
- 2 comments
Labels: bug, client
#36 - Reading coils is limited to 8 bits
Issue -
State: closed - Opened by brainelectronics over 1 year ago
Labels: bug
#35 - Read/Write register at some location of definition
Issue -
State: closed - Opened by brainelectronics over 1 year ago
Labels: bug, client
#34 - 'UART' object has no attribute 'wait_tx_done'
Issue -
State: closed - Opened by volkar1 over 1 year ago
- 26 comments
Labels: bug
#33 - Create test framework
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
- 11 comments
Labels: bug, documentation, enhancement, CICD
#32 - Update README.md
Pull Request -
State: closed - Opened by wthomson over 1 year ago
Labels: documentation
#31 - It would be nice if there was an example of ModBus Slave talking to real hardware
Issue -
State: closed - Opened by jd-boyd over 1 year ago
- 2 comments
Labels: documentation, enhancement, client
#30 - How to read registers?
Issue -
State: closed - Opened by N3DTech over 1 year ago
- 5 comments
Labels: documentation, help wanted
#29 - Broken url on the tag 1.2.0
Issue -
State: closed - Opened by beyonlo over 1 year ago
- 1 comment
Labels: bug, documentation
#28 - Create test framework
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
- 1 comment
Labels: documentation, enhancement, internal, CICD
#27 - Add typing hints
Issue -
State: closed - Opened by brainelectronics over 1 year ago
- 1 comment
Labels: documentation, internal
#26 - Docs: request a simple doc about to create/extend `register definitions` (rules and meanings)
Issue -
State: closed - Opened by beyonlo over 1 year ago
- 2 comments
Labels: documentation
#25 - Bug: `register_qty` do not works on the `read_holding_registers()`
Issue -
State: closed - Opened by beyonlo over 1 year ago
- 1 comment
Labels: bug
#24 - Bug: `write_single_coil()` is settting all other coils to `False`
Issue -
State: closed - Opened by beyonlo over 1 year ago
- 6 comments
Labels: bug
#23 - Bug: error when trying to write multiple registers - `host.write_multiple_registers()`
Issue -
State: closed - Opened by beyonlo over 1 year ago
- 2 comments
Labels: bug
#22 - Bug: error when trying to write multiple coils - `host.write_multiple_coils()`
Issue -
State: closed - Opened by beyonlo over 1 year ago
- 7 comments
Labels: bug
#21 - Bug: incorrect return when write a COIL with `1` or `True`
Issue -
State: closed - Opened by beyonlo over 1 year ago
- 10 comments
Labels: bug
#20 - Push release candidate tag on every test deploy
Issue -
State: closed - Opened by brainelectronics over 1 year ago
Labels: internal, CICD
#19 - Enable auto deploy
Pull Request -
State: closed - Opened by brainelectronics over 1 year ago
Labels: enhancement
#18 - Add improvements of GimmickNG
Issue -
State: closed - Opened by brainelectronics over 1 year ago
- 2 comments
Labels: enhancement
#17 - ModbusRTU Client pin usage on STM32
Issue -
State: closed - Opened by osorioen over 1 year ago
- 4 comments
Labels: documentation, question, client
#16 - Create test framework
Issue -
State: closed - Opened by brainelectronics almost 2 years ago
- 4 comments
Labels: documentation, enhancement, help wanted
#15 - Question: how to use the write_single_coil() to write on the different positions?
Issue -
State: closed - Opened by beyonlo almost 2 years ago
- 3 comments
Labels: documentation, client
#14 - Enable coil set value 0 and 1 instead of 0x0000 and 0xFF00
Issue -
State: closed - Opened by brainelectronics almost 2 years ago
Labels: bug
#13 - Do not use default values during setup registers by default
Issue -
State: closed - Opened by brainelectronics almost 2 years ago
Labels: bug
#12 - Coil quantity specification does not work
Issue -
State: closed - Opened by brainelectronics almost 2 years ago
- 7 comments
Labels: bug
#11 - Lib only allows one TCP connection at a time
Issue -
State: open - Opened by brainelectronics almost 2 years ago
- 4 comments
Labels: bug, host
#10 - Improve docs and add examples
Pull Request -
State: closed - Opened by brainelectronics almost 2 years ago
- 29 comments
#9 - Could you please to provide a simple Slave/Master TCP example that works?
Issue -
State: closed - Opened by beyonlo about 2 years ago
- 7 comments
Labels: documentation, help wanted
#8 - Example do not works: ModbusRTUMaster and ModbusTCPMaster class do not exists.
Issue -
State: closed - Opened by beyonlo about 2 years ago
- 1 comment
#7 - Does it work on Raspberry PI Pico?
Issue -
State: open - Opened by Lyansun about 2 years ago
- 33 comments
Labels: documentation, question
#6 - Use correct license
Pull Request -
State: closed - Opened by brainelectronics about 2 years ago
#5 - Great work! Do you have uasyncio/non-blocking feature in the roadmap?
Issue -
State: open - Opened by beyonlo about 2 years ago
- 10 comments
#4 - License
Issue -
State: closed - Opened by GimmickNG about 2 years ago
- 2 comments
#3 - Create upip lib
Pull Request -
State: closed - Opened by brainelectronics over 2 years ago
#2 - Reduce to simple upython lib
Pull Request -
State: closed - Opened by brainelectronics over 2 years ago
#1 - Convert helpers to a micropython modules repo
Pull Request -
State: closed - Opened by brainelectronics over 2 years ago