Ecosyste.ms: Issues

An open API service for providing issue and pull request metadata for open source projects.

GitHub / attify/firmware-analysis-toolkit issues and pull requests

#98 - Sasquatch issues

Issue - State: closed - Opened by khaoticdude 27 days ago

#97 - Ubi Reader no longer has a setup.py

Issue - State: closed - Opened by khaoticdude about 2 months ago

#95 - No IP show while emulating Tp-Link Archer AX50

Issue - State: open - Opened by y198nt 7 months ago - 3 comments

#94 - [help wanted] Cant ping from the Emulated to client

Issue - State: closed - Opened by AnduinBrian 11 months ago - 3 comments

#92 - ./setup.sh failed to execute

Issue - State: open - Opened by Jonty16117 over 1 year ago - 2 comments

#91 - error while boot with a new kernel file

Issue - State: open - Opened by y198nt over 1 year ago

#90 - did not get past idenitifying architecture

Issue - State: open - Opened by boostinkys1000 over 1 year ago

#89 - EXT2-fs error (device sda1)

Issue - State: open - Opened by 3826546 over 1 year ago - 2 comments

#88 - Error while extracting RAX30 firmware

Issue - State: open - Opened by y198nt over 1 year ago - 12 comments

#87 - fat.py and permission error

Issue - State: closed - Opened by torabi12 almost 2 years ago - 4 comments

#86 - Mounting var to jffs2. [FAILED]

Issue - State: closed - Opened by richprice36 almost 2 years ago - 1 comment

#85 - [ 210.320000] firmadyne: ioctl: 0x4

Issue - State: open - Opened by Abib-web almost 2 years ago - 2 comments

#83 - Given No IP

Issue - State: closed - Opened by yhsnihao almost 2 years ago - 4 comments

#82 - Upstream - Firmadyne: 'warning: fgrep is obsolescent; using grep -F'

Issue - State: closed - Opened by ddorando almost 2 years ago - 2 comments

#80 - Check whether lsb-core needs to be downloaded

Pull Request - State: closed - Opened by ddorando almost 2 years ago - 1 comment

#79 - no route to host

Issue - State: closed - Opened by azraelxuemo about 2 years ago - 2 comments

#78 - Can't install FAT

Issue - State: closed - Opened by asabhish about 2 years ago - 2 comments

#77 - Update reset.py to unmount file system

Pull Request - State: open - Opened by Feehley about 2 years ago

#76 - adding configurations for clean archlinux install in README.md

Pull Request - State: open - Opened by Seew0 about 2 years ago - 1 comment

#75 - setup.sh fails on fresh kali install due to lsb-core package missing on OS

Issue - State: open - Opened by ddorando about 2 years ago - 4 comments

#74 - Location of dependency file has changed breaking setup script.

Issue - State: closed - Opened by giffordiij about 2 years ago - 1 comment

#73 - The browser page appears blank

Issue - State: closed - Opened by Loora1N about 2 years ago - 2 comments

#72 - This error occurred when running the firmware!

Issue - State: open - Opened by chinahuhonglue about 2 years ago - 3 comments

#71 - invaild start byte error.

Issue - State: open - Opened by dhje0ng over 2 years ago - 3 comments

#71 - invaild start byte error.

Issue - State: open - Opened by dhje0ng over 2 years ago - 3 comments

#70 - There is an error in the network interface assignment.

Issue - State: open - Opened by dhje0ng over 2 years ago - 4 comments

#69 - install dependencies required by firmadyne

Pull Request - State: closed - Opened by mihaipopescu over 3 years ago - 1 comment

#68 - Image Extraction Failed. Trying to Emulate Sample Arduino bin File

Issue - State: closed - Opened by tjhasan over 3 years ago - 3 comments

#66 - Who can help me?

Issue - State: open - Opened by So4ms over 3 years ago - 8 comments

#65 - No route to host

Issue - State: open - Opened by blackndoor over 3 years ago - 1 comment

#64 - Skip binwalk install prompt

Pull Request - State: closed - Opened by decidedlygray over 3 years ago - 1 comment

#63 - Updated dependencies

Pull Request - State: open - Opened by decidedlygray over 3 years ago - 1 comment

#62 - pexpect.exceptions.EOF: End Of File (EOF). Exception style platform.

Issue - State: open - Opened by terorr over 3 years ago - 12 comments

#61 - Python-pip is not able to be installed

Issue - State: closed - Opened by h2th3k over 3 years ago - 1 comment

#60 - Problem trying connecting to HTTP server in TP-Link TL-WR940N v6

Issue - State: closed - Opened by tati1454 about 4 years ago - 14 comments

#59 - Trying to emulate IP cameras

Issue - State: open - Opened by josephKhoury95 about 4 years ago - 4 comments

#58 - Fail to emulate TL-WR940N

Issue - State: open - Opened by zr950624 about 4 years ago - 2 comments

#57 - Setting up the network connection error

Issue - State: open - Opened by godwei123 about 4 years ago

#56 - "python-pip candidate not available" error while installing.

Issue - State: open - Opened by shaaa9 about 4 years ago - 2 comments

#55 - Missing Jefferson dependecies after install

Issue - State: open - Opened by csenger18 about 4 years ago - 1 comment

#54 - cant access IP adress through browser

Issue - State: open - Opened by naveen66611 about 4 years ago - 1 comment

#53 - Some improvements

Pull Request - State: open - Opened by brianpow about 4 years ago - 1 comment

#52 - remove 1000 images limit

Pull Request - State: closed - Opened by brianpow about 4 years ago

#51 - Installation script running on Ubuntu 20.04 has some issues with the packages

Issue - State: open - Opened by ghost over 4 years ago - 1 comment

#50 - Image extraction failed

Issue - State: closed - Opened by CaledoniaProject over 4 years ago - 8 comments

#49 - can't emulate an "armel" firmware

Issue - State: open - Opened by jackulder over 4 years ago - 7 comments

#48 - Error in pexpect timeout

Pull Request - State: closed - Opened by liberatorqjw over 4 years ago - 1 comment

#47 - Cannot access interface through assigned IP address

Issue - State: open - Opened by Khanejo over 4 years ago - 1 comment

#46 - Doesn't give an Network IP

Issue - State: open - Opened by kolet over 4 years ago - 1 comment

#45 - [question] How can I run this firmwares?

Issue - State: closed - Opened by kismp123 over 4 years ago - 3 comments

#44 - Image extraction failed

Issue - State: closed - Opened by kismp123 over 4 years ago - 5 comments

#42 - do you think that changing the mac address while emulating possible?

Issue - State: closed - Opened by minanagehsalalma over 4 years ago - 2 comments

#41 - expecting for password

Issue - State: closed - Opened by paramikoooo over 4 years ago - 2 comments

#40 - Can't found 1.tar.gz

Issue - State: closed - Opened by zu1k almost 5 years ago

#39 - Can not simulate netgear in the firmadyne

Issue - State: open - Opened by d3viluke almost 5 years ago

#38 - Duplicate ID 'net0' for netdev

Issue - State: closed - Opened by zu1k almost 5 years ago - 2 comments

#37 - how to use gdb in FAT

Issue - State: open - Opened by sssyyynnngithub almost 5 years ago - 1 comment

#36 - no IPv6 routers present

Issue - State: open - Opened by syhxsqqZM about 5 years ago

#35 - qemu-system-mips: Invalid parameter 'vlan'

Issue - State: closed - Opened by XT19958 about 5 years ago - 2 comments

#34 - can't run fat to ananlysis firmware

Issue - State: open - Opened by owenbill about 5 years ago - 1 comment

#33 - Error running fat.py with openwrt firmware

Issue - State: open - Opened by fIappy about 5 years ago - 1 comment

#32 - what is AttifyOS's password?

Issue - State: closed - Opened by fIappy over 5 years ago - 3 comments

#30 - Clear-text password in script

Issue - State: open - Opened by alessandroZelli over 5 years ago - 3 comments

#29 - Not working with Qemu 3.X

Issue - State: closed - Opened by amirdaly almost 6 years ago - 1 comment

#28 - When building the qemu image, there will be a timeout

Issue - State: open - Opened by DerZc almost 6 years ago - 9 comments

#27 - ./images/1.tar.gz: Cannot open: No such file or directory

Issue - State: open - Opened by flerpadoo almost 6 years ago - 5 comments

#26 - Error running fat.py with Netgear R9000 firmware

Issue - State: open - Opened by greg5678 almost 6 years ago - 1 comment

#25 - Architecture : Could not find 'firmadyne.config'!

Issue - State: open - Opened by Dwijad almost 6 years ago - 9 comments

#24 - The command was not found or was not executable: sudo

Issue - State: closed - Opened by Dwijad almost 6 years ago - 2 comments

#23 - Unable to execute the execute extractor.py

Issue - State: open - Opened by Minyanaing about 6 years ago - 1 comment

#22 - Failed on Architecture Step

Issue - State: closed - Opened by jocko96b about 6 years ago - 4 comments

#21 - Netgear firmware unable to simulate in the firmadyne

Issue - State: open - Opened by susantaroy2002 over 6 years ago - 7 comments

#20 - Read wlan sta info failed!

Issue - State: closed - Opened by ZanderChang over 6 years ago - 2 comments

#19 - Architecture : line 7: FIRMWARE_DIR: unbound variable

Issue - State: closed - Opened by ZanderChang over 6 years ago - 1 comment

#18 - Architecture : ./images/1.tar.gz: Cannot open: No such file or directory

Issue - State: closed - Opened by ning1022 over 6 years ago - 3 comments

#17 - Network interface not working and no IP assigned.

Issue - State: open - Opened by r00tb3 over 6 years ago - 12 comments

#16 - pexpect tripping during extraction

Issue - State: open - Opened by jkbecker over 6 years ago - 4 comments

#15 - Error:Traceback.

Issue - State: closed - Opened by r00tb3 over 6 years ago - 14 comments

#14 - Huawei Firmware Extraction

Issue - State: closed - Opened by alivelimeli almost 7 years ago - 2 comments

#13 - pexpect.exceptions.EOF

Issue - State: closed - Opened by tohaikmeng almost 7 years ago - 3 comments

#12 - Emulation run fail

Issue - State: closed - Opened by juushya almost 7 years ago - 6 comments

#11 - ssh port is not open after emulating firmware using fat.py

Issue - State: closed - Opened by ghost about 7 years ago - 2 comments

#10 - firmware not emulating

Issue - State: closed - Opened by HacKeD0x90 about 7 years ago - 1 comment

#9 - Not working on ubuntu 17.04

Issue - State: closed - Opened by Rumata888 over 7 years ago - 3 comments

#8 - firmware-mod-kit instructions

Issue - State: open - Opened by blischalk over 7 years ago

#7 - Can you help in this error

Issue - State: closed - Opened by ghost over 7 years ago - 3 comments

#6 - Unable to emulate repacked firmware(using firmware mod kit) on fat

Issue - State: closed - Opened by nitmalviya03 over 7 years ago - 3 comments

#5 - Error : Brand doesn't exist

Issue - State: closed - Opened by Murthysagi over 7 years ago - 2 comments

#4 - FAT issue

Issue - State: closed - Opened by ankushgoel27 almost 8 years ago - 9 comments

#3 - Incomplete link for firmware-mod-kit installation.

Issue - State: closed - Opened by uday-infosec almost 8 years ago

#2 - Firmware-mod-kit issues under Kali : Failed while building

Issue - State: closed - Opened by pabb85 almost 8 years ago - 2 comments

#1 - Firmware not emulating or showing on network after running

Issue - State: closed - Opened by pabb85 about 8 years ago - 41 comments