Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / adafruit/seesaw issues and pull requests
#79 - seesaw does not work for ano example on the learn website
Issue -
State: open - Opened by MysticNynja 15 days ago
#78 - use Encoder with TCC timer
Issue -
State: open - Opened by mquerostudio 3 months ago
#77 - Question - Not an Issue - Encoder Button and NeoPixel GPIO Pins
Issue -
State: closed - Opened by LelandSindt 4 months ago
- 1 comment
#76 - Building crickitHat with DEBUG=1 does work
Issue -
State: open - Opened by miltieIV2 5 months ago
#76 - Building crickitHat with DEBUG=1 does work
Issue -
State: open - Opened by miltieIV2 5 months ago
#75 - The README.md and Makefile are missing instructions to create the .UF2 artifact
Issue -
State: open - Opened by miltieIV2 5 months ago
#74 - Error building with latest toolchain Arm GNU Toolchain 13.2.rel1 (Build arm-13.7)) 13.2.1 20231009
Issue -
State: open - Opened by miltieIV2 5 months ago
#73 - Implement GPIO TOGGLE
Pull Request -
State: open - Opened by suurkivi 6 months ago
#72 - Add instructions for building with docker
Pull Request -
State: open - Opened by suurkivi 7 months ago
#71 - RFC: Support for a shared IRQ line
Issue -
State: open - Opened by CraigBurden 8 months ago
#70 - reading encoder position after reading switch state fail, looks like an overrun
Issue -
State: open - Opened by Ralfonso09 10 months ago
#69 - Have to read the version two times
Issue -
State: open - Opened by Ralfonso09 10 months ago
#67 - Configuration file cleanup
Pull Request -
State: open - Opened by mousethief over 1 year ago
#66 - getEncoderDelta returns positve value in each direction
Issue -
State: closed - Opened by matthewepler over 1 year ago
- 1 comment
#65 - unclear documentation for getEncoderDelta
Issue -
State: closed - Opened by matthewepler over 1 year ago
- 1 comment
#64 - Update build.yml to ubuntu-latest
Pull Request -
State: closed - Opened by dhalbert over 1 year ago
#63 - Removed some duplicate defs
Pull Request -
State: closed - Opened by mousethief over 1 year ago
#62 - Negative Motor Throttle Values Not Working
Issue -
State: closed - Opened by aryker almost 2 years ago
- 2 comments
#61 - No support for encoders with different pulses per detent
Issue -
State: open - Opened by joelspadin almost 2 years ago
#60 - Adafruit I2C rotary encoder (product 4991)
Issue -
State: closed - Opened by el-samiyel about 2 years ago
- 1 comment
#59 - Support for high-frequency PWM output (8-bit mode) for SAMD09
Issue -
State: open - Opened by evtimDev about 2 years ago
- 4 comments
#58 - Enable link-time optimization for reduced code-size
Pull Request -
State: open - Opened by evtimDev about 2 years ago
- 5 comments
#57 - setPWMFreq() not working
Issue -
State: closed - Opened by evtimmy over 2 years ago
- 1 comment
#56 - Do not re-enable the timer when the user request a PWM frequency of 0.
Pull Request -
State: open - Opened by mkende over 2 years ago
#55 - Can’t stop a PWM output on a SAMD10 chip
Issue -
State: open - Opened by mkende over 2 years ago
#53 - I2C Documentation
Issue -
State: closed - Opened by BleuLlama over 3 years ago
- 2 comments
#52 - Encoder increments in the wrong direction CW decrements CCW increments
Issue -
State: closed - Opened by wifijt over 3 years ago
- 3 comments
#51 - Encoder can lose counts
Issue -
State: open - Opened by jepler over 3 years ago
- 3 comments
#50 - fix up final encoder/neokey pinouts
Pull Request -
State: closed - Opened by ladyada over 3 years ago
#49 - Rotary qt
Pull Request -
State: closed - Opened by ladyada over 3 years ago
#48 - fix addr math, avoid hard faulting on a edge condition of irq
Pull Request -
State: closed - Opened by ladyada over 3 years ago
#47 - Neokey qt
Pull Request -
State: closed - Opened by ladyada over 3 years ago
#46 - GPIO TOGGLE not implemented
Issue -
State: open - Opened by eugeneanikin over 3 years ago
- 1 comment
#45 - Change NMI handler to match PR#39
Pull Request -
State: closed - Opened by eugeneanikin over 3 years ago
- 3 comments
#44 - NMI_Handler in qxk_port.S is not invoked after PR#39 causing a hang in I2c transactions
Issue -
State: closed - Opened by eugeneanikin over 3 years ago
- 3 comments
#43 - Add more firmware version info
Issue -
State: open - Opened by chatelao over 3 years ago
#42 - Change initialization to stop warning from occurring
Pull Request -
State: closed - Opened by Maeur1 almost 4 years ago
- 1 comment
#41 - Seesaw UART messing with RPi serial0 UART.
Issue -
State: closed - Opened by jgoergen almost 4 years ago
- 3 comments
#40 - Updating QP Framework
Issue -
State: closed - Opened by wallarug over 4 years ago
- 7 comments
#39 - Update of lib/samdXX folders
Pull Request -
State: closed - Opened by wallarug over 4 years ago
- 1 comment
#38 - Update CMSIS to Version 5.6.0
Pull Request -
State: open - Opened by wallarug over 4 years ago
- 1 comment
#37 - Cmsis update
Pull Request -
State: closed - Opened by wallarug over 4 years ago
- 1 comment
#36 - NVIC_Enable() not working for D51
Issue -
State: closed - Opened by wallarug over 4 years ago
- 10 comments
#35 - NVIC_SetPriority and IRQ
Issue -
State: open - Opened by wallarug over 4 years ago
- 9 comments
#34 - Is the SAMD10 tested with Neopixels?
Issue -
State: closed - Opened by john-- over 4 years ago
- 3 comments
#33 - Convert from travis CI to github actions
Pull Request -
State: closed - Opened by jepler over 4 years ago
- 2 comments
#32 - fully delete link to legacy python library
Pull Request -
State: closed - Opened by jepler almost 5 years ago
#31 - Point users towards preferred library for Python
Pull Request -
State: closed - Opened by jepler almost 5 years ago
- 1 comment
#30 - Update README with Ubuntu 18.04 build setup
Pull Request -
State: closed - Opened by jhh almost 5 years ago
#29 - Build failing with rom,ram overflow on Ubuntu 18.04
Issue -
State: closed - Opened by jhh almost 5 years ago
- 3 comments
#28 - All 12 timers need to be defined for SAMD21
Issue -
State: open - Opened by wallarug about 5 years ago
- 1 comment
#27 - SAMD51 Support
Issue -
State: open - Opened by wallarug about 5 years ago
- 1 comment
#26 - Add basic Travis build check.
Pull Request -
State: closed - Opened by caternuson about 5 years ago
- 2 comments
#25 - Add Travis CI?
Issue -
State: closed - Opened by caternuson about 5 years ago
- 5 comments
#24 - Fix return type for NeopixelSetBufferLengthReq::getLen()
Pull Request -
State: closed - Opened by caternuson about 5 years ago
#23 - PulseIn Support
Issue -
State: open - Opened by wallarug over 5 years ago
- 2 comments
Labels: enhancement
#22 - Digital Write for All Pins
Issue -
State: open - Opened by wallarug over 5 years ago
- 1 comment
Labels: enhancement
#21 - Enable TCCs for Function Block E (4)
Pull Request -
State: open - Opened by wallarug over 5 years ago
#20 - board_config.h ignored for PA08 and PA09
Issue -
State: closed - Opened by wallarug over 5 years ago
- 1 comment
#19 - added robohatmm1 board defs.
Pull Request -
State: closed - Opened by wallarug over 5 years ago
- 4 comments
#18 - Buffered/latched mode for buttons
Issue -
State: open - Opened by deshipu over 5 years ago
- 3 comments
#17 - using TCC1 on SeeSaw
Issue -
State: open - Opened by wallarug over 5 years ago
- 4 comments
#16 - ENABLE_LOGGING - build failed.
Issue -
State: closed - Opened by wallarug over 5 years ago
- 2 comments
#15 - OSError: [Errno 5] Input/output error
Issue -
State: closed - Opened by wallarug over 5 years ago
- 2 comments
#14 - Update Neopixel.cpp
Pull Request -
State: closed - Opened by SConaway over 5 years ago
- 1 comment
#13 - Update README.md
Pull Request -
State: closed - Opened by SConaway over 5 years ago
- 1 comment
#12 - Would it be possible to have the SeeSaw board with the sleep mode?
Issue -
State: open - Opened by pierrot10 almost 6 years ago
- 3 comments
#11 - Help getting uf2 file
Issue -
State: closed - Opened by kstisser about 6 years ago
- 9 comments
#10 - Dm keypad
Pull Request -
State: closed - Opened by deanm1278 about 6 years ago
#9 - USB <-> UART, DMA, and SPI Slave modules
Pull Request -
State: closed - Opened by deanm1278 about 6 years ago
#8 - Servo motor doesn't go to 0
Issue -
State: closed - Opened by danowall over 6 years ago
- 4 comments
#7 - Build fails - missing build_date.h
Issue -
State: closed - Opened by jerryneedell over 6 years ago
- 10 comments
#6 - Crickit - add red NeoPixel blink when power supply is > 5.5V or < 3.5V
Issue -
State: closed - Opened by ladyada over 6 years ago
- 6 comments
#5 - Inconsistent Seesaw license
Issue -
State: closed - Opened by simonlbn over 6 years ago
- 2 comments
#4 - setPWMFreq() unresponsive.
Issue -
State: closed - Opened by wa1tnr over 6 years ago
- 4 comments
#3 - I2C Bootloader for firmware updates
Issue -
State: open - Opened by jgilbert20 almost 7 years ago
- 2 comments
#2 - Building on Unix?
Issue -
State: closed - Opened by timonsku almost 7 years ago
- 4 comments
#1 - Any plans for a C/C++ RPi interface?
Issue -
State: closed - Opened by timonsku almost 7 years ago
- 1 comment