adafruit/DHT-sensor-library issues and pull requests

#100 - 'dht' does not name a type

Issue - State: closed - Opened by ghost over 6 years ago - 2 comments

#99 - FreeRTOS problem with DHT22

Issue - State: closed - Opened by MNABEELTAHIR over 6 years ago

#98 - DHT11 is NOT able to read data with Arduino Pro Mini, 3.3V 8MHz.

Issue - State: closed - Opened by jyotirajsharma over 6 years ago - 9 comments

#98 - DHT11 is NOT able to read data with Arduino Pro Mini, 3.3V 8MHz.

Issue - State: closed - Opened by jyotirajsharma over 6 years ago - 9 comments

#97 - Async

Pull Request - State: open - Opened by nos86 over 6 years ago

#96 - PN532 Library Does NOt Work

Issue - State: closed - Opened by bi1012037 over 6 years ago

#95 - Add support for DHT12.

Pull Request - State: closed - Opened by fanthos almost 7 years ago

#94 - ESP8266 and DHT22: NAN errors using libraries >= 1.2.0

Issue - State: closed - Opened by robcazzaro almost 7 years ago - 41 comments

#93 - Use micros() instead of cycle counting.

Pull Request - State: open - Opened by rtwfroody almost 7 years ago - 4 comments

#93 - Use micros() instead of cycle counting.

Pull Request - State: open - Opened by rtwfroody almost 7 years ago - 4 comments

#92 - ESP8266 NodeMCU (ESP12E Module) wont work

Issue - State: closed - Opened by addisonrudd almost 7 years ago

#91 - Fix for slower boards. Use uint16_t in expectPulse loop to increase sampling rate

Pull Request - State: closed - Opened by chelmi almost 7 years ago - 2 comments

#91 - Fix for slower boards. Use uint16_t in expectPulse loop to increase sampling rate

Pull Request - State: closed - Opened by chelmi almost 7 years ago - 2 comments

#90 - Fatal Error

Issue - State: closed - Opened by TheGreyDiamond almost 7 years ago - 1 comment

#90 - Fatal Error

Issue - State: closed - Opened by TheGreyDiamond almost 7 years ago - 1 comment

#89 - Update DHT.h

Pull Request - State: closed - Opened by ManjunathRN almost 7 years ago - 1 comment

#88 - Fluctuating load cell reading with HX711

Issue - State: closed - Opened by Koktung almost 7 years ago - 1 comment

#87 - Fix api inconsistency about temperature units

Pull Request - State: open - Opened by anxolerd almost 7 years ago - 1 comment

#86 - Fatal error: DHT.h: No such file or directory

Issue - State: closed - Opened by FlorentSms almost 7 years ago - 12 comments

#85 - DHT read humidity/temperature makes built in led blink

Issue - State: closed - Opened by kreintjes about 7 years ago - 6 comments

#84 - Error reading temperature / humidity

Issue - State: closed - Opened by jaderarmanhi about 7 years ago - 2 comments

#83 - Support for the new DHT12

Issue - State: closed - Opened by nielstron about 7 years ago - 3 comments

#82 - Fixes #81 Distinguish "signal already there" from "timeout"

Pull Request - State: closed - Opened by adams13x13 about 7 years ago - 1 comment

#81 - Result of DHT::expectPulse is the same on timeout and if the level is already there

Issue - State: closed - Opened by adams13x13 about 7 years ago

#81 - Result of DHT::expectPulse is the same on timeout and if the level is already there

Issue - State: closed - Opened by adams13x13 about 7 years ago

#80 - where the interrups is turn on again??

Issue - State: closed - Opened by lagg070988 about 7 years ago

#80 - where the interrups is turn on again??

Issue - State: closed - Opened by lagg070988 about 7 years ago

#79 - DHT11 is not reading Temperature and Humidity when Arduino is powered on using DC power Supply (12V)

Issue - State: closed - Opened by jyotirajsharma about 7 years ago - 5 comments

#79 - DHT11 is not reading Temperature and Humidity when Arduino is powered on using DC power Supply (12V)

Issue - State: closed - Opened by jyotirajsharma about 7 years ago - 5 comments

#78 - add begin() with device type, so device type can be set in SETUP() after being read from a config source

Pull Request - State: open - Opened by species5618 over 7 years ago

#77 - use more than one DHT sensor

Issue - State: closed - Opened by notsolowki over 7 years ago - 4 comments

#77 - use more than one DHT sensor

Issue - State: closed - Opened by notsolowki over 7 years ago - 4 comments

#76 - Modified read speed

Pull Request - State: closed - Opened by terryjmyers over 7 years ago - 1 comment

#76 - Modified read speed

Pull Request - State: closed - Opened by terryjmyers over 7 years ago - 1 comment

#75 - Not working at all on ProMini @ 8MHz

Issue - State: closed - Opened by kratochviljan over 7 years ago - 5 comments

#75 - Not working at all on ProMini @ 8MHz

Issue - State: closed - Opened by kratochviljan over 7 years ago - 5 comments

#74 - bugfix - make "force=true" work for readHumidity also as hinted by the code

Pull Request - State: closed - Opened by lpaseen over 7 years ago - 1 comment

#74 - bugfix - make "force=true" work for readHumidity also as hinted by the code

Pull Request - State: closed - Opened by lpaseen over 7 years ago - 1 comment

#73 - RedBear_Duo with DHT AM2302

Issue - State: closed - Opened by jadeye over 7 years ago - 12 comments

#73 - RedBear_Duo with DHT AM2302

Issue - State: closed - Opened by jadeye over 7 years ago - 12 comments

#72 - Include <Adafruit_Sensor.h> error

Issue - State: closed - Opened by good-vi over 7 years ago - 9 comments

#72 - Include <Adafruit_Sensor.h> error

Issue - State: closed - Opened by good-vi over 7 years ago - 9 comments

#71 - ESP8266 NodeMCU (ESP12E Module) don't work

Issue - State: closed - Opened by Jcfurtado over 7 years ago - 6 comments

#71 - ESP8266 NodeMCU (ESP12E Module) don't work

Issue - State: closed - Opened by Jcfurtado over 7 years ago - 6 comments

#70 - Start listening to the sensor right after releasing the start signal …

Pull Request - State: open - Opened by khjoen over 7 years ago

#70 - Start listening to the sensor right after releasing the start signal …

Pull Request - State: open - Opened by khjoen over 7 years ago

#69 - Release 1.3.0 don't work for ESP8266

Issue - State: closed - Opened by DaniloFeng over 7 years ago - 4 comments

#69 - Release 1.3.0 don't work for ESP8266

Issue - State: closed - Opened by DaniloFeng over 7 years ago - 4 comments

#68 - dht11 library file issue

Issue - State: closed - Opened by rishukumaragrahari over 7 years ago - 2 comments

#68 - dht11 library file issue

Issue - State: closed - Opened by rishukumaragrahari over 7 years ago - 2 comments

#67 - I'm not sure if this is an issue or not, but I cannot get more than 9 DHT 11 sensors to work. I'm using a Yun shield on a Mega2560 and have 9 DHT11's on pins 23-31 and they work just fine. When I add a 10th sensor, that sensor behaves very erratically. I've tried different pins, 32, 33, 38 etc. and I've tried different sensors. Is there anything in the library that might impose such a limit?

Issue - State: closed - Opened by kenbpeck almost 8 years ago - 1 comment

#67 - I'm not sure if this is an issue or not, but I cannot get more than 9 DHT 11 sensors to work. I'm using a Yun shield on a Mega2560 and have 9 DHT11's on pins 23-31 and they work just fine. When I add a 10th sensor, that sensor behaves very erratically. I've tried different pins, 32, 33, 38 etc. and I've tried different sensors. Is there anything in the library that might impose such a limit?

Issue - State: closed - Opened by kenbpeck almost 8 years ago - 1 comment

#66 - DHTtester.ino not compiling

Issue - State: closed - Opened by johnDorian almost 8 years ago - 1 comment

#66 - DHTtester.ino not compiling

Issue - State: closed - Opened by johnDorian almost 8 years ago - 1 comment

#65 - Cannot measure below 1 deg celcius. Sensor or code?

Issue - State: closed - Opened by nitech almost 8 years ago - 11 comments

#65 - Cannot measure below 1 deg celcius. Sensor or code?

Issue - State: closed - Opened by nitech almost 8 years ago - 11 comments

#64 - Duplicate unified files

Issue - State: closed - Opened by simonvanderveldt almost 8 years ago - 1 comment

#64 - Duplicate unified files

Issue - State: closed - Opened by simonvanderveldt almost 8 years ago - 1 comment

#63 - Update Project Description

Issue - State: closed - Opened by drasive almost 8 years ago - 1 comment

#62 - DHT Library 1.3.0 Does NOt Work

Issue - State: closed - Opened by sghazagh almost 8 years ago - 31 comments

#62 - DHT Library 1.3.0 Does NOt Work

Issue - State: closed - Opened by sghazagh almost 8 years ago - 31 comments

#61 - Save 66 bytes by using integer arithmetric

Pull Request - State: closed - Opened by 7eggert about 8 years ago

#61 - Save 66 bytes by using integer arithmetric

Pull Request - State: closed - Opened by 7eggert about 8 years ago

#60 - missing force in readHumidity

Issue - State: closed - Opened by skvalen about 8 years ago - 2 comments

#60 - missing force in readHumidity

Issue - State: closed - Opened by skvalen about 8 years ago - 2 comments

#59 - Wrong values (overflow)

Pull Request - State: closed - Opened by andreaci over 8 years ago - 2 comments

#59 - Wrong values (overflow)

Pull Request - State: closed - Opened by andreaci over 8 years ago - 2 comments

#58 - Scheduler task, stackoverflow problem

Issue - State: closed - Opened by hisar2626 over 8 years ago

#58 - Scheduler task, stackoverflow problem

Issue - State: closed - Opened by hisar2626 over 8 years ago

#57 - nan values, and strange fluctuations pattern.

Issue - State: closed - Opened by stex2005 over 8 years ago - 40 comments

#57 - nan values, and strange fluctuations pattern.

Issue - State: closed - Opened by stex2005 over 8 years ago - 40 comments

#56 - Make "force" work with readHumidity

Pull Request - State: closed - Opened by dotdoom over 8 years ago - 7 comments

#56 - Make "force" work with readHumidity

Pull Request - State: closed - Opened by dotdoom over 8 years ago - 7 comments

#55 - Support for Arduion Library Manager

Issue - State: closed - Opened by 2tata over 8 years ago - 1 comment

#54 - Added Convenience Methods

Pull Request - State: open - Opened by greggubben over 8 years ago

#54 - Added Convenience Methods

Pull Request - State: open - Opened by greggubben over 8 years ago

#53 - Error: 'microsecondsToClockCycles' was not declared in this scope

Issue - State: closed - Opened by ramonmata over 8 years ago - 4 comments

#53 - Error: 'microsecondsToClockCycles' was not declared in this scope

Issue - State: closed - Opened by ramonmata over 8 years ago - 4 comments

#52 - Use MIN_INTERVAL define instead of hardcoded value

Pull Request - State: closed - Opened by Spacefish over 8 years ago

#52 - Use MIN_INTERVAL define instead of hardcoded value

Pull Request - State: closed - Opened by Spacefish over 8 years ago

#51 - Removed "End the start signal by setting data line high for 40 micros…

Pull Request - State: closed - Opened by krzychb almost 9 years ago

#51 - Removed "End the start signal by setting data line high for 40 micros…

Pull Request - State: closed - Opened by krzychb almost 9 years ago

#50 - DHT with esp8266/arduino 2.0.0 stable random blocks

Issue - State: closed - Opened by asetyde almost 9 years ago - 6 comments

#50 - DHT with esp8266/arduino 2.0.0 stable random blocks

Issue - State: closed - Opened by asetyde almost 9 years ago - 6 comments

#49 - DHTServer:65: error: 'gettemperature' was not declared in this scope

Issue - State: closed - Opened by mikejclark almost 9 years ago - 5 comments

#48 - DHT init sequence wrong

Issue - State: closed - Opened by W-E almost 9 years ago - 36 comments

#48 - DHT init sequence wrong

Issue - State: closed - Opened by W-E almost 9 years ago - 36 comments

#47 - update dht.cpp. mod readHumidity().

Pull Request - State: closed - Opened by jongho123 almost 9 years ago - 2 comments

#47 - update dht.cpp. mod readHumidity().

Pull Request - State: closed - Opened by jongho123 almost 9 years ago - 2 comments

#46 - unused parameter 'force' in readHumidity()

Issue - State: closed - Opened by jongho123 almost 9 years ago - 1 comment

#46 - unused parameter 'force' in readHumidity()

Issue - State: closed - Opened by jongho123 almost 9 years ago - 1 comment

#45 - ESP8266 sqrt

Issue - State: closed - Opened by asetyde almost 9 years ago - 3 comments

#44 - Problem during compilation in Arduino DUE board

Issue - State: closed - Opened by CharlyBote almost 9 years ago - 2 comments

#43 - Add more information to sensor types and rename readme file

Pull Request - State: closed - Opened by hecko almost 9 years ago - 1 comment

#42 - Divisions turned into multiplications

Pull Request - State: closed - Opened by jmdana almost 9 years ago - 2 comments

#41 - A more accurate DHT::computeHeatIndex implementation

Pull Request - State: closed - Opened by jmdana almost 9 years ago - 3 comments

#40 - Works with some ESP03's and not with others

Issue - State: closed - Opened by raimohanska about 9 years ago - 8 comments

#39 - Unstable temperature with esp-01

Issue - State: closed - Opened by franc-carter about 9 years ago - 1 comment

#38 - Allow forcing a read and a few fixes

Pull Request - State: closed - Opened by matthijskooijman about 9 years ago - 2 comments

#37 - Release 1.1.0 produces lots of NANs

Issue - State: closed - Opened by sandymac about 9 years ago - 8 comments

GitHub / adafruit/DHT-sensor-library issues and pull requests