Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / YosysHQ/apicula issues and pull requests
#275 - Remove the magic numbers
Pull Request -
State: open - Opened by yrabbit about 1 month ago
#274 - BUGFIX. Fix dat offset.
Pull Request -
State: closed - Opened by yrabbit about 1 month ago
#273 - Initial support for 5A series
Pull Request -
State: open - Opened by AwooOOoo about 1 month ago
#272 - Assign missing time delays
Pull Request -
State: closed - Opened by yrabbit about 1 month ago
#271 - Gowin - tang nano 4K, 9K Yosys generated bitstreams cannot be programmed with Gowin EDA
Issue -
State: closed - Opened by fedor-goncharov about 2 months ago
- 1 comment
#270 - Add delays for primary clocks.
Pull Request -
State: closed - Opened by yrabbit about 2 months ago
#269 - tangprimer20k: Design involving the clock doesn't run on hardware
Issue -
State: open - Opened by Mai-Lapyst about 2 months ago
- 5 comments
#268 - MacOS, Qt5/QtOpenGL issue, no such file
Issue -
State: open - Opened by ReubenkThomas 2 months ago
- 3 comments
#267 - Are BRAMs supported?
Issue -
State: closed - Opened by stacksmith 2 months ago
- 3 comments
#266 - Add wire class info
Pull Request -
State: closed - Opened by yrabbit 2 months ago
#265 - Fix bits to bytes conversion.
Pull Request -
State: closed - Opened by yrabbit 2 months ago
#264 - Tang Nano 9K -- silent failure via sram, CRC error via flash
Issue -
State: closed - Opened by stacksmith 2 months ago
- 2 comments
#263 - HCLK. Primary clock pins
Pull Request -
State: closed - Opened by yrabbit 2 months ago
- 2 comments
#262 - Tang Nano 9K bad checksum when flashing
Issue -
State: closed - Opened by stacksmith 2 months ago
- 42 comments
#261 - Add DHCEN primitive.
Pull Request -
State: open - Opened by yrabbit 2 months ago
- 3 comments
#260 - Add dynamic clock control
Pull Request -
State: closed - Opened by yrabbit 3 months ago
- 4 comments
#259 - Fix regex
Pull Request -
State: closed - Opened by max-kudinov 3 months ago
- 4 comments
#258 - HCLK Support
Pull Request -
State: closed - Opened by Seyviour 3 months ago
- 4 comments
#257 - Implement power saving primitive BANDGAP
Pull Request -
State: closed - Opened by yrabbit 3 months ago
#256 - Fix pROM(X9).
Pull Request -
State: closed - Opened by yrabbit 3 months ago
#255 - Clarification in the doc about BSRAM BLKSEL
Pull Request -
State: closed - Opened by yrabbit 3 months ago
#254 - BSRAM BLKSEL fix
Pull Request -
State: closed - Opened by yrabbit 3 months ago
#253 - Relax BSRAM initialization data requirements
Pull Request -
State: closed - Opened by yrabbit 3 months ago
#252 - BSRAM. Corrective action.
Pull Request -
State: closed - Opened by yrabbit 3 months ago
#251 - Describe the BSRAM regs in GW1NR-9C and GW2AR-18C
Pull Request -
State: closed - Opened by yrabbit 3 months ago
#250 - Fix IO unpack
Pull Request -
State: closed - Opened by yrabbit 3 months ago
#249 - Add description of BSRAM harness
Pull Request -
State: closed - Opened by yrabbit 3 months ago
#248 - Fix CI
Pull Request -
State: closed - Opened by yrabbit 4 months ago
#247 - BUGFIX. Fix BSRAM unpacking.
Pull Request -
State: closed - Opened by yrabbit 4 months ago
#246 - Doc. Brief notes on DSP operation
Pull Request -
State: closed - Opened by yrabbit 4 months ago
- 1 comment
#245 - Notes about DSP
Pull Request -
State: closed - Opened by yrabbit 4 months ago
#244 - Tang Nano 9k: rPLL is not working at all
Issue -
State: closed - Opened by tmssngr 5 months ago
- 6 comments
#243 - Cant find how to compile for tang nano 20k
Issue -
State: closed - Opened by H4-b 5 months ago
- 6 comments
#242 - MULT36x36 not working, but MULT18x18 is working! - DSP Primitive
Issue -
State: closed - Opened by bjoernskau 6 months ago
- 2 comments
#241 - Add PLL pads.
Pull Request -
State: closed - Opened by yrabbit 6 months ago
- 3 comments
#240 - PLL unstable on tec0117
Issue -
State: open - Opened by pepijndevos 6 months ago
- 1 comment
#239 - Implement the DSP primitive.
Pull Request -
State: closed - Opened by yrabbit 6 months ago
- 3 comments
#238 - update yosys CI branches
Pull Request -
State: closed - Opened by pepijndevos 6 months ago
- 1 comment
#237 - Add Functions for Concise Tile Parsing
Pull Request -
State: closed - Opened by Seyviour 6 months ago
- 2 comments
#236 - Add examples with tiny RISCV
Pull Request -
State: closed - Opened by yrabbit 7 months ago
#235 - Optimistic compression approach
Issue -
State: open - Opened by kimstik 7 months ago
- 3 comments
#234 - Examples. Describe the Tangnano4k clock pin.
Pull Request -
State: closed - Opened by yrabbit 8 months ago
- 2 comments
#233 - Update workflows
Pull Request -
State: closed - Opened by mmicko 8 months ago
- 2 comments
#232 - Failed to route net Gowin_rPLL_9Mhz.clkout with nextpnr-himbaechel
Issue -
State: closed - Opened by mitnk 8 months ago
- 11 comments
#231 - Extend SDRAM Documentation to Cover GW2AR-18 Devices
Pull Request -
State: closed - Opened by Seyviour 8 months ago
- 17 comments
#230 - Replace numpy arrays with lists.
Pull Request -
State: closed - Opened by yrabbit 8 months ago
- 6 comments
#229 - bump yosys and nextpnr versions
Pull Request -
State: closed - Opened by pepijndevos 8 months ago
#228 - switch readme to nextpnr-himbaechel
Pull Request -
State: closed - Opened by pepijndevos 8 months ago
- 2 comments
#227 - Add support for four IOLOGICs in one cell
Pull Request -
State: closed - Opened by yrabbit 8 months ago
#226 - Add an example for OSER10 using ELVDS pins
Pull Request -
State: closed - Opened by yrabbit 8 months ago
#225 - gowin_pack hangs on OSER10 - ELVDS_OBUF combo on Tang Nano 9K
Issue -
State: closed - Opened by regymm 8 months ago
- 6 comments
#224 - Move away from numpy
Issue -
State: closed - Opened by pepijndevos 8 months ago
- 7 comments
#223 - Switch crcmod to crc
Pull Request -
State: closed - Opened by pepijndevos 8 months ago
#222 - Properly handle external 9C clock pins
Pull Request -
State: closed - Opened by yrabbit 8 months ago
#221 - Fix #219: Python3.8 compatiblity
Pull Request -
State: closed - Opened by DavidVentura 9 months ago
- 1 comment
#220 - Better documentation for Sipeed nano 20k support
Issue -
State: closed - Opened by siraisisatoru 9 months ago
- 8 comments
#219 - Incompatible with Python 3.8
Issue -
State: closed - Opened by nnn1590 9 months ago
#218 - Doc. Mention SZFPGA (GW1NR-9) board as supported.
Pull Request -
State: closed - Opened by yrabbit 9 months ago
#217 - Please use a crc library that provides a pure Python implementation
Issue -
State: closed - Opened by whitequark 9 months ago
- 5 comments
#216 - szfpga board support
Issue -
State: closed - Opened by tpimh 9 months ago
- 2 comments
#215 - Simple blinky does not work on tangnano9k
Issue -
State: open - Opened by marsohod4you 10 months ago
- 4 comments
#214 - BUGFIX: Use parsed device.
Pull Request -
State: closed - Opened by yrabbit 10 months ago
#213 - gowin_pack fails with "'GW1NR-UV9QN881C6/I5.pickle' must be only a file name"
Issue -
State: closed - Opened by tpimh 10 months ago
- 3 comments
#212 - Refactor dat parser
Pull Request -
State: closed - Opened by DavidVentura 10 months ago
- 5 comments
#211 - CLKDIV support
Issue -
State: closed - Opened by martell 10 months ago
- 13 comments
#210 - Add IDCODE override
Pull Request -
State: open - Opened by jeremyherbert 11 months ago
- 9 comments
#209 - Add 20k devices to readme
Pull Request -
State: closed - Opened by pepijndevos 11 months ago
- 2 comments
#208 - Tang nano 20k support
Issue -
State: closed - Opened by jeremyherbert 11 months ago
- 23 comments
#207 - himbaechel: Add OSER10 TLVDS example.
Pull Request -
State: closed - Opened by yrabbit 11 months ago
#206 - GW1NR-9 vs GW1N-9 bit-stream
Issue -
State: open - Opened by chili-chips-ba 11 months ago
- 12 comments
#205 - A Parser For Vendor Provided .ini Files
Pull Request -
State: closed - Opened by Seyviour 11 months ago
- 4 comments
#204 - GW5A family support
Issue -
State: open - Opened by fduxiao 12 months ago
- 4 comments
#203 - FPGA initialises but doesn't run. Same code works on the vendor tools.
Issue -
State: closed - Opened by hugoferreira 12 months ago
- 9 comments
#202 - Himbaechel. Add initial BSRAM support
Pull Request -
State: closed - Opened by yrabbit 12 months ago
- 3 comments
#201 - Fix build attempt
Pull Request -
State: closed - Opened by davidsiaw almost 1 year ago
- 1 comment
#200 - Question - how to include last commits of apicula in nextpnr
Issue -
State: closed - Opened by laurentiuduca about 1 year ago
- 6 comments
#199 - Himbaechel. Improve dedicated clock router
Pull Request -
State: closed - Opened by yrabbit about 1 year ago
- 7 comments
#198 - Fix simple examples
Pull Request -
State: closed - Opened by yrabbit about 1 year ago
#197 - Modify CI to generate Himbaechel bases, build and test Himbaechel examples
Pull Request -
State: closed - Opened by yrabbit about 1 year ago
#196 - Fix IO attributes and Z-1 PLL
Pull Request -
State: closed - Opened by yrabbit about 1 year ago
- 3 comments
#195 - GW1NZ-1 rPLL (nano 1k) does not synthesize working pll.
Issue -
State: closed - Opened by dirkenstein about 1 year ago
- 7 comments
#194 - Fix OPEN_DRAIN IO attribute
Pull Request -
State: closed - Opened by yrabbit about 1 year ago
#193 - OSCH seems broken
Issue -
State: closed - Opened by whitequark about 1 year ago
- 3 comments
#192 - Install gowin_pll tool
Pull Request -
State: closed - Opened by whitequark about 1 year ago
- 3 comments
#191 - Please export gowin-pll as a script
Issue -
State: closed - Opened by whitequark about 1 year ago
- 1 comment
#190 - update stable CI versions
Pull Request -
State: closed - Opened by pepijndevos about 1 year ago
#189 - python 3.8 support for importlib files api
Pull Request -
State: closed - Opened by david65536 about 1 year ago
- 7 comments
#188 - AttributeError: module 'importlib.resources' has no attribute 'files'
Issue -
State: closed - Opened by marsohod4you about 1 year ago
- 5 comments
#187 - Missing Apycula file when compiling nextpnr_gowin
Issue -
State: closed - Opened by philiprbrenan about 1 year ago
- 5 comments
#186 - Ngi0 reuse
Pull Request -
State: closed - Opened by Jit-p about 1 year ago
- 2 comments
#185 - why you guys so powerful
Issue -
State: open - Opened by quantrpeter about 1 year ago
- 2 comments
#184 - Adapting the packer to the alternative P&R
Pull Request -
State: closed - Opened by yrabbit over 1 year ago
- 10 comments
#183 - use compressed pickle files
Pull Request -
State: closed - Opened by pepijndevos over 1 year ago
- 12 comments
#182 - Increase verbosity when uploading to PyPi
Pull Request -
State: closed - Opened by yrabbit over 1 year ago
#181 - Add support for the GW2A series
Pull Request -
State: closed - Opened by yrabbit over 1 year ago
#180 - nextpnr-gui : terminate called after throwing an instance of 'std::out_of_range'
Issue -
State: open - Opened by philiprbrenan over 1 year ago
- 1 comment
#179 - Fix PLL examples for tangnano4k
Pull Request -
State: closed - Opened by yrabbit over 1 year ago
#178 - adding little helper tool like icepll
Pull Request -
State: closed - Opened by multigcs over 1 year ago
- 4 comments
#177 - Change the IO coding to synthetic
Pull Request -
State: closed - Opened by yrabbit over 1 year ago
- 6 comments
#176 - BUGFIX: DFF and DFFN reset state
Pull Request -
State: closed - Opened by yrabbit over 1 year ago