Klipper3d/klipper issues and pull requests

#6584 - ads1x1x: added support for ADC chip

Pull Request - State: closed - Opened by korsarNek 10 months ago - 31 comments
Labels: reviewer needed

#6575 - Add mSLA capabilities

Pull Request - State: open - Opened by sn4k3 10 months ago - 10 comments
Labels: reviewer needed

#6571 - temperature_fan modified to have working pid option

Pull Request - State: closed - Opened by sunbowch 10 months ago - 2 comments
Labels: reviewer needed

#6560 - sensors: add sht31 support

Pull Request - State: closed - Opened by nefelim4ag 11 months ago - 9 comments
Labels: pending feedback

#6557 - Update python-can to 4.3.x for Python 3.12 and later

Pull Request - State: closed - Opened by nelsongraca 11 months ago - 11 comments
Labels: inactive, pending feedback

#6557 - Update python-can to 4.3.x for Python 3.12 and later

Pull Request - State: closed - Opened by nelsongraca 11 months ago - 10 comments
Labels: inactive, pending feedback

#6553 - Support for Flashforge Creator Pro2

Pull Request - State: open - Opened by eazrael 11 months ago - 20 comments
Labels: reviewer needed

#6553 - Support for Flashforge Creator Pro2

Pull Request - State: open - Opened by eazrael 11 months ago - 20 comments
Labels: reviewer needed

#6550 - Add setuptools to klippy requirements for python 3.12

Pull Request - State: closed - Opened by nelsongraca 11 months ago - 5 comments

#6544 - Add screws_tilt_adjust section to Ender 3 S1 config

Pull Request - State: open - Opened by WiseLord 11 months ago - 2 comments
Labels: reviewer needed

#6544 - Add screws_tilt_adjust section to Ender 3 S1 config

Pull Request - State: open - Opened by WiseLord 11 months ago - 2 comments
Labels: reviewer needed

#6542 - Hardcoded path in src/linux/main.c for sched.h

Issue - State: closed - Opened by cnf 11 months ago - 2 comments
Labels: not on github

#6525 - scripts: update greenlet to 3.0.3

Pull Request - State: closed - Opened by mkuf 12 months ago - 8 comments

#6514 - Basic support for memory-mapped IO on Raspberry Pi SBCs

Pull Request - State: open - Opened by liampwll 12 months ago - 5 comments
Labels: reviewer needed

#6498 - shaper_calibrate: Fixed crashes in SHAPER_CALIBRATE and TEST_RESONANCES

Pull Request - State: closed - Opened by dmbutyugin about 1 year ago - 1 comment

#6498 - shaper_calibrate: Fixed crashes in SHAPER_CALIBRATE and TEST_RESONANCES

Pull Request - State: closed - Opened by dmbutyugin about 1 year ago - 1 comment

#6497 - K1 carto initial

Pull Request - State: closed - Opened by mikebcbc about 1 year ago

#6497 - K1 carto initial

Pull Request - State: closed - Opened by mikebcbc about 1 year ago

#6496 - K1 carto initial

Pull Request - State: closed - Opened by mikebcbc about 1 year ago

#6496 - K1 carto initial

Pull Request - State: closed - Opened by mikebcbc about 1 year ago

#6495 - Non critical

Pull Request - State: closed - Opened by sbtoonz about 1 year ago

#6495 - Non critical

Pull Request - State: closed - Opened by sbtoonz about 1 year ago

#6491 - doc: Add required dependency to run numpy with python3 on RPI

Pull Request - State: closed - Opened by brujoand about 1 year ago - 5 comments

#6491 - doc: Add required dependency to run numpy with python3 on RPI

Pull Request - State: closed - Opened by brujoand about 1 year ago - 5 comments

#6490 - BDsensor: adding support for new probe sensor BDsensor

Pull Request - State: open - Opened by markniu about 1 year ago - 10 comments
Labels: reviewer needed

#6487 - scripts: Added shaper tuning parameters to calibrate_shaper script

Pull Request - State: closed - Opened by dmbutyugin about 1 year ago - 2 comments

#6485 - bed_mesh: support for Z in BED_MESH_OFFSET

Pull Request - State: closed - Opened by Arksine about 1 year ago - 5 comments

#6485 - bed_mesh: support for Z in BED_MESH_OFFSET

Pull Request - State: closed - Opened by Arksine about 1 year ago - 5 comments

#6483 - Remove extra bracket in Probe_Calibrate.md

Pull Request - State: closed - Opened by nmattia about 1 year ago - 3 comments

#6481 - Added package selection for HC32F460

Pull Request - State: closed - Opened by ggiraudon about 1 year ago - 2 comments

#6479 - controller_fan: add ability to watch temperature_sensors too

Pull Request - State: open - Opened by slaesh about 1 year ago - 12 comments
Labels: reviewer needed

#6479 - controller_fan: add ability to watch temperature_sensors too

Pull Request - State: open - Opened by slaesh about 1 year ago - 12 comments
Labels: reviewer needed

#6478 - Skew_Correction.md typo

Pull Request - State: closed - Opened by streetgt about 1 year ago - 5 comments

#6478 - Skew_Correction.md typo

Pull Request - State: closed - Opened by streetgt about 1 year ago - 5 comments

#6476 - Clarify on some requirements for adaptive meshing

Pull Request - State: closed - Opened by kyleisah about 1 year ago - 11 comments
Labels: inactive, pending feedback, reviewer needed

#6473 - bed_mesh: behavior fixes

Pull Request - State: closed - Opened by Arksine about 1 year ago - 4 comments

#6472 - fix virtual SD file position count

Pull Request - State: closed - Opened by zxy16305 about 1 year ago - 1 comment

#6471 - Update printer-sovol-sv06-plus-2023.cfg

Pull Request - State: closed - Opened by errantelectron about 1 year ago - 2 comments

#6469 - fix virtual SD file position count

Pull Request - State: closed - Opened by zxy16305 about 1 year ago - 2 comments

#6466 - Fix initial rp2040 SPI transfers

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 1 comment

#6465 - Update flash_usb.py

Pull Request - State: closed - Opened by luki343 about 1 year ago

#6464 - Load all code into ram on the rp2040

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 1 comment

#6463 - Make MCU Protocol mismatch error message more specific

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 8 comments
Labels: reviewer needed

#6463 - Make MCU Protocol mismatch error message more specific

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 8 comments
Labels: reviewer needed

#6461 - bed_mesh: Implement adaptive bed mesh

Pull Request - State: closed - Opened by voidtrance about 1 year ago - 53 comments

#6459 - Remove previously deprecated features

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 2 comments
Labels: reviewer needed

#6459 - Remove previously deprecated features

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 2 comments
Labels: reviewer needed

#6458 - Deprecate and remove support for uncommon options in output_pin

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 1 comment

#6457 - build(deps): bump jinja2 from 3.0.3 to 3.1.3 in /docs/_klipper3d

Pull Request - State: closed - Opened by dependabot[bot] about 1 year ago - 1 comment
Labels: dependencies

#6456 - build(deps): bump jinja2 from 2.11.3 to 3.1.3 in /scripts

Pull Request - State: closed - Opened by dependabot[bot] about 1 year ago - 2 comments
Labels: dependencies

#6455 - config: Add Creality Ender 5 S1.

Pull Request - State: closed - Opened by grnbrg about 1 year ago - 1 comment

#6453 - Improve scheduling of multi-mcu homing "trsync" messages

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago

#6453 - Improve scheduling of multi-mcu homing "trsync" messages

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago

#6450 - fix: a typo in a document Bed Mesh

Pull Request - State: closed - Opened by marbocub about 1 year ago - 4 comments

#6449 - Add 36KiB bootloader offset option

Pull Request - State: closed - Opened by JakubPrzystasz about 1 year ago - 3 comments
Labels: reviewer needed

#6448 - Controller fan idle speed

Pull Request - State: closed - Opened by bmkahl about 1 year ago

#6448 - Controller fan idle speed

Pull Request - State: closed - Opened by bmkahl about 1 year ago

#6447 - I3DBEEZ9 New board

Pull Request - State: closed - Opened by I3DBeeTech about 1 year ago - 5 comments

#6447 - I3DBEEZ9 New board

Pull Request - State: closed - Opened by I3DBeeTech about 1 year ago - 5 comments

#6446 - Add grouping for LEDs for use as separate chain on a single gpio

Pull Request - State: open - Opened by Elenedeath about 1 year ago - 4 comments
Labels: reviewer needed

#6445 - Add grouping for LEDs and correct not necessary stuff

Pull Request - State: closed - Opened by Elenedeath about 1 year ago - 1 comment

#6444 - serial_bridge: Add serial bridge module for communication with UART peripherals

Pull Request - State: closed - Opened by E4ST2W3ST about 1 year ago - 13 comments
Labels: inactive, pending feedback

#6442 - bulk sensors

Pull Request - State: closed - Opened by churls5495 about 1 year ago

#6442 - bulk sensors

Pull Request - State: closed - Opened by churls5495 about 1 year ago

#6441 - Make TRSYNC_TIMEOUT configurable

Pull Request - State: closed - Opened by EiNSTeiN- about 1 year ago - 2 comments

#6440 - Fix possible ordering issue if a callback blocks in button handler

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago

#6439 - Keep stepcompress move history relative to current time

Pull Request - State: closed - Opened by EiNSTeiN- about 1 year ago - 4 comments

#6438 - menu: Respect position_min for z axis.

Pull Request - State: open - Opened by bindertron about 1 year ago - 3 comments
Labels: reviewer needed

#6437 - Further simplifications to host and mcu bulk sensor code

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 8 comments

#6437 - Further simplifications to host and mcu bulk sensor code

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 8 comments

#6435 - filament_switch_sensor: send insert and runout events

Pull Request - State: closed - Opened by mdvorak about 1 year ago - 4 comments
Labels: reviewer needed

#6434 - Fixes for STM32G4 devices

Pull Request - State: closed - Opened by eamaclean about 1 year ago - 3 comments

#6433 - Fixes to mpu9250

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 9 comments

#6432 - Simplification of host bulk sensor code

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 5 comments

#6430 - virtual_sdcard: Open file in utf-8 encoding

Pull Request - State: closed - Opened by CODeRUS about 1 year ago - 9 comments
Labels: resolved, reviewer needed

#6430 - virtual_sdcard: Open file in utf-8 encoding

Pull Request - State: closed - Opened by CODeRUS about 1 year ago - 10 comments
Labels: resolved, reviewer needed

#6429 - feature: shutdown klipper when fan failure

Pull Request - State: closed - Opened by wuyoutech about 1 year ago - 18 comments
Labels: inactive, pending feedback

#6428 - tmc2240: Fixed the problem that the uart mode of tmc2240 cannot be enabled normally.

Pull Request - State: closed - Opened by kluoyun about 1 year ago - 3 comments
Labels: inactive, pending feedback

#6428 - tmc2240: Fixed the problem that the uart mode of tmc2240 cannot be enabled normally.

Pull Request - State: closed - Opened by kluoyun about 1 year ago - 3 comments
Labels: inactive, pending feedback

#6427 - Debian bookworm install

Pull Request - State: closed - Opened by BlackStump about 1 year ago - 3 comments

#6426 - Add rp2040 to MCUs with internal temp sensors

Pull Request - State: closed - Opened by RazorSh4rk about 1 year ago - 3 comments

#6425 - Pep8 compliance

Pull Request - State: closed - Opened by eoyilmaz about 1 year ago - 9 comments
Labels: not mainline

#6424 - Klipper3d master

Pull Request - State: closed - Opened by sbtoonz about 1 year ago

#6423 - Update generic-bigtreetech-skr-mini-e3-v3.0.cfg

Pull Request - State: closed - Opened by ExplicitChimp about 1 year ago - 4 comments
Labels: inactive, pending feedback, reviewer needed

#6421 - Klipper fails to build with Apple's cpp

Issue - State: closed - Opened by dottedmag about 1 year ago - 19 comments

#6420 - Add maximum_mcu_duration support to pwm_tool

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago - 1 comment

#6419 - Simplify integer "upconversion" host code

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago

#6419 - Simplify integer "upconversion" host code

Pull Request - State: closed - Opened by KevinOConnor about 1 year ago

#6417 - config: Update printer-sovol-sv06-2022.cfg x_offset

Pull Request - State: closed - Opened by bassamanator about 1 year ago - 5 comments

#6417 - config: Update printer-sovol-sv06-2022.cfg x_offset

Pull Request - State: closed - Opened by bassamanator about 1 year ago - 5 comments

#6416 - config: Update printer-sovol-sv06-2022.cfg to stock

Pull Request - State: closed - Opened by bassamanator about 1 year ago - 4 comments

#6416 - config: Update printer-sovol-sv06-2022.cfg to stock

Pull Request - State: closed - Opened by bassamanator about 1 year ago - 4 comments

#6415 - config: Add LDO Leviathan v1.2 generic config

Pull Request - State: closed - Opened by meteyou about 1 year ago - 5 comments

#6415 - config: Add LDO Leviathan v1.2 generic config

Pull Request - State: closed - Opened by meteyou about 1 year ago - 5 comments

#6414 - stats: add fan speed stats to log

Pull Request - State: closed - Opened by CODeRUS about 1 year ago - 6 comments
Labels: inactive, pending feedback, reviewer needed

#6414 - stats: add fan speed stats to log

Pull Request - State: closed - Opened by CODeRUS about 1 year ago - 6 comments
Labels: inactive, pending feedback, reviewer needed

#6413 - kinematics: Fix "Unable to infer active extruder stepper" errors.

Pull Request - State: closed - Opened by xtoddx about 1 year ago - 6 comments
Labels: inactive, pending feedback, reviewer needed

#6413 - kinematics: Fix "Unable to infer active extruder stepper" errors.

Pull Request - State: closed - Opened by xtoddx about 1 year ago - 9 comments
Labels: inactive, pending feedback, reviewer needed

#6411 - avr: enable low-level menuconfig options for 328 and 328p

Pull Request - State: closed - Opened by CODeRUS about 1 year ago - 1 comment

#6411 - avr: enable low-level menuconfig options for 328 and 328p

Pull Request - State: closed - Opened by CODeRUS about 1 year ago - 1 comment

GitHub / Klipper3d/klipper issues and pull requests