CoolProp/CoolProp issues and pull requests

#2411 - Bump actions/download-artifact from 3 to 4.1.7 in /.github/workflows

Pull Request - State: closed - Opened by dependabot[bot] 27 days ago - 1 comment
Labels: dependencies

#2410 - CoolProp - REFPROP computational overhead with different fluids in different Abstract States

Issue - State: closed - Opened by GiuSirianni about 1 month ago - 3 comments

#2409 - Can't open `https://coolprop.org` redirected to `https://.sourceforge.net/` end in "Site not found"

Issue - State: open - Opened by Dennis-89 about 1 month ago - 2 comments

#2408 - set_reference_state for RefProp fluids from the Python interface doesn't seem to work

Issue - State: open - Opened by jesse-gohl about 1 month ago

#2406 - Property Plots with python version 3.9 orhigher

Issue - State: open - Opened by MasterGPT9821 about 1 month ago - 2 comments

#2405 - How is defined reference enthalpy for a new added fluid in `PureFluid.py`?

Issue - State: open - Opened by bmazurie about 2 months ago - 1 comment

#2404 - Improve Robustness of IF97 Reverse (P,H) and (P,S) Evaluations Along Saturation Curve

Pull Request - State: closed - Opened by henningjp about 2 months ago - 2 comments

#2402 - Use temperature dependent hard sphere diameter for ion term in ePC-SAFT

Pull Request - State: open - Opened by zmeri about 2 months ago

#2401 - How to convert molar fraction and mass fraction? For example, R454B with a mass fraction of 0.2, find its mole fraction

Issue - State: closed - Opened by nnnnwinder 2 months ago - 2 comments

#2400 - CoolProp not able to compute subcooled liquid MM properties

Issue - State: open - Opened by Rikymark 2 months ago - 2 comments

#2397 - temperature input to temperature-quality flash is greater than critical temperature; T = 813.50 K, Tcrit = 647.10 K.

Issue - State: open - Opened by coward122 3 months ago - 1 comment

#2396 - Add link to `coolprop-mat` repo

Pull Request - State: closed - Opened by stephen-young 3 months ago - 3 comments

#2395 - Helium saturation routine bug

Issue - State: open - Opened by PerplexedFox 3 months ago - 1 comment

#2394 - Automatic Tests Failing Since February/April

Issue - State: open - Opened by henningjp 3 months ago - 5 comments
Labels: Build automation/tests

#2393 - REFPROP no loading/not found

Issue - State: closed - Opened by fbarbuto 3 months ago - 4 comments

#2392 - Critical point of a mixture

Issue - State: closed - Opened by fbarbuto 3 months ago - 4 comments

#2391 - CoolProp.dll has no versionnumber

Issue - State: open - Opened by chrishauptmannAtEsiGroup 3 months ago - 1 comment

#2388 - Low Pressure Saturation Calcs for HEOS::Water Failing after #2250

Issue - State: closed - Opened by henningjp 3 months ago - 1 comment

#2387 - Improve Robustness of IF97 Reverse (P,H) and (P,S) Evaluations Along Saturation Curve

Pull Request - State: closed - Opened by henningjp 4 months ago - 5 comments

#2386 - Cannot access Coolprop site

Issue - State: closed - Opened by augustinphilips 4 months ago - 3 comments

#2385 - R1336mzz(Z) fluid

Issue - State: open - Opened by MariaAguiar12 4 months ago - 1 comment

#2384 - Adding incompressible fluids during runtime (Python)

Issue - State: open - Opened by kakko3 4 months ago - 1 comment

#2383 - Error "PropsSI failed ungracefully" when calculating the viscosity of a mixture on the saturation liquid line

Issue - State: open - Opened by TRSloz 4 months ago - 1 comment

#2382 - Initialization error of some kind?

Issue - State: closed - Opened by paco600 4 months ago

#2381 - How to plot P-h and T-s plot for cascaded refrigeration system in python using coolprop.

Issue - State: open - Opened by Rishu2425 4 months ago - 1 comment

#2380 - Cannot use CoolProp in Excel anymore because add-in is not signed

Issue - State: open - Opened by wvillasmil 4 months ago - 3 comments

#2379 - Mixtures in C#

Issue - State: open - Opened by Ed-Tronics 4 months ago - 1 comment

#2378 - Abstract state triple point out of range error for REFPROP mixture

Issue - State: open - Opened by matlawicebox 5 months ago - 3 comments

#2376 - HAPropsSI returns "temperature = infinity"

Issue - State: open - Opened by emerdayton 5 months ago - 1 comment

#2374 - Update REFPROPMixtureBackend.cpp

Pull Request - State: open - Opened by birdol 5 months ago - 3 comments

#2373 - max() arg is an empty sequence

Issue - State: closed - Opened by ziyouliu 5 months ago - 2 comments

#2372 - Issue Installing libreoffice wrapper for LibreOffice 24.2

Issue - State: open - Opened by KamiGaAtaeta 5 months ago - 2 comments

#2371 - Thermal conductivity for parahydrogen can't be calculated for temperatures ranging between 30 and 50 K

Issue - State: closed - Opened by vins1996 6 months ago - 5 comments

#2367 - how to use Coolprop in visual studio community 2022

Issue - State: open - Opened by liuwei-kyushu 6 months ago - 4 comments

#2365 - Query HEOS Fluid Mixture R134a & Ethanol

Issue - State: open - Opened by AidanHumble 6 months ago - 1 comment

#2362 - update Excel-wrapper for Mac docs

Pull Request - State: closed - Opened by jonCAstickel 6 months ago - 2 comments

#2360 - Negative vapor and unsteady liquid quality caluculation for Helium

Issue - State: open - Opened by PerplexedFox 6 months ago - 5 comments

#2359 - CoolProp online vapor quality issue for water fluid

Issue - State: closed - Opened by mprogram 6 months ago - 2 comments

#2357 - R448A Compatibility

Issue - State: open - Opened by ImKanga 7 months ago - 2 comments

#2356 - PropSi returns erroneous values for NH3 in Excel

Issue - State: open - Opened by bwiencke 7 months ago - 2 comments

#2352 - PropsSI call converges using CoolProp but diverges using REFPROP as the backend

Issue - State: open - Opened by 8cold8hot 7 months ago - 6 comments

#2351 - Fix bug introduced by 443a2fd

Pull Request - State: closed - Opened by msaitta-mpr 8 months ago - 6 comments

#2350 - coolprop.org doesn't support HTTPS

Issue - State: open - Opened by softwareengineerprogrammer 8 months ago - 10 comments

#2349 - The docs are broken since md-January

Issue - State: closed - Opened by jowr 8 months ago - 3 comments

#2348 - Issue with the phase envelope on the PH diagram of some refirgerants (e.g., R245fa) for ORC cycle

Issue - State: open - Opened by nicolas-rangel 8 months ago - 4 comments

#2347 - Update CMakeLists.txt

Pull Request - State: closed - Opened by pkirkham 8 months ago - 1 comment

#2346 - Compilation failure for Java wrapper on MacOS

Issue - State: open - Opened by pkirkham 8 months ago - 2 comments

#2345 - Fix HEOS fugacity for mixtures in the two-phase region

Pull Request - State: open - Opened by friederikeboehm 8 months ago - 3 comments

#2344 - Problem with Neopentane in mixture

Issue - State: open - Opened by lorenz-ptb 9 months ago - 1 comment

#2342 - Include stdbool for C interface

Pull Request - State: closed - Opened by k-collie 9 months ago - 3 comments

#2341 - Update build process for LibreOffice wrapper

Pull Request - State: closed - Opened by spinnau 9 months ago - 5 comments

#2340 - Type Error using CoolProp 6.6.0 on Raspberry Pi4, python 3.9

Issue - State: open - Opened by hatfieldr 9 months ago - 14 comments

#2339 - Comment creer diagramme des phases avec Excel ?

Issue - State: open - Opened by Lachoseau 9 months ago

#2338 - Wrong values for temperature-dependent sigma of water in PC-SAFT

Issue - State: open - Opened by pw0908 9 months ago - 22 comments

#2337 - Strange question....R515B

Issue - State: closed - Opened by birdol 10 months ago - 2 comments

#2336 - INCOMP::AEG[0.5] is different from the ASHRAE HANDBOOK 2021 SI

Issue - State: open - Opened by birdol 10 months ago - 8 comments

#2335 - how to use low-level interface code in Incompressible Fluids?

Issue - State: closed - Opened by birdol 10 months ago - 5 comments

#2334 - PS Input Pair Gives Erroneous Result on Saturation Curve in IF97 Backend

Issue - State: closed - Opened by henningjp 10 months ago - 2 comments
Labels: bug, confirmed

#2333 - CO2 rich mixture with N2 fails with segmentation fault

Issue - State: open - Opened by Pablo-Salinas 10 months ago - 2 comments

#2332 - CO2 at 297.45 K

Issue - State: open - Opened by janlietaer 10 months ago - 1 comment

#2329 - Fix the triple points densities for R-1336mzz(E)

Pull Request - State: closed - Opened by ibell 10 months ago - 1 comment

#2326 - EntryPointNotFound after upgrade to newest version

Issue - State: open - Opened by MadsKirkFoged 10 months ago - 3 comments

#2325 - HEOS::R1336MZZE does not work properly

Issue - State: closed - Opened by jowr 10 months ago - 5 comments

#2324 - Fix base temperature and composition problems for incompressible fluids

Pull Request - State: closed - Opened by jowr 10 months ago - 1 comment

#2323 - Incompresible versions of CoolProp fluids

Pull Request - State: closed - Opened by jowr 10 months ago

#2322 - Actions for Mathcad

Pull Request - State: closed - Opened by jowr 10 months ago - 1 comment

#2320 - Food properties as incompressible liquids + ice

Pull Request - State: closed - Opened by jowr 10 months ago - 2 comments

#2319 - Value jumps with PSmass_INPUTS

Issue - State: open - Opened by qmichalski 10 months ago - 2 comments

#2318 - HS_INPUTS in tabular interpolation

Issue - State: open - Opened by Marcoliveti97 10 months ago - 14 comments

#2317 - New C Interface Functions

Pull Request - State: closed - Opened by CSchulzeTLK 10 months ago - 5 comments

#2315 - ValueError: unable to solve 1phase PY flash with Tmin=216.592, Tmax=3000 due to error: HSU_P_flash_singlephase_Brent could not find a solution because Smolar [104.507 J/mol/K] is below the minimum value of 109.154979176 J/mol/K : PropsSI("H","S",2374.624704,"P",100000,"CO2")

Issue - State: open - Opened by BryceLoski-rgb 11 months ago - 1 comment

#2313 - function load failed in DLL

Issue - State: closed - Opened by RookieLilG 11 months ago - 3 comments
Labels: invalid

#2310 - Wheels for Python 3.12

Issue - State: closed - Opened by angelo-peronio 11 months ago - 6 comments

#2309 - Addition of EoS JSON of R1336mzz(E) from Akasaka-IJT-2023

Pull Request - State: closed - Opened by jfreissmann 11 months ago - 6 comments

#2308 - Issue calculating molar fractions of every component out the biphase zone for a custom fluid modelled with AbstractState

Issue - State: open - Opened by vins1996 12 months ago - 5 comments

#2307 - Feature Request: Implementation of the novel Refrigerant R1336mzz(e) into HEOS Backend

Issue - State: closed - Opened by chrishauptmannAtEsiGroup 12 months ago - 5 comments
Labels: duplicate

#2306 - App name change: CuadernoDeProblemas -> pSolver, Update index.rst

Pull Request - State: closed - Opened by jfCoronel 12 months ago
Labels: invalid

#2305 - Release archives are missing the submodules

Issue - State: closed - Opened by ibell 12 months ago - 2 comments
Labels: invalid

#2303 - Complie CoolProp in Visual Studio 2013.

Issue - State: closed - Opened by lihy213 12 months ago
Labels: invalid

#2301 - try to make a STATIC_LIBRARY for Visual Studio 17 2022

Issue - State: closed - Opened by liuwei-kyushu 12 months ago - 11 comments
Labels: invalid

#2299 - CoolProp cannot import name '_constants'

Issue - State: closed - Opened by Odiur 12 months ago - 10 comments
Labels: invalid

#2298 - Viscosity and thermal conductivity lookups unavailable for Peng-Robinson and Redlich-Kwong EOS's

Issue - State: closed - Opened by chris-hampel-CA about 1 year ago - 3 comments

#2296 - Mathcad Wrapper README Formatting

Pull Request - State: closed - Opened by henningjp about 1 year ago

#2295 - Calculating enthalpy and entropy at exactly the middle value between min and max temperature does not work

Issue - State: closed - Opened by fwitte about 1 year ago - 4 comments

#2294 - Update Mathcad docs for pre-compiled and discontinuation of Legacy Mathcad [skip-ci]

Pull Request - State: closed - Opened by henningjp about 1 year ago - 4 comments

#2293 - Link CoolProp in C program language

Issue - State: closed - Opened by zhoulei3A about 1 year ago - 2 comments
Labels: invalid

#2292 - App name change: CuadernoDeProblemas -> pSolver, Update index.rst

Pull Request - State: closed - Opened by jfCoronel about 1 year ago
Labels: invalid

#2291 - Added second_partial_deriv and first_two_phase_deriv

Pull Request - State: closed - Opened by chrishauptmannAtEsiGroup about 1 year ago - 10 comments

#2290 - Warnings for format_as when compiling with fmtlib version 10.0.0

Issue - State: closed - Opened by friederikeboehm about 1 year ago - 4 comments
Labels: invalid

#2289 - Can't use user defined Tp limits in PropertyPlot in Python

Issue - State: open - Opened by HaSchneider about 1 year ago

#2288 - Google Apps Scipts function and python flask api.

Pull Request - State: open - Opened by qnikil7 about 1 year ago - 4 comments

#2286 - Add fugacity functions needed for compatability with `CoolProp.jl` pkg

Pull Request - State: closed - Opened by chris-hampel-CA about 1 year ago - 9 comments

#2285 - CoolProp 6.5.0 installed on Win 10, but TestExcel.xlsx is not showing values.

Issue - State: closed - Opened by Amardeepjyoti about 1 year ago - 4 comments

#2284 - Getting fugacity from the shared library

Issue - State: closed - Opened by jyoungca about 1 year ago - 4 comments

#2283 - Humid Air Props Errors with Multi-User environment

Issue - State: open - Opened by nikolamnaumovski about 1 year ago - 8 comments

#2280 - Feature Request / Question : Adding Custom Fluids

Issue - State: open - Opened by AndrewPrice775 about 1 year ago - 3 comments

#2279 - Add javascript to the release script

Pull Request - State: closed - Opened by jowr about 1 year ago

#2278 - Javascript Wrapper unable to compiled for version coolprop 6.5.0

Issue - State: closed - Opened by xpretycn about 1 year ago - 11 comments

#2277 - Update State class

Issue - State: closed - Opened by ibell about 1 year ago

#2276 - library bytes expected, but string delivered

Issue - State: open - Opened by kumado97 about 1 year ago - 12 comments

GitHub / CoolProp/CoolProp issues and pull requests