Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / BrunoLevy/learn-fpga issues and pull requests
#123 - trenz icezero added, note read TUTORIALS/IceZero.md for spi flash tools
Pull Request -
State: open - Opened by njheb 2 months ago
#121 - Add Sipeed Tangnano9k and Tangnano20k boards
Pull Request -
State: open - Opened by yrabbit 8 months ago
- 9 comments
#120 - Add Upduino board support
Pull Request -
State: open - Opened by m00dawg 9 months ago
#116 - Icebreaker FPGA UART communication garbage out
Issue -
State: open - Opened by kir486680 11 months ago
- 4 comments
#115 - Fix minor typo
Pull Request -
State: open - Opened by PoignardAzur about 1 year ago
#114 - Grammar Fix
Pull Request -
State: open - Opened by QuanDool about 1 year ago
#112 - Out of memory while generating hex for blinky in step 20, IceStick
Issue -
State: closed - Opened by dbenn over 1 year ago
- 3 comments
#111 - Rv32i quark Block diagram
Issue -
State: open - Opened by cicamargoba over 1 year ago
- 4 comments
#107 - Doom Nearest Neighbor scaling LUT implementation
Pull Request -
State: closed - Opened by M4rkoHR over 1 year ago
- 1 comment
#106 - Implement OLED for Doom
Pull Request -
State: closed - Opened by M4rkoHR over 1 year ago
- 7 comments
#104 - Interrupt handling, double triggering
Issue -
State: open - Opened by spectrumero over 1 year ago
- 2 comments
#103 - From Blinky to RiscV - porting to other HDLs
Issue -
State: open - Opened by BrunoLevy over 1 year ago
Labels: documentation, enhancement, help wanted
#102 - litex: Update radiona_ulx3s_ex target to fix makeit.sh script.
Pull Request -
State: closed - Opened by enjoy-digital over 1 year ago
#101 - ICESTICK: Serial: minor fix in makeit.sh
Pull Request -
State: closed - Opened by maxinbjohn over 1 year ago
#100 - FemtoRV/RTL/PROCESSOR/petitbateau: fix for Vivado
Pull Request -
State: closed - Opened by trabucayre over 1 year ago
#99 - Struggling to make LiteOS
Issue -
State: closed - Opened by JamesTimothyMeech over 1 year ago
- 31 comments
#98 - Why does make hello.prog use iceprog after running make ARTY.firmware_config?
Issue -
State: closed - Opened by JamesTimothyMeech over 1 year ago
- 1 comment
#97 - New board support for Digilent CMOD A7
Pull Request -
State: closed - Opened by bl0x over 1 year ago
#96 - Error when running make ARTY
Issue -
State: closed - Opened by JamesTimothyMeech over 1 year ago
- 7 comments
#95 - How to fit larger programs on the Icestick ULXS3 or Arty
Issue -
State: closed - Opened by JamesTimothyMeech over 1 year ago
- 1 comment
#94 - Which linker script should I be using with the ULX3S?
Issue -
State: closed - Opened by JamesTimothyMeech over 1 year ago
- 2 comments
#92 - Added support for ice4pi board
Pull Request -
State: closed - Opened by lightside-instruments over 1 year ago
#90 - FROM_BLINKER_TO_RISCV: no terminal output for step22.v on iCEstick
Issue -
State: closed - Opened by wohlbier almost 2 years ago
- 14 comments
#89 - FROM_BLINKER_TO_RISCV: step 19: verilator command does not work.
Issue -
State: closed - Opened by wohlbier almost 2 years ago
- 2 comments
#88 - typo fix (markdown format)
Pull Request -
State: closed - Opened by heartofrain almost 2 years ago
#87 - Step 7 Yields No Output
Issue -
State: open - Opened by usmank11 almost 2 years ago
- 15 comments
#86 - ice-sugar-nano: PLL avaliable but unused
Issue -
State: open - Opened by wingrime almost 2 years ago
#85 - comment/code mismatch FROM_BLINKER_TO_RISCV step 4 (?)
Issue -
State: closed - Opened by wohlbier almost 2 years ago
- 1 comment
#84 - FROM_BLINKER_TO_RISCV step 14 multiply simulates but doesn't run on IceStick
Issue -
State: open - Opened by dbenn almost 2 years ago
#83 - Fix reference to step9.v.
Pull Request -
State: closed - Opened by bl0x almost 2 years ago
#82 - Fix comment in step6.v
Pull Request -
State: closed - Opened by bl0x almost 2 years ago
- 1 comment
#81 - broken link
Issue -
State: closed - Opened by bl0x almost 2 years ago
- 1 comment
#80 - comment/code mismatch
Issue -
State: closed - Opened by bl0x almost 2 years ago
#79 - Building radiona_ulx3s_ex fails but the original LiteX python script works (ULX3s-12F)
Issue -
State: closed - Opened by M4rkoHR almost 2 years ago
- 1 comment
#77 - Issue connecting iCEstick Evaluation Kit
Issue -
State: open - Opened by AlhambraHS about 2 years ago
#76 - learn-fpga/FemtoRV/TUTORIALS/IceBreaker.md
Issue -
State: closed - Opened by mattbucknall about 2 years ago
- 1 comment
#75 - system miss the libboost_filesystem.so.1.71.0
Issue -
State: closed - Opened by ZhangPeterGree about 2 years ago
- 2 comments
#74 - Portability of tutorials to Upduino
Issue -
State: open - Opened by hexad about 2 years ago
- 5 comments
#73 - fail in make ICESTICK
Issue -
State: open - Opened by steven07210011 about 2 years ago
- 2 comments
#72 - Fixed error in riscv_assembly.v
Pull Request -
State: closed - Opened by yathAg over 2 years ago
- 1 comment
#71 - LiteOS will not compile for petitbateau variant
Issue -
State: closed - Opened by AEW2015 over 2 years ago
- 2 comments
#70 - Build problem due to previous commit
Issue -
State: closed - Opened by ethanrcampbell02 over 2 years ago
- 1 comment
#69 - Device Detection Error for Ice Stick
Issue -
State: open - Opened by knmurth over 2 years ago
- 1 comment
#68 - FemtoRV core comparison table
Pull Request -
State: closed - Opened by Mecrisp over 2 years ago
#67 - $cron-daily
Issue -
State: closed - Opened by farahmandakbar over 2 years ago
#66 - Icesugar-nano flash
Pull Request -
State: closed - Opened by abderraouf-adjal over 2 years ago
- 6 comments
#65 - Step 17 of FROM_BLINKER_TO_RISCV doesn't work for ULX3S
Issue -
State: open - Opened by samontab over 2 years ago
- 5 comments
#64 - Compile problem
Issue -
State: closed - Opened by darkstar007 over 2 years ago
- 2 comments
#63 - Not able to get any output from UART using Icestick
Issue -
State: open - Opened by r1cebank over 2 years ago
- 10 comments
#62 - Fiting logical operations into LUT4
Pull Request -
State: open - Opened by jeras over 2 years ago
- 2 comments
#61 - `quark` is stuck in an undefined state at reset in simulator with 4-state (`01xz`) support
Issue -
State: open - Opened by jeras over 2 years ago
- 14 comments
#60 - Individua
Pull Request -
State: closed - Opened by Mecrisp over 2 years ago
#59 - Asking about system bus protocol and simulation instructions.
Issue -
State: open - Opened by jeras over 2 years ago
- 12 comments
#58 - Issue with milliseconds() function
Issue -
State: closed - Opened by NaitikSanas over 2 years ago
- 1 comment
#57 - Disable auto remove the .o .elf .bin files
Issue -
State: closed - Opened by NaitikSanas almost 3 years ago
- 3 comments
#56 - Add OSX support
Pull Request -
State: closed - Opened by Grazfather almost 3 years ago
#55 - How to add my own peripheral?
Issue -
State: closed - Opened by ladmanj almost 3 years ago
- 8 comments
#54 - ARTY install & example
Issue -
State: closed - Opened by suarezvictor almost 3 years ago
#53 - Proof-of-concept draft: Add a simple vector extension to femtorv
Pull Request -
State: open - Opened by mbitsnbites almost 3 years ago
#52 - SDRAM controller and simulation with Icarus
Pull Request -
State: closed - Opened by Mecrisp almost 3 years ago
#51 - Demos do not compile
Issue -
State: closed - Opened by darkstar007 almost 3 years ago
- 8 comments
#50 - Clarification on SDRAM chip on ULX3S for Litex
Issue -
State: closed - Opened by darkstar007 almost 3 years ago
- 7 comments
#49 - WIP: Icesugar support
Pull Request -
State: open - Opened by piso77 almost 3 years ago
- 3 comments
#48 - Fixed bit width of NRV_TWOLEVEL_SHIFTER in Quark
Pull Request -
State: closed - Opened by Mecrisp about 3 years ago
- 1 comment
#47 - Coprocessor / custom function unit interface
Issue -
State: open - Opened by tcal-x about 3 years ago
- 3 comments
#46 - FemtoRV/TOOLS/get_symbiflow.sh: fix env create
Pull Request -
State: closed - Opened by trabucayre about 3 years ago
- 1 comment
#45 - How long it takes to synthetize the Toolchain in Arty 35T ?
Issue -
State: closed - Opened by benitoss over 3 years ago
- 4 comments
#44 - Basic/FOMU/FOMU_blink/makeit.sh: recognize different types of board (FOMU_REV)
Pull Request -
State: open - Opened by vazhnov over 3 years ago
- 6 comments
#43 - Fomu tutorial fix
Pull Request -
State: closed - Opened by vazhnov over 3 years ago
- 1 comment
#42 - Debug support re-using existing blocks
Issue -
State: open - Opened by likewise over 3 years ago
- 1 comment
#41 - typo in the verilog file : MappedSPIFlash.v
Issue -
State: closed - Opened by KiranKanchi over 3 years ago
- 1 comment
#40 - Initial values for simulation
Issue -
State: closed - Opened by pftbest over 3 years ago
- 1 comment
#39 - ICESUGAR target fails to build
Issue -
State: open - Opened by piso77 over 3 years ago
- 7 comments
#38 - Errors in UART read
Issue -
State: closed - Opened by BrunoLevy over 3 years ago
- 2 comments
Labels: ULX3S
#37 - Minor changes to toolchain installation instructions; Raspberry Pi and Jetson support
Pull Request -
State: closed - Opened by bjepson over 3 years ago
- 3 comments
#36 - Generate issue
Pull Request -
State: closed - Opened by corerd over 3 years ago
- 4 comments
#35 - SPI_FLASH_FAST_READ_DUAL_IO and Winbond W25Q32JV.
Issue -
State: closed - Opened by at91rm9200 over 3 years ago
- 2 comments
#34 - Possible problem with SPI_FLASH_FAST_READ_DUAL_OUTPUT driver.
Issue -
State: closed - Opened by at91rm9200 over 3 years ago
- 1 comment
#33 - Difficulties to follow the IceStick Tutorial.
Issue -
State: closed - Opened by at91rm9200 almost 4 years ago
- 7 comments
#32 - FemtoRV32_VIII.md: fix typo
Pull Request -
State: closed - Opened by lnussbaum almost 4 years ago
#31 - Generic bidirectional GPIO peripheral
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
Labels: enhancement
#30 - First character sent to the UART is smashed
Issue -
State: closed - Opened by BrunoLevy almost 4 years ago
- 2 comments
Labels: bug
#29 - Faster SPI flash controller
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
- 11 comments
Labels: enhancement
#28 - NRV_RESET_ADDR into SPI Flash does not work
Issue -
State: closed - Opened by BrunoLevy almost 4 years ago
- 1 comment
Labels: bug, IceStick
#27 - UART restart
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
- 1 comment
Labels: bug, IceStick
#25 - Priviledged instruction set
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
- 1 comment
Labels: enhancement
#24 - SDRAM
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
- 1 comment
Labels: enhancement
#23 - I2C driver
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
Labels: enhancement
#22 - Keyboard and mouse
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
- 2 comments
Labels: enhancement, help wanted
#21 - FOMU: UART over USB
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
- 7 comments
Labels: help wanted, FOMU
#20 - FuseSOC
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
- 1 comment
Labels: enhancement, help wanted
#19 - Run from SPI FLASH does not work
Issue -
State: closed - Opened by BrunoLevy almost 4 years ago
- 2 comments
Labels: bug
#18 - ULX3S: use ESP32
Issue -
State: closed - Opened by BrunoLevy almost 4 years ago
- 1 comment
Labels: enhancement, ULX3S
#17 - ULX3S: use PWR instead of F2 to reset
Issue -
State: open - Opened by BrunoLevy almost 4 years ago
Labels: enhancement, ULX3S
#16 - Demo programs on the SSD1331
Issue -
State: closed - Opened by BrunoLevy almost 4 years ago
Labels: enhancement
#15 - No tty output with SSD1331 screen
Issue -
State: closed - Opened by BrunoLevy almost 4 years ago
#14 - [optimize] can we have a general spi controller
Issue -
State: open - Opened by wuxx almost 4 years ago
- 1 comment
Labels: enhancement
#13 - commit support for iCESugar & iCESugar-nano board
Pull Request -
State: closed - Opened by wuxx almost 4 years ago
- 1 comment
#12 - #11 Add more icefeather docs
Pull Request -
State: closed - Opened by whatnick almost 4 years ago