Ecosyste.ms: Issues
An open API service for providing issue and pull request metadata for open source projects.
GitHub / AndrewEllis93/Print-Tuning-Guide issues and pull requests
#100 - Pause/Resume, Filament Swaps & Sensors Macro - Weak Seam
Issue -
State: open - Opened by gray916 11 months ago
#99 - Pause macro with BTT Smart Filament Sensor V2
Issue -
State: open - Opened by drpeej 11 months ago
- 1 comment
#98 - Abnormal grooves on the top layer
Issue -
State: open - Opened by changxxxxx 12 months ago
#97 - Tachometer Fan Guide for Canbus users need diode
Issue -
State: open - Opened by waxall 12 months ago
- 1 comment
#96 - Extrusion Multiplier Results Highly Dependent on Nozzle Temperature
Issue -
State: open - Opened by TristanScott44 about 1 year ago
#95 - Questions about first layer temperatures w/r/t LA?
Issue -
State: open - Opened by Lyude about 1 year ago
#94 - issue with Extrusion Multiplier test
Issue -
State: open - Opened by iceman2511 about 1 year ago
#93 - Suggestion for Tutorial Page
Issue -
State: open - Opened by PuterPro about 1 year ago
- 2 comments
#92 - Relative Reference Index deprecated
Issue -
State: open - Opened by agreen about 1 year ago
#91 - Extrusion Multiplier Page is outdated?
Issue -
State: open - Opened by Strudel66 about 1 year ago
- 1 comment
#90 - Pausing before print start
Issue -
State: closed - Opened by Dfwsb2 about 1 year ago
- 1 comment
#89 - Cura First Layer Line Width
Issue -
State: open - Opened by Senorgif2 about 1 year ago
#88 - Issue with volumetric flow rate instructions
Issue -
State: open - Opened by garyd9 about 1 year ago
#87 - Passing Slicer Variables to a Macro for Simplify 3D
Issue -
State: open - Opened by funboard29 about 1 year ago
- 1 comment
#86 - Add OrcaSlicer Please
Issue -
State: open - Opened by scottharry81 about 1 year ago
#85 - Expectations with sensorless homing wrt minor skipping with TEST_SPEED
Issue -
State: open - Opened by Gallion about 1 year ago
- 3 comments
#84 - fix klipper new rotation distance formula.
Pull Request -
State: closed - Opened by quarkvalk about 1 year ago
- 1 comment
#83 - License?
Issue -
State: open - Opened by natescherer over 1 year ago
#82 - TEST_SPEED Macro Move out of range
Issue -
State: open - Opened by seanmccully over 1 year ago
- 9 comments
#81 - Dead end SuperSlicer - plans for afterwards?
Issue -
State: open - Opened by hpoperator over 1 year ago
#80 - Update TEST_SPEED.cfg
Pull Request -
State: open - Opened by Vykori over 1 year ago
- 4 comments
#79 - PA tool legend separates easily if extruder not primed well
Issue -
State: open - Opened by evilC over 1 year ago
- 1 comment
Labels: feature request
#78 - Broken link under section [Tuning Pressure Advance / Linear Advance Lines Method (DEPRECATED)]
Issue -
State: closed - Opened by Nandox7 over 1 year ago
- 1 comment
#77 - Extruder Calibration - Step 8 - incorrect Klipper equation
Issue -
State: open - Opened by Wood578Guy over 1 year ago
- 2 comments
Labels: bug
#76 - Broken link under cooling and layer times
Issue -
State: closed - Opened by metzgarj over 1 year ago
- 1 comment
Labels: bug
#75 - Extrusion Multiplier > Steps > PrusaSlicer - information provided is incorrect, there IS a way, and it's easier than your SS instructions
Issue -
State: closed - Opened by hiltonjanfield over 1 year ago
- 4 comments
Labels: duplicate, feature request
#74 - EM Calibration with PrusaSlicer
Issue -
State: open - Opened by jleutgeb1 over 1 year ago
- 4 comments
Labels: feature request
#73 - Add note about "step_pulse_duration" directive required for Mellow boards to layer shifting article
Issue -
State: open - Opened by eltoozero over 1 year ago
- 1 comment
Labels: detail request
#72 - Link leads to 404
Issue -
State: closed - Opened by 3lementalS over 1 year ago
- 2 comments
Labels: bug
#71 - Enable light mode or theme option on new website
Issue -
State: open - Opened by lazer15 over 1 year ago
- 1 comment
Labels: feature request
#70 - Problems with the surface - please help!
Issue -
State: open - Opened by hpoperator over 1 year ago
- 2 comments
Labels: troubleshooting help
#69 - Section "Retraction"
Issue -
State: open - Opened by Roycinger over 1 year ago
Labels: detail request
#68 - EM File - Cura Flow
Issue -
State: closed - Opened by plano-harry over 1 year ago
- 1 comment
#67 - Cura flow rate is not the same for each feature
Issue -
State: closed - Opened by dewi-ny-je over 1 year ago
- 1 comment
#66 - TEST_SPEED Sending X Axis past Set Maximum
Issue -
State: open - Opened by bailboy91 over 1 year ago
- 13 comments
Labels: bug
#65 - First Layer Squish on delta question
Issue -
State: closed - Opened by alexeyzel over 1 year ago
- 1 comment
#64 - New Z-Offset Calibration Method
Issue -
State: open - Opened by alexrmay91 over 1 year ago
- 2 comments
Labels: feature request
#63 - Question for PA Test
Issue -
State: closed - Opened by xenon2008 over 1 year ago
- 2 comments
#62 - TEST_SPEED crashes nozzle into bed after run completes.
Issue -
State: closed - Opened by bassamanator over 1 year ago
- 3 comments
Labels: bug
#61 - Stepper stutters while doing the speed test
Issue -
State: open - Opened by fabiandj64 over 1 year ago
- 1 comment
Labels: bug
#60 - Cause of Pockmarks
Issue -
State: open - Opened by 999Chilly over 1 year ago
Labels: detail request
#59 - Pressure Advance Calibration Tool
Issue -
State: open - Opened by juliusjj25 over 1 year ago
Labels: feature request
#58 - PETG overhangs tips
Issue -
State: open - Opened by luco85 over 1 year ago
Labels: feature request
#57 - Test pattern prints in the wrong place
Issue -
State: closed - Opened by Mark-Dunn-OIL over 1 year ago
- 2 comments
#56 - Bulging on seams
Issue -
State: open - Opened by AMFkuna over 1 year ago
- 1 comment
Labels: troubleshooting help
#55 - Ever tried using "max line overlap"?
Issue -
State: open - Opened by mcjohn57 over 1 year ago
Labels: theorycrafting
#54 - Consider mentioning nonlinear extrude for RRF on "PA/EM Oddities"
Issue -
State: open - Opened by oliof over 1 year ago
Labels: detail request
#53 - Dynamic acceleration / square corner velocity (jerk)
Issue -
State: closed - Opened by Henk72 over 1 year ago
- 3 comments
#52 - TEST_SPEED macro that prints
Issue -
State: open - Opened by trx1 over 1 year ago
- 1 comment
Labels: feature request
#51 - Pressure advance tool
Issue -
State: closed - Opened by chrstrvs almost 2 years ago
- 1 comment
#50 - Bulging caused by Arachne
Issue -
State: open - Opened by Clon1998 almost 2 years ago
- 4 comments
Labels: detail request
#49 - Instructions for 24V fans using tachometer pin don't work well
Issue -
State: open - Opened by Borfonius almost 2 years ago
- 15 comments
Labels: bug, detail request
#48 - hyperlinked Amazon product page for BTT Smart Filament Sensor is incorrect
Issue -
State: closed - Opened by blkqi almost 2 years ago
- 2 comments
#47 - small typo (swapped letters)
Issue -
State: closed - Opened by cyberhuman almost 2 years ago
- 1 comment
#46 - Gantry Squaring Suggestion
Issue -
State: closed - Opened by IRTrail almost 2 years ago
- 1 comment
#45 - The best way to calibrate pressure advance!
Issue -
State: closed - Opened by Tapap84 almost 2 years ago
- 4 comments
#44 - Pressure Advance Calibration tool
Issue -
State: closed - Opened by pki791 almost 2 years ago
- 1 comment
#43 - Input shaping
Issue -
State: open - Opened by I55UES almost 2 years ago
- 1 comment
Labels: feature request
#42 - No fan speed in new PA tuning tool
Issue -
State: closed - Opened by Allidoisowen almost 2 years ago
- 1 comment
#41 - Inconsistent Order of the first Print Tuning steps.
Issue -
State: closed - Opened by ebrithiljonas almost 2 years ago
- 1 comment
#40 - TEST_SPEED macro on Delta printers
Issue -
State: closed - Opened by PerLangkjaer almost 2 years ago
- 18 comments
#39 - Example voron2 klipper configs missing
Issue -
State: closed - Opened by evilphish almost 2 years ago
- 8 comments
#38 - Add a simple trick for quickly arranging patches
Pull Request -
State: closed - Opened by dflemstr almost 2 years ago
- 1 comment
#37 - Klipper resume after power loss
Issue -
State: closed - Opened by LuckWizard almost 2 years ago
- 2 comments
#36 - Print Tuning Guide
Issue -
State: closed - Opened by Bobawowa almost 2 years ago
- 1 comment
#35 - Determining Maximum Volumetric Flow Rate
Issue -
State: closed - Opened by jchidley almost 2 years ago
- 1 comment
#34 - EM Automation with PrusaSlicer
Issue -
State: closed - Opened by julian-weinert about 2 years ago
- 1 comment
#33 - Commit description
Issue -
State: closed - Opened by dewi-ny-je about 2 years ago
- 2 comments
#32 - Optional filters for DUMP_PARAMETERS macro
Pull Request -
State: closed - Opened by FatalBulletHit about 2 years ago
- 6 comments
#31 - Hi , i read your Print guide, great work, but 1 misstake
Issue -
State: closed - Opened by Kaicura about 2 years ago
- 2 comments
#30 - Can you please add some guide for the labeled extrusion multiplier cubes?
Issue -
State: closed - Opened by samuellazea about 2 years ago
- 3 comments
#29 - Retraction Test 45 degree bug
Issue -
State: closed - Opened by SirRenix about 2 years ago
- 2 comments
#28 - Twisted/skewed frame
Issue -
State: closed - Opened by dewi-ny-je about 2 years ago
- 2 comments
#27 - Frame temperature compensation
Issue -
State: closed - Opened by Markus-1984 about 2 years ago
- 1 comment
#26 - FR: "Back to Table of Contents" on page bottom
Issue -
State: closed - Opened by Dingushippo over 2 years ago
- 1 comment
#25 - Update setting_expectations.md
Pull Request -
State: closed - Opened by ardichoke over 2 years ago
- 1 comment
#24 - TEST_SPEED macro accuracy issue with hall-effect endstop
Issue -
State: closed - Opened by linyongzheng over 2 years ago
- 5 comments
#23 - Single Page Guide
Issue -
State: closed - Opened by disney7 over 2 years ago
- 2 comments
#22 - PrusaCode will not working
Issue -
State: closed - Opened by 4noxx over 2 years ago
- 2 comments
#21 - Question: Is temperature calibration included in this guide?
Issue -
State: closed - Opened by Elec-theo over 2 years ago
- 5 comments
#20 - FR: hope we can include in the pressure advance lines method a bed for delta printers
Issue -
State: closed - Opened by jpbnto over 2 years ago
- 10 comments
#19 - Update pressure_advance.md for Voron 0
Pull Request -
State: closed - Opened by emolitor over 2 years ago
- 1 comment
#18 - fix Link to macro
Issue -
State: closed - Opened by Moulebutz over 2 years ago
- 1 comment
#17 - Kudos
Issue -
State: closed - Opened by Ataraksia over 2 years ago
- 1 comment
#16 - Final G28 after BED_MESH_CALIBRATE?
Issue -
State: closed - Opened by msteele999 over 2 years ago
- 1 comment
#15 - Input shaping: before PA
Issue -
State: closed - Opened by dewi-ny-je over 2 years ago
- 4 comments
#14 - Consider additional to layer shifting section
Issue -
State: closed - Opened by johnssarris over 2 years ago
- 2 comments
#13 - Cura does have per object Extrusion Multiplier (Flow) settings.
Issue -
State: closed - Opened by atoomnetmarc over 2 years ago
- 1 comment
#12 - TEST_SPEED macro considerations for CoreXZ machines (ie, Switchwire)
Issue -
State: closed - Opened by sloscotty over 2 years ago
- 6 comments
#11 - add start/end notifications for easier spotting and parsing of klippy.log
Pull Request -
State: closed - Opened by geoffrey-young over 2 years ago
- 4 comments
#10 - Pressure advance and part mechanical strength
Issue -
State: closed - Opened by elcrni over 2 years ago
- 2 comments
#9 - Issues With SuperSlicer Profiles
Issue -
State: closed - Opened by Declan0811 over 2 years ago
- 2 comments
#8 - Update README.md
Pull Request -
State: closed - Opened by bythorsthunder over 2 years ago
#7 - Updated PRINT_START macro template variable syntax
Pull Request -
State: closed - Opened by scoozza over 2 years ago
- 3 comments
#6 - improved loop for testing speeds
Pull Request -
State: closed - Opened by legend069 over 2 years ago
- 14 comments
#5 - Broken PA & EM link?
Issue -
State: closed - Opened by millerlarson over 2 years ago
- 1 comment
#4 - Update to use the new Klipper PA tool
Pull Request -
State: closed - Opened by RealDeuce over 2 years ago
- 1 comment
#3 - Determining Maximum Speeds and Accelerations
Issue -
State: closed - Opened by gknops over 2 years ago
- 3 comments
#2 - Update README.md
Pull Request -
State: closed - Opened by mpilar almost 3 years ago
#1 - Also use `Z_OFFSET_APPLY_PROBE` for Klicky
Pull Request -
State: closed - Opened by SomeoneWeird almost 3 years ago
- 4 comments